Controlling the elasticity of polyacrylonitrile fibers via ionic liquids containing cyano-based anions

Zongyu Wang,Huimin Luo,Halie J. Martin,Tao Wang,Yifan Sun,Mark A. Arnould,Bishnu P. Thapaliya,Sheng Dai

DOI: https://doi.org/10.1039/d2ra00858k

IF: 4.036

2022-01-01

RSC Advances

Abstract:Highly stretchable PAN/ILs fibers were fabricated through melt-spinning with ionic liquids containing cyano-based anions.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Effect of the Ionic Liquid Structure on the Melt Processability of Polyacrylonitrile Fibers.

Halie J. Martin,Huimin Luo,Hao Chen,Chi-Linh Do-Thanh,Logan T. Kearney,Richard Mayes,Amit K. Naskar,Sheng Dai

DOI: https://doi.org/10.1021/acsami.9b19704

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:The production of high-strength carbon fibers is an energy-intensive process, where a significant cost involves the wet or dry-spinning of polyacrylonitrile (PAN) fiber precursors. Melt-spinning PAN fibers would allow for significant reduction in the production cost and production hazards. Ionic liquids (ILs) are an attractive fiber-processing medium because of their negligible vapor pressure and low toxicity. In addition, they are carbon-forming precursors; upon carbonization, residual ILs can enhance the carbon yield, although primarily useful for plasticized melt-spinning of PAN precursor fibers. In this research, we investigated the influence of the molecular structure of ILs and the control of plasticizing interactions with PAN during melt-spinning. The structural, thermal, and mechanical properties of the melt-spun PAN fibers were obtained by a combination of various characterization methods, such as differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, and mechanical testing. These results demonstrated that the IL structure and counteranions influence the PAN fiber formation. More specifically, ILs containing bromide counteranions produced PAN precursor fibers with increased mechanical properties compared to ILs containing chloride anions. Our research can provide a foundation to understand the influence of ILs on melt-spinning of PAN fibers and provides us the guidelines for a higher cost-/energy-efficient production of PAN-based carbon fibers.
Electrospinning of Polyacrylonitrile Fibers from Ionic Liquid Solution

Tang Yang,Yongyi Yao,Yi Lin,Bing Wang,Ruili Xiang,Yurong Wu,Dacheng Wu

DOI: https://doi.org/10.1007/s00339-009-5483-9

2009-01-01

Abstract:We developed a temperature-controlled electrospinning apparatus specially for the polymers/IL system with high viscosity and surface tension and investigated the electrospinning of polyacrylonitrile (PAN)/1-butyl-3-methyl-imidazolium bromide ([BMIM][Br]) solutions. The rheological behaviors, surface tensions and conductivities of PAN/[BMIM]/[Br] solutions at different temperatures indicated that appropriately increasing the temperature is beneficial to their spinnability. It is also shown that PAN/[BMIM]/[Br] with a concentration of 3 wt%, 4 wt% and 5 wt% can be electrospun to fibers by increasing their temperatures to 70°C, 75°C or 85°C, respectively. A rotating drum composed of a dacron mesh was used as a collector in order to avoid the contraction of the wet fibers. This present study provides an alternative method for electrospinning polymer fibers.
Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase.

