Abstract:Due to moisture in the ore, auxiliary material, and ladle refractory material, the hydrogen element is easily enriched in molten steel. In the metallurgy process, some hydrogen atoms form bubbles and are removed by gravity, whearas others solidify in the strand and remain in the produced steel. When the hydrogen content reaches a certain critical value, the enriched hydrogen atoms congregate to produce a white spot, which greatly reduces the strength and toughness of the steel product, and leads to brittle fracture during its service period. At present, the RH (Ruhrstahl–Heraeus) and VD (vacuum degasser) refining processes are commonly applied in steel plants, which can reduce the hydrogen content to less than 2×10−6. With the demand for high quality steel, the hydrogen content must be further decreased, so hydrogen diffusion in solid steel during the annealing process is gradually attracting increasing attention. In this study, a two-dimensional model was built to investigate the characteristic of dehydrogenation in the bloom annealing process of rail steel. Moreover, the effect of annealing temperature and annealing time on hydrogen diffusion were analyzed, and the annealing parameters were optimized. During the dehydrogenation annealing process, the hydrogen content at the corners and edges of the bloom are found to decrease rapidly, while that in the center of the strand begin to decrease in the later heating stage. As the annealing temperature increases, the starting point of dehydrogenation in the bloom center moves ahead and the maximum dehydrogenation rate increases significantly. With the extension of the soaking period, the central hydrogen content of bloom decreases significantly, but the increase rate of the dehydrogenation gradually decreases. By optimizing the bloom annealing parameters, the hydrogen content in the bloom can be steadily reduced to 0.6×10−6, which fully meets the requirement of high quality steel production.

Development of softening and melting testing conditions simulating blast furnace operation with hydrogen injection

Changes in Microscale Liquid Formation in Lump and Sinter Mixed Burden Softening and Melting Tests with the Addition of Hydrogen

Numerical Simulation of Dehydrogenation Annealing in Bloom

Numerical Investigation of Burden Distribution in Hydrogen Blast Furnace

Numerical Simulation Study of Co-injection of Pulverized Coal and Hydrogen in the Tuyere-Raceway

Softening and melting behaviors of ferrous burden in hydrogen-rich blast furnace cohesive zone

Heat distribution model under hydrogen-rich low-carbon conditions in blast furnace

CFD Study of Hydrogen Injection in Blast Furnaces: Tuyere Co-injection of Hydrogen and Coal

Numerical Study of Hydrogen-Rich Fuel Coherent Jet in Blast Furnace Tuyere

Computational Study of Hot Gas Injection (HGI) into an Ironmaking Blast Furnace (BF)

Influence of Large Amount of Hydrogen Containing Gaseous Reductant Injection on Carbon Consumption and Operation Conditions of Blast Furnace - Development of Low Carbon Blast Furnace Operation Technology by using Experimental Blast Furnace: part II -

Development of simple blast furnace models for addressing carbon reduction strategies

Effects of Surrounding Hydrogen Injection Parameters on Coherent Jet Characteristics in Electric Arc Furnace Steelmaking Process

Co-injection of hydrogen and biochar (CoHB) in a simulated blast furnace: A univariate and multivariate study

A Numerical Study of Scenarios for the Substitution of Pulverized Coal Injection by Blast Furnace Gas Enriched by Hydrogen and Oxygen Aiming at a Reduction in CO2 Emissions in the Blast Furnace Process

Effect of Mixed Charging of Nut Coke and Sinter on Hydrogen-Rich Smelting Process of Blast Furnace

Evaluation of Some Uncertainties in the Modeling of Blast Furnace Hydrogen Injection

Operation enhancement of the H 2 shaft furnace: a numerical study on the impact of N 2 mixing in feed gas

Mathematical simulation and experimental study on coke oven gas injection aimed to low carbon blast furnace ironmaking

Evolution and process analysis of the hearth activity in hydrogen-rich blast furnace

Effect of H2 on Blast Furnace Ironmaking: A Review