Abstract:Laser sources are extensively used in surface engineering technology and in materials processing. Their high energy density, excellent directionality and monochromaticity makes them ideal for a wealth of potential uses that require the concentration of a significant amount of energy in a small area. From the electrochemical point of view, one of the most interesting applications for lasers is Laser Assisted Electrodeposition (LAE). Indeed, the high energy density transferred by a laser can locally change the electrochemical state of a surface by inducing photo-electrochemical or thermal-electrochemical effects, triggering thus metal reduction. In addition, it is also possible to pattern the deposited metal layer by scanning the surface of the substrate with the laser, usually with spatial resolution in the range of few micrometers. From the applicative point of view, LAE can be exploited for the selective deposition of metal layers for both decorative and functional uses. LAE can be intended in two ways: the laser can be used to enhance a standard electrolytic deposition process [1, 2], increasing deposition rates by focusing the radiation on the cathode, or it can be used to trigger electrodeposition on freestanding metal surfaces in total absence of any external polarization [1]. The latter approach is the most interesting due to the reduced complexity of the setup required and is made possible by the localized variation of the rest potential induced in the zone of the substrate hit by the light [1]. As a consequence of this variation, metallic ions can be reduced in correspondence of the illuminated zone. The occurrence of this phenomenon, which allows metal deposition without any external power source, has been demonstrated for Cu [1, 3], Ni [3] and Au [4]. Despite the work carried out by many research groups, still many aspects of LAE in absence of external polarization remain poorly understood. The aim of the present work is to investigate the possibility to perform LAE with some significant metal-substrate couples. The deposition mechanism is rationalized considering the specific electrochemical properties of the metals involved. In addition to this fundamental characterization, the work also aims at evaluating the industrial applicability of LAE. To this extent, patterned layers of precious metals are deposited on metallic substrates for decorative purposes. Finally, LAE is applied here for the first time to the deposition of alloys. [1] J. C. Puippe et al., J. Electrochem. Soc. 128(12), 2539-2545 (1981) [2] Z. Zhang et al., MDPI Materials 13, 3560 (2020) [3] R. J. von Gutfeid et al., IBM J. Res. Develop. 26(2), 136-144 (1982) [4] Khan et al., NASF Surface Technology White Papers 84(3), 6-13 (2019)

Experimental investigation of localized electrochemical deposition-based micro-additive manufacturing process

A study on the effect of inter-electrode gap and pulse voltage on current density in electrochemical additive manufacturing

Voxelated Meniscus-Confined Electrodeposition of 3D Metallic Microstructures

A novel method of effectively fabricating the micro-objects by selective jet electrodeposition (SJED)

Localized Electrochemical Deposition Using Copper Pyrophosphate-Based Electrolyte

Microscale Structure Additive Manufacturing Control Method Using Localized Electrochemical Deposition

A novel approach of thick coating through selective jet electrodeposition process

A mathematical model of the deposition rate and layer height during electrochemical additive manufacturing

MOEMS 3D microstructure preparation method based on novel localized electrochemical deposition

Electrochemical additive manufacturing of micro/nano functional metals

Electrohydrodynamic Redox 3D Printing: Confined Electroplating of Alloys for Additive Manufacturing at the Submicron Scale

Atomic-scale Understanding of Microstructural Evolution in Electrochemical Additive Manufacturing of Metallic Nickel

Direct in- and out-of-plane writing of metals on insulators by electron-beam-enabled, confined electrodeposition with submicrometer feature size

Emerging electrochemical additive manufacturing technology for advanced materials: Structures and applications

Characterization and Application of Materials Grown by Electron-Beam-Induced Deposition

A Novel Data-Driven Framework for Enhancing the Consistency of Deposition Contours and Mechanical Properties in Metal Additive Manufacturing

Laser Assisted Electrodeposition of Metals and Alloys

Simulation and Experimental Study on Metal Microstructure of Meniscus‐Confined Electrodeposition

Progress on research and technology of localized electrochemical deposition

Effect of Laser Energy Density on Bulk Properties of SS 316L Structures Built by Laser Additive Manufacturing Using Powder Bed Fusion

Investigation of Effect of Processing Parameters for Direct Energy Deposition Additive Manufacturing Technologies