Sheng Liu,Jinqing Wang,Junfei Ou,Jinfang Zhou,Yunfa Chen,Shengrong Yang

DOI: https://doi.org/10.1166/jnn.2010.1883

2010-01-01

Journal of Nanoscience and Nanotechnology

Abstract:At the room temperature, a novel and environmental friendly approach for synthesizing polyaniline (PANI) nanofibers on a large scale is presented firstly in the aqueous phase by ultraviolet (UV)-assisted polymerization using cetyltrimethylammonium bromide (CTAB) as the "soft-template." It is obvious that the polymerization process can be accelerated under the illumination of UV light and the preliminary mechanism has been pointed out. Furthermore, it also can be noted that the lower concentrations of CTAB and HCl are helpful for the fabrication of smooth and uniform PANI nanofibers. As observed with FE-SEM and TEM, the as-synthesized PANI nanostructures under the appropriate conditions are composed of uniform nanofibers with the average diameter of about 100 nm and the length of several micrometers. Subsequently, the synthesized PANI nanostructures are characterized with UV-vis, FTIR, XRD spectra, and the typical physical and chemical properties of PANI are displayed. In addition, the conductivity of the synthesized PANI nanofibers was also measured with the four probe method and the excellent conductivity was presented. In summary, the procedure presented here only involving exposure of an acidic aqueous solution of aniline to UV light illumination is so simple and the needed equipment is so low cost, from the viewpoint of technological applications, that the large-scale UV-assisted polymerization of PANI nanofibers from the monomer solution is feasible and promising.
Pultrusion Spinning of Elastic Ionogel Fibers

Ying-kun Shi,Dong Wang,Pei-yi Wu,Sheng-tong Sun

DOI: https://doi.org/10.11777/j.issn1000-3304.2023.23266

2024-01-01

Acta Polymerica Sinica

Abstract:Stretchable ionically conductive fibers hold great promise in the fields of flexible electronic devices, smart textiles, and human-machine interfaces. However, the scalable production of stretchable fibers with both high conductivity and elasticity remains a significant challenge. In recent years, pultrusion spinning has emerged as a promising technique for the continuous fabrication of ultrathin gel fibers at ambient conditions. Nevertheless, the reduction in fiber diameter often comes at the cost of significantly increased resistance, hampering their applications in smart sensing. To overcome this limitation, in this study, we introduce a one-step pultrusion spinning approach for the continuous production of highly elastic ionogel fibers. Our ionogel fiber is derived from a spinning dope containing poly(2-(dimethylamino)ethylacrylate) methyl chloride quarternary salt (PDMAEA-Q), poly(methacrylic acid) (PMAA), and an ionic liquid, 1-ethyl-3-methylimidazolium ethyl sulfate (EMI ES). Upon water evaporation, PMAA chains undergo nanoconfinement through hydrogen bonding, forming numerous clusters dispersed within the ductile PDMAEA-Q matrix. Moreover, the employed ionic liquid, EMI ES, interacts with polymer matrix through various physical interactions, further modulating the mechanical and electric properties of the resulting fiber. Owing to its hierarchical phase-separated structure formed by spontaneous nanoconfinement, the ionogel fiber exhibits exceptional stretchability (707% elongation), remarkable transparency (98%), high elasticity (similar to 9% residual strain), high ionic conductivity (0.12 S center dot m(-1)), and anti-freezing properties. Furthermore, the ionogel fiber is sensitive to humidity, temperature, and strain changes, enabling its high-resolution detection of different stimuli via electrical signals. This work paves the way for the design of advanced ionically conductive fibers, unlocking a myriad of possibilities in smart sensing applications. [GRAPHICS] .
Tentative Confinement of Ionic Liquids in Nylon 6 Fibers: A Bridge between Structural Developments and High-Performance Properties

Ahmed Dawelbeit,Muhuo Yu

DOI: https://doi.org/10.1021/acsomega.0c04740

IF: 4.1

2021-01-27

ACS Omega

Abstract:A reversible confinement of ionic liquid (IL) among the amide segments has been carried out for the preparation of high-modulus and high-strength aliphatic semicrystalline nylon 6 fibers. In this research work, the suppression or the weakening of the hydrogen bonds during the conventional low-speed melt spinning process is followed by a hot-drawing stage and a subsequent IL extraction of the IL out of the 2% wt IL-confined fibers and an immediate thermal stabilization process for the improvement of the properties of the pristine nylon 6 fibers. The resulted crystal structural developments of the IL-confined fibers are attributed to ultimate molecular orientations, which have contributed to the developments of the overall fiber properties. Here, the influences of the IL on the γ and the α crystal phases, the γ-α transition, the morphological properties, and the tensile properties are investigated. The FTIR reported, experimentally, additional peaks at 1237 cm–1 for the γ crystal phase and at 1417 and 1476 cm–1 for the α crystal phase, in conformity with the theoretical computations. The XRD demonstrated that the conventional low-speed melt spinning can successfully be used to prepare as-spun IL-confined fibers having highly improved properties. The so prepared as-spun IL-confined fibers are found to have a γ phase structure that has a small crystal size and high crystal perfections. Fortunately, the γ-to-α crystal phase transition for the IL-confined nylon 6 fibers can be acquired during the hot-drawing stage (stress-induced phase transformation). Furthermore, the IL extraction process followed by a thermal stabilization process, interestingly, has led to significant increases in both of the tensile strengths and the tensile moduli of the reverted nylon 6 fibers. The values that are found are 8.46 cN/dtex for the tensile strength and 39.09 cN/dtex for the tensile modulus. The structure–property relationships between the IL-confined and the reverted nylon 6 fibers have also been discussed.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Non-Coagulant Spinning of High-Strength Fibers from Homоpolymer Polyacrylonitrile Synthesized via Anionic Polymerisation

