Modelling and simulation of an integrated human-vehicle system with non-linear cushion contact force

Raj Desai,Anirban Guha,P. Seshu

DOI: https://doi.org/10.1016/j.simpat.2020.102206

IF: 4.199

2021-01-01

Simulation Modelling Practice and Theory

Abstract:Driver comfort is related to human-seat interaction forces and the seat suspension system. For a human body subjected to vertical seat vibration, the head exhibits vertical as well as fore-aft motion, which leads to high forces in the neck. In order to capture these effects, a detailed 12 degrees of freedom two-dimensional seated human body model with inclined backrest support is developed to study direct and cross-axis seat to head transmissibility. The human model is then integrated with a non-linear cushion-human interaction model. The cushion parameters are obtained using a genetic algorithm and a global criterion-based scheme to minimize the least square difference between experimental contact force-time signal and analytical results. Subsequently, the human body model, along with a non-linear seat cushion model, are incorporated into a full vehicle model. Seat suspension parameters are obtained by minimizing the seat effective amplitude transmissibility and human body comfort factors. Both random road excitation and sudden bumps on the road have been studied. The influence of the human body's position in the vehicle and parameter sensitivity with respect to cushion-human interaction force, vertical and fore-aft head acceleration are investigated for multi-compression damper with an inclined damper-seat suspension system. The angle of inclination of the damper has been found to be the parameter with the highest sensitivity. These results and the modelling methodology are expected to lead to a better way of analyzing biodynamic response of the driver.

computer science, interdisciplinary applications, software engineering

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is the discomfort of drivers caused by seat vibration during vehicle driving, especially the high - force transmission problem in the head and neck. Specifically, the paper focuses on the interaction forces between the human body and the seat and the influence of the seat suspension system on driver comfort. To study these problems, the author developed a detailed two - dimensional sitting - posture human body model with 12 degrees of freedom. This model takes into account the inclination angle of back support and can simulate the direct and cross - axial seat - to - head transfer characteristics. In addition, this model also integrates a nonlinear seat - cushion - human - body interaction model, and the cushion parameters are optimized by the genetic algorithm to minimize the least - squares difference between the experimental contact force - time signal and the analysis results. Finally, this human body model is integrated into a complete vehicle model, and the effective amplitude transmissibility of the seat and human comfort factors are reduced by optimizing the seat suspension parameters. The paper also studies the influence of random road surface excitation and sudden roadblocks on the system, and explores the influence of the position of the human body in the vehicle and parameter sensitivity on the cushion - human - body interaction force, vertical and front - rear head accelerations. These research results and modeling methods are expected to provide a better way to analyze the biodynamic responses of drivers.

Modelling and simulation of an integrated human-vehicle system with non-linear cushion contact force

Adaptive control of a vehicle-seat-human coupled model using quasi-zero-stiffness vibration isolator as seat suspension

Model-Free Adaptive Control of an Active Half-Vehicle-Seat System Coupled with a Nonlinear Energy Sink Inerter (NESI)

Modelling human seat contact interaction for vibration comfort

Seat pan angle optimization for vehicle ride comfort using finite element model of human spine

Vibration Study in Human-Car Seat System: Overview and a Novel Simulation Technique

Coupled occupant-suspension-seat system analysis and vehicle-specific design optimization

Vibration analysis of human body under seating posture: an automobile application

Measurement and modelling of x-direction apparent mass of the seated human body-cushioned seat system

Ride Comfort Analysis of Seated Occupants Based on an Integrated Vehicle-Human Dynamic Model

Evaluation of motion comfort using advanced active human body models and efficient simplified models

Analytical and Numerical Investigations of Mechanical Vibration in the Vertical Direction of a Human Body in a Driving Vehicle using Biomechanical Vibration Model

Performance Investigation of Integrated Model of Quarter Car Semi-Active Seat Suspension with Human Model

Finite Element Modelling of Car Seat with Hyperelastic and Viscoelastic Foam Material Properties to Assess Vertical Vibration in Terms of Acceleration

Finite element modelling of human-seat interactions: vertical in-line and fore-and-aft cross-axis apparent mass when sitting on a rigid seat without backrest and exposed to vertical vibration

Modeling of a seated human body exposed to vertical vibrations in various automotive postures

Modelling of seated human body exposed to combined vertical, lateral and roll vibrations

Simulating vibration transmission and comfort in automated driving integrating models of seat, body, postural stabilization and motion perception

Multi-objective Optimization of Vehicle Seat Suspension with Friction under Random Excitation

Developing a simplified finite element model of a car seat with occupant for predicting vibration transmissibility in the vertical direction

The impact of body and head dynamics on motion comfort assessment