Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Although there are many studies related to design, modeling, and optimization of fused deposition modeling (FDM) process parameters in the literature, the absence of a systematic approach to increase the reliability of model selection and optimization results is an important shortcoming that must be addressed. To make up for this deficiency, a new strategy was proposed to obtain desired quality on mechanical properties by adjusting FDM process parameters. This attempt involves manufacturing, modeling, and optimization point of view. The D-optimal method was employed to form experiment set, including process parameters. A hybrid approach neuro regression combining artificial neural network (ANN) and regression analysis together was used for modeling of FDM process. The most significant advantage of the neuro-regression approach compared to ANN is that the mathematical models can be used directly without needing any transformation. This is not possible in neural networks and, therefore, significantly limits and complicates the use of models obtained using ANN. The present study aims at optimization of the FDM process parameters, including infill density, infill pattern, layer thickness, and print speed on ultimate strength, fracture strength, and fracture strain for polylactide (PLA). In this regard, modified versions of the optimization algorithms Differential Evolution, Nelder Mead, and Simulated Annealing were used to find the best or elite designs. Linear or nonlinear models consisting of polynomial, trigonometric, and logarithmic expressions and their hybrid forms were employed to define the strength and strain behavior of PLA. It is concluded that (a) implementations of the optimization algorithms provide a 19% improving the minimum strain value if it is compared with the experimental results, (b) infill pattern types (x2) were found as honeycomb, triangle, and cubic for the designs in terms of maximum fracture strength, minimum strain, and maximum ultimate tensile strength respectively, (c) many alternatives near optimum local designs could be obtained based on Nelder Mead algorithm for fracture strength and ultimate strength parameters. Thus, this allows work in a wide range of applications without depending on a single result for production.

A hybrid ANN/PSO optimization of material composition and process parameters for enhancement of mechanical characteristics of 3D-printed sample

Optimizing 3D printed diamond lattice structure and investigating the influence of process parameters on their mechanical integrity using nature-inspired machine learning algorithms

Optimization of FFF process parameters to improve the tensile strength and impact energy of polylactic acid/carbon nanotube composite

Mechanical Properties and Assessment of PLA Mixed with Carbon by Using Additive Manufacturing

Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing

4D printing and optimization of biocompatible poly lactic acid/poly methyl methacrylate blends for enhanced shape memory and mechanical properties

Experimental study and optimizing the FDM process using war strategy optimization technique to enhance mechanical properties and surface quality of the PLA thermoplastic

On the Mechanical Response of Silicon Dioxide Nanofiller Concentration on Fused Filament Fabrication 3D Printed Isotactic Polypropylene Nanocomposites

OPTIMIZATION OF ANNEALING AND 3D PRINTING PROCESS PARAMETERS OF PLA PARTS

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

Effect of printing characteristics for the incorporation of hexagonal-shaped lattice structure on the PLA polymeric material

Optimization of Process Parameters of Fused Filament Fabrication of Polylactic Acid Composites Reinforced by Aluminum Using Taguchi Approach

Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites

Experimental investigation and optimization of process parameters on tensile strength of carbon coated PLA material

Enhancing Polylactic Acid Properties with Graphene Nanoplatelets and Carbon Black Nanoparticles: A Study of the Electrical and Mechanical Characterization of 3D-Printed and Injection-Molded Samples

Multi-objective numerical optimization of 3D-printed polylactic acid bio-metamaterial based on topology, filling pattern, and infill density via fatigue lifetime and mass

On the optimized fused filament fabrication of polylactic acid using multiresponse central composite design and desirability function algorithm

Optimization of FDM 3D Printing Process Parameters for Improving Wear Characteristics of PLA-nGr Composite using Taguchi DOE

A new strategy for manufacturing, modeling, and optimization of 3D printed polylactide based on multiple nonlinear neuro regression analysis and stochastic optimization methods

Experimental analysis and optimization of mechanical properties of FDM-processed polylactic acid using Taguchi design of experiment

A Hierarchical Nano to Micro Scale Modelling of 3D Printed Nano-Reinforced Polylactic Acid: Micropolar Modelling and Molecular Dynamics Simulation