Abstract:Galvanized advanced high strength steels (AHSS) will be the most competitive structural material for automotive applications in the next decade. Oxidation of AHSS during the recrystalization annealing process in a continuous galvanizing line to a large extent influences the quality of zinc coating on the final galvanized steel product. For example, formation of oxides of alloying elements (e.g. Mn, Cr, Si) at the steel surface during annealing prior to galvanizing leads to poor adhesion of a zinc coating. Yet, knowledge on the high temperature oxidation behaviour of AHSS is rather limited. The primary aim of this thesis is to provide fundamental understanding on the kinetics of internal oxidation of AHSS during annealing. The classical Wagner internal oxidation theory for binary alloys was extended to account for multi-component alloys. To this end, a generic coupled thermodynamic-kinetic internal oxidation model based on Fick’s 1st law was developed in order to predict the kinetics of internal oxidation, as well as the concentration depth profiles of internal oxides and solute elements in alloy matrix, considering the finite solubility product of oxide precipitates, the non-ideal behaviour of solid solution and the formation of multiple type of oxide species. The internal oxidation behaviour of Fe-Mn and Fe-Mn-Cr steel alloys were experimentally studied to validate the model. It has been found that for Fe-Mn and Fe-Mn-Cr steel alloys, the effect of non-ideal behaviour of solution on internal oxidation is negligible, and local thermodynamic equilibrium is established within internal oxidation zone. Besides, the kinetics of Wustite formation on pure iron and Mn alloyed steels annealed in CO2 + CO or H2O + H2 gas mixtures as well as the reduction kinetics of the Wustite scale in Ar + H2 gas mixtures were investigated. The growth of Wustite scale on iron and Mn alloyed steels follows the linear rate law. However, adding Mn to iron, even at a relatively low concentration (say 1.7 wt%), dramatically lowers the growth rate of Wustite scale. Nevertheless, reduction kinetics of the Wustite scale on iron and Mn alloyed steels are almost the same. During the reduction process a dense iron layer is formed which separates the remaining Wustite scale from the reduction atmosphere. The rate of Wustite reduction by H2 is controlled by the diffusion of solute oxygen dissolved in the formed iron layer.

A chemo-thermo-mechanically constitutive theory of high-temperature interfacial oxidation in alloys under deformation

Investigation of Non-Uniform Oxidation Based on a Mechanochemical Phase Field Model with Nonlinear Reaction Kinetics and Large Inelastic Deformation

Coupled Modeling of Thermal-Fluid-solid and Chemo-Mechanical Behaviors in Thermal Barrier Coatings under Flowing Gas Environment

Electronic-scale assessment of high-temperature oxidation mechanisms in a novel Fe-based alloy

Thermal Oxidation of Ti-6Al–4V Alloy and Pure Titanium under External Bending Strain: Experiment and Modelling

A Phase-Field Study on Internal to External Oxidation Transition in High-Temperature Structural Alloys

A Multiscale Approach for Coupled Phenomena in Fcc Materials at High Temperatures

A Coupled Mechanical-Chemical Model For Reflecting The Influence Of Stress On Oxidation Reactions In Thermal Barrier Coating

A Coupled Diffusion-Viscoplastic Formulation for Oxidasing Multiphase Materials

Chemomechanical Finite Element Analysis for Surface Oxidation of Aluminum Alloy

Effects of breakaway oxidation on local stresses in thermal barrier coatings

Stress Influence on High Temperature Oxide Scale Growth: Modeling and Investigation on a Thermal Barrier Coating System

Creep Effect on Chemo-Mechanical Coupling Oxidation of Thermal Barrier Coatings

Modelling and Analysis of the Oxide Growth Coupling Behaviour of Thermal Barrier Coatings

Micromechanically informed reaction-induced damage and fracture in polymers due to oxidation

A Study of Deformation and Strain Induced in Bulk by the Oxide Layers Formation on a Fe-Cr-Al Alloy in High-Temperature Liquid Pb-Bi Eutectic

Thermodynamic and Kinetic Modelling of a Bond Coat Alloy: Oxidation Induced Depletion and Its Effect on Microstructure and Material Behavior

Oxidation Simulation of Thermal Barrier Coatings with Actual Microstructures Considering Strength Difference Property and Creep-Plastic Behavior

Thermodynamic, Kinetic and Mechanical Modeling to Evaluate CO2-induced Corrosion via Oxidation and Carburization in Fe, Ni alloys

Oxidation phenomena in advanced high strength steels : Modelling and experiment

Review of progress in calculation and simulation of high-temperature oxidation