Abstract:Recently, the utilization of lithium has increased significantly, particularly in high-tech industries such as nuclear, aerospace, automotive, battery, military, glass and ceramic, and lubricants. However, lithium recovery methods from brines present certain drawbacks, making lithium exploitation a global challenge. A comparative analysis of lithium recovery methods from brine solutions indicates that the adsorption method holds promising potential for separating lithium from low-concentration solutions. Despite this, the quest for an effective and efficient adsorbent for lithium-ion adsorption remains a challenge, necessitating the development of an adsorbent, using readily available materials. In this study, carbon-active underwent chemical modification. Notably, the co-precipitation method was employed for the first time to create a composite adsorbent decorated with manganese dioxide (MnO 2 ). Various analyses, including XRD, SEM-EDS, FTIR, and BET, were conducted to elucidate the structural, morphological, physical, and chemical properties of the adsorbent. This synthesized adsorbent was applied to the adsorption of lithium from an aqueous sample. Exploration of adsorption parameters affecting capacity led to the identification of optimal conditions: 14-hour duration, an adsorbent dosage of 0.02 g, and an ambient temperature of 25°C, in a lithium solution with a concentration of 60.4 ppm. Under these conditions, the maximum adsorption capacity of the adsorbent was determined to be 30.5 mg/g. Based on experimental results, kinetic and adsorption isotherm models were investigated. The Pseudo-quadratic kinetic model, with an R 2 value of 0.999, emerged as the most suitable for describing the adsorbent's behavior. The Hill isotherm model with R2 = 0.9634 is the most appropriate isotherm model to describe the adsorbent behavior. Additionally, the selectivity of the adsorbent in the presence of other ions was investigated. The adsorbent's reusability was examined, and after two recycling periods, the adsorbent maintained an efficiency of up to 88%, demonstrating its stability. The CAC-MnO2-P composite adsorbent shows technical and economic promise for industrial use in lithium-ion recovery processes.

Chitosan grafted with crown ether with high selectivity and adsorption on lithium-ion

High specific surface crown ether modified chitosan nanofiber membrane by low-temperature phase separation for efficient selective adsorption of lithium

Crown Ether Grafted Graphene Oxide/Chitosan/Polyvinyl Alcohol Nanofiber Membrane for Highly Selective Adsorption and Separation of Lithium Ion

Selective biosorption of Li+ in aqueous solution by lithium ion-imprinted material on the surface of chitosan/attapulgite

Polyacrylonitrile/Crown Ether Composite Nanofibres With High Efficiency for Adsorbing Li(I): Experiments and Theoretical Calculations

Constructing Porous Hydrophilic HMO/CTA@PDA Composite Hydrogel for Super-High and Ultrafast Extraction of Lithium Ions

Synthesis of Spherical Composite CMC-LTO-EGDE-ME for Lithium Recovery from Geothermal Water

Novel Functionalized Cellulose Microspheres For Efficient Separation Of Lithium Ion And Its Isotopes: Synthesis And Adsorption Performance

Building Block Design of Thermally Regenerable Metal–organic Framework Composites for Highly Selective Lithium Adsorption

Convenient Synthesis of Granulated Li/Al-layered Double Hydroxides/chitosan Composite Adsorbents for Lithium Extraction from Simulated Brine with a High Mg2+/Li+ Ratio

Efficient Adsorption Performance of Lithium Ion Onto Cellulose Microspheres with Sulfonic Acid Groups

Synthesis of High Specific Surface Lithium-Ion Sieve Templated by Bacterial Cellulose for Selective Adsorption of Li+

Synthesis of High Specific Surface Lithium ion Sieve Templated by Bacterial Cellulose for Selective Adsorption of Li+

Electrospun nanofiber membrane of 14-crown-4 polyimide by in situ grafting diamino crown ether for highly selective Li + adsorption and separation

Highly selective separation of lithium with hierarchical porous lithium-ion sieve microsphere derived from MXene

Selective Ion Channel Adsorbents Facilitate Efficient and Low Environmental Impact Extraction of Liquid Lithium Resources

Granulation of Hydrometallurgically Synthesized Spinel Lithium Manganese Oxide Using Cross-Linked Chitosan for Lithium Adsorption from Water

Development of a Manganese Dioxide-Decorated Activated Carbon Nano-sorbent via Co-precipitation method for efficient lithium ion adsorption from aqueous solutions

Highly efficient and stable adsorption of lithium from brine with microcapsules containing 1-phenylazo-2-naphthol and trioctylphosphine oxide

Chitosan Oligosaccharide Derived Polar Host for Lithium Deposition in Lithium Metal Batteries

Electrospun nanofiber membrane of dibenzo 14-crown-4-ether polyimide for efficient selective lithium recovery from discarded lithium-ion batteries