Abstract:The response characteristics of seated human subjects exposed to fore-aft (x-axis) and lateral (y-axis) vibration are investigated through measurements of dynamic interactions between the seated body and the seat pan, and the upper body and the seat backrest. The experiments involved: (i) three different back support conditions (no back support, and upper body supported against a vertical and an inclined backrest); (ii) three different seat pan heights (425, 390 and 350 mm); and three different magnitudes (0.25, 0.5 and 1.0 m/s2 rms acceleration) of band limited random excitations in the 0.5-10 Hz frequency range, applied independently along the fore-aft and lateral directions in an uncoupled manner. The body force responses, measured at the seat pan and the backrest along the direction of motion, are applied to characterize the total body apparent mass (APMS) reflected on the seat pan, and those of the upper body reflected on the backrest. Unlike the widely reported responses of seated occupants under vertical vibration, the responses to horizontal vibration show strong effect of excitation magnitude. The large displacements at lower frequencies cause considerable rotations of the upper body, and the knees and ankles, particularly when seated without a back support, which encouraged the occupants to continually shift larger portion of the body weight towards their feet. This together with the strong dependence on the excitation magnitude resulted in considerable inter-subject variability of the data. The addition of a back support causes stiffening of the body to limit the low frequency rocking motion of the upper body under x-axis motion, while considerable dynamic interactions with the backrest occur. The mean apparent mass (APMS) responses measured at the seat pan and the backrest suggest strong contributions due to the back support condition, and the direction and magnitude of horizontal vibration, while the role of seat height is important only in the vicinity of the resonant frequencies. In the absence of a back support, the seat pan responses predominate at a lower frequency (near 0.7 Hz) under both directions of motion, while two secondary peaks in the magnitude also occur at relatively higher frequencies. The addition of back support causes the seat pan response to converge mostly to a single primary peak, resulting in a single-degree-of-freedom like behavior, with peak occurring in the 2.7-5.4 Hz range under x-axis, and 0.9-2.1 Hz range under y-axis motions, depending upon the excitation magnitude and the back support condition. This can be attributed to the stiffening of the body in the presence of the constraints imposed by the backrest. A relaxed posture with an inclined backrest, however, causes a softening effect, when compared to an erect posture with a vertical backrest. The backrest, however, serves as another source of vibration to the seated occupant, which tends to cause considerably higher magnitude responses. The considerable magnitudes of the apparent mass response measured at the seat back under fore-aft motions suggest strong interactions with the backrest. Such interactions along the side-to-side motions, however, are relatively small. The results suggest that the biodynamic characterization of seated occupants exposed to horizontal vibration requires appropriate considerations of the interactions with the backrest.

Vibration analysis of human body under seating posture: an automobile application

Analytical and Numerical Investigations of Mechanical Vibration in the Vertical Direction of a Human Body in a Driving Vehicle using Biomechanical Vibration Model

Vibration Study in Human-Car Seat System: Overview and a Novel Simulation Technique

Ride comfort and segmental vibration transmissibility analysis of an automobile passenger model under whole body vibration

Effects of seat back height and posture on 3D vibration transmission to pelvis, trunk and head

Modelling and simulation of an integrated human-vehicle system with non-linear cushion contact force

Ride Comfort Analysis of Seated Occupants Based on an Integrated Vehicle-Human Dynamic Model

Finite Element Modelling of Car Seat with Hyperelastic and Viscoelastic Foam Material Properties to Assess Vertical Vibration in Terms of Acceleration

Localised apparent masses over the interface between a seated human body and a soft seat during vertical whole-body vibration

Experimental research on automobile human-seat system vibration characteristic and body pressure distribution

Modeling of a seated human body exposed to vertical vibrations in various automotive postures

A Nonlinear Biodynamic Model of Seated Human Body Exposed to Vertical Vibration with Sensitivity Analysis

Ride Comfort Analysis of Motor Vehicles using Analytical and Experimental Procedures

Effects of elastic seats on seated body apparent mass responses to vertical whole body vibration

Influence of back support conditions on the apparent mass of seated occupants under horizontal vibration

Modelling of seated human body exposed to combined vertical, lateral and roll vibrations

Biomechanical Response of the Musculoskeletal System to Whole Body Vibration Using a Seated Driver Model

Modelling and analysis of coupled vibration of human body in the sagittal and coronal planes exposed to vertical, lateral and roll vibrations and the comparison with modal test

Seat pan angle optimization for vehicle ride comfort using finite element model of human spine

Study on Pressure Distribution and Vibration Characteristics of Human-Chair Interface under Horizontal Vibration

Vibration reduction of human body biodynamic response in sitting posture under vibration environment by seat backrest support