Abstract:The metallic interconnects are essential components of energy devices such as fuel cells and electrolysis cells, batteries, as well as electronics and optoelectronic devices. In recent years, 3D printing processes have offered complementary routes to the conventional photolithography- and vacuum-based processes for interconnect fabrication. Among these methods, the confined electrodeposition (CED) process has enabled a great control over the microstructure of the printed metal, direct printing of high electrical conductivity (close to the bulk values) metals on flexible substrates without a need to sintering, printing alloys with controlled composition, printing functional metals for various applications including magnetic applications, and for in situ scanning electron microscope (SEM) nanomechanical experiments. However, the metal deposition rate (or the overall printing speed) of this process is reasonably slow because of the chemical nature of the process. Here, we propose using the CED process to print a single layer of a metallic trace as the seed layer for the subsequent selected-area electroless plating. By controlling the activation sites through printing by the CED process, we control, where the metal grows by electroless plating, and demonstrate the fabrication of complex thin-film patterns. Our results show that this combined process improves the processing time by more than 2 orders of magnitude compared to the layer-by-layer printing process by CED. Additionally, we obtained Cu and Ni films with an electrical resistivity as low as ∼1.3 and ∼2 times of the bulk Cu and Ni, respectively, without any thermal annealing. Furthermore, our quantitative experiments show that the obtained films exhibit mechanical properties close to the bulk metals with an excellent adhesion to the substrate. We demonstrate potential applications for radio frequency identification (RFID) tags, for complex printed circuit board patterns, and resistive sensors in a Petri dish for potential biological applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01890</a>.SEM images of the single-layer printed Cu and Ni lines with a nozzle diameter of ∼250 μm for different nozzle speeds; The optical images of single-layer Cu and Ni lines printed with different nozzle speeds, and the width and thickness of the printed Cu and Ni lines vs the nozzle speed; The FIB-sectioned cross-sectional images of Cu and Ni films; and The schematic of an unpinned (top) and pinned (bottom) indentation-induced buckle (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01890/suppl_file/am1c01890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Direct in- and out-of-plane writing of metals on insulators by electron-beam-enabled, confined electrodeposition with submicrometer feature size

Droplet-confined electroplating for nanoscale additive manufacturing: current control of the initial stages of the growth of copper nanowires

Microdeposition of 3D Structure on F Ilm Surface Using Micropipette

Localized Electrochemical Deposition Using Copper Pyrophosphate-Based Electrolyte

Characterization and Application of Materials Grown by Electron-Beam-Induced Deposition

Voxelated Meniscus-Confined Electrodeposition of 3D Metallic Microstructures

Meniscus-confined Electrodeposition of Metallic Microstructures with In-Process Monitoring of Surface Qualities

Optically-controlled Digital Electrodeposition of Thin-Film Metals for Fabrication of Nano-Devices

A Method for Micropipette-Based Meniscus-Confined Electrodeposition of Microstructures Without Nozzle Clogging

Microplasma Direct Writing of a Copper Thin Film in the Atmospheric Condition with a Novel Copper Powder Electrode

Meniscus-Confined Three-Dimensional Electrodeposition for Direct Writing of Wire Bonds

Laser-directed Deposition of Silver Nanostructures

Direct Electron Beam Writing of Silver-Based Nanostructures

Electrochemical Additive Manufacturing of Binary and Ternary Alloys at the Mircon Scale by Electrohydrodynamic Redox 3D Printing

Copper Electrodeposition from Ultrathin Layer of Electrolyte

Electrohydrodynamic Redox 3D Printing: Confined Electroplating of Alloys for Additive Manufacturing at the Submicron Scale

Electromigration-based deposition enabled by nanorobotic manipulation inside a transmission electron microscope

Nanoscale electrodeposition of metals and compound semiconductors from ionic liquids

Direct microfabrication of oxide patterns by local electrodeposition of precisely positioned electrolyte: the case of Cu2O

Ultra High Resolution, Low Temperature, Direct Metal Patterning by Selective Laser Processing of Solution Deposited Metal Nanoparticles

Interconnect Fabrication by Electroless Plating on 3D-Printed Electroplated Patterns