Abstract:Discontinuously reinforced titanium matrix composites (DRTMCs) with network structure have attracted much attention in recent years due to their superior strengthening effect and ductility. To figure out their microstructure characteristics of the as-rolled network-structured composites under different rolling temperatures, hot rolling deformation processes at α+β region, upper α+β region, β region were performed on a series of TiB whiskers reinforced Ti–6.5Al–2Zr–1Mo–1V–0.3Si (TA15) composites (TiB/TA15–Si). The results showed that with the increase of rolling temperature, primary α (αp) phases and silicides gradually decreased, while transformed β (βT) phases, secondary α (αs) phases and TiB aspect ratio gradually increased, which is attributed to the phase transformation, Si dissolution and lower deformation resistance. And the silicides were fractured into several parts at 900 oC due to the low solid solubility and excessive growth. Besides, the composite rolled at α+β region exhibited dominant dynamic recrystallization (DRX) of α phase, while the composite rolled at β region presented an elongated deformation of prior β phase inside the network and DRX behavior near the network. With the increasing rolling temperature, the composites showed an increasing trend in strength and a decreasing trend in ductility. The composite rolled at 1100 oC can obtain better overall ultimate tensile strengths of 1260 MPa (at RT), 843 MPa (at 600 oC), 729 MPa (at 650 oC) and 595 MPa (at 700 oC), which increased by 13.4%, 38.2%, 36.3%, 21.9% compared with those of the as-sintered composite, respectively. The superior strengthening mechanism of the as-rolled composites can be mainly attributed to grain refining of the matrix and load transfer of TiB.

Effects of Sinusoidal Vibration of Crystallization Roller on Microstructure and Mechanical Properties of Ti/Al Laminated Composites by Twin-Roll Casting

Effects of Direct Rolling Deformation on the Microstructure and Tensile Properties of the 2.5 Vol% (tibw+ticp)/ti Composites

Microstructure Evolution and Tensile Properties of As-Rolled TiB/TA15 Composites with Network Microstructure

Deformation behavior and microstructure formation mechanism at the interface of Mg/Al composite plate during vibration assisted rolling process

Effect of Direct Rolling Process on Microstructure and Mechanical Properties of the Electron Beam Cold Hearth Melting Ti-6Al-4V Alloy

Effects of Degree of Deformation on the Microstructure, Mechanical Properties and Texture of Hybrid-Reinforced Titanium Matrix Composites

Microstructure and mechanical properties of Ti6Al4V based laminated composites at various rolling reductions

Microstructural evolution and surface integrity of ultrasonic surface rolling in Ti6Al4V alloy

Microstructure characteristics and enhanced properties of network-structured TiB/(TA15-Si) composites via rolling deformation at different temperatures

A Novel Method for Grain Refinement and Microstructure Modification in Tial Alloy by Ultrasonic Vibration

Effects of rolling deformation on microstructure orientations and tensile properties of TiB/(TA15-Si) composites

Effect of Rolling on the Microstructure and Mechanical Properties of (fecrni)94ti3al3 Medium Entropy Alloy Fabricated Via Selective Laser Melting

Effects of ultrasonic vibration on the microstructure and mechanical properties of high alloying TiAl

Revealing the Microstructure Evolution Mechanism and Mechanical Responses of a Novel Al–Zn–Mg–Cu Alloy by Hot Deformation Process

Effects of Rolling Deformation on Microstructure and Mechanical Properties of Network Structured TiBw/Ti Composites

Transverse texture weakening and anisotropy improvement of Ti-6Al-4V alloy sheet via asymmetric rolling and static recrystallization annealing

Influence of Asymmetric Rolling on the Microstructure, Texture Evolution and Mechanical Properties of Al–Mg–Si Alloy

Texture Evolution, Microstructure, and Superelastic Properties of Different Cold-Rolled Ti-Zr-Nb-Sn Strain Glass Alloys

Mechanical Properties and Microstructure of a Ti-6Al-4V Alloy Subjected to Cold Rolling, Asymmetric Rolling and Asymmetric Cryorolling

Study of microstructure and mechanical properties of quasi-continuous network structured (Ti3AlC2-Al3Ti)/2024Al composites based on hot rolling

Research on Effects of Rolling-Drawing Deformation on Performance of Cu-10Ni-1Fe-1Mn Alloy