Ivan Yu. Skvortsov,Mikhail S. Kuzin,Pavel S. Gerasimenko,Maria V. Mironova,Yaroslav V. Golubev,Valery G. Kulichikhin

DOI: https://doi.org/10.3390/polym16091185

IF: 5

2024-04-24

Polymers

Abstract:The rheological properties, spinnability, and thermal–oxidative stabilization of high-molecular-weight linear polyacrylonitrile (PAN) homopolymers (molecular weights Mη = 90–500 kg/mol), synthesized via a novel metal-free anionic polymerization method, were investigated to reduce coagulant use, enable solvent recycling, and increase the carbon yield of the resulting carbon fibers. This approach enabled the application of the mechanotropic (non-coagulating) spinning method for homopolymer PAN solutions in a wide range of molecular weights and demonstrated the possibility of achieving a high degree of fiber orientation and reasonable mechanical properties. Rheological analysis revealed a significant increase in solution elasticity (G′) with increasing molecular weight, facilitating the choice of optimal deformation rates for effective chain stretching prior to strain-induced phase separation during the eco-friendly spinning of concentrated solutions without using coagulation baths. The possibility of collecting ~80 wt% of the solvent at the first stage of spinning from the as-spun fibers was shown. Transparent, defect-free fibers with a tensile strength of up to 800 MPa and elongation at break of about 20% were spun. Thermal treatment up to 1500 °C yielded carbon fibers with a carbon residue of ~50 wt%, in contrast to ~35 wt% for industrial radically polymerized PAN carbonized under the same conditions.

polymer science
Plastic deformation of the microfibrils in wet polyacrylonitrile fibers induced by the stretching field

Quan Gao,Xu Wang,Zhihan Wang,Yongfa Zhou,Jiang Ren

DOI: https://doi.org/10.1002/app.55848

IF: 3

2024-06-09

Journal of Applied Polymer Science

Abstract:Morphological changs during wet‐fiber stretching process. The plastic deformation of the microfibrils governs the formation and development of orientation, crystallization, and structural defects in polyacrylonitrile (PAN) fibers due to the flow‐fiber coupling effect during stretching process. In this study, we investigated the morphological changes of microfibrils in PAN fibers during wet‐fiber stretching using ultrathin section technology and electron microscopy observation. Their plastic deformation mechanism was also revealed. An interconnected network was formed and separated by the pore/voids during coagulation process. Stretching forces facilitated the plastic deformation of microfibrils, resulted in their elongation and orientation. Moreover, the inter‐fibril distance reduced and pore/void shape and dimensions were changed. The distinct response of microfibril elements under stretching force resulted in skin‐core structures within the fiber. Tensile strength increased from 27 to 382 MPa, while elongation at break decreased from 225% to 28%. Aligned microfibrils exhibited high tensile strength, whereas unoriented microfibrillar networks showed relatively high elongation properties. Additionally, we proposed a relationship between microfibril morphology changes and fiber mechanical properties.

polymer science
Controlled Structural Relaxation of Aramid Nanofibers for Superstretchable Polymer Fibers with High Toughness and Heat Resistance

He Ji,Shouhua Feng,Ming Yang

DOI: https://doi.org/10.1021/acsnano.4c04388

IF: 17.1

2024-07-16

ACS Nano

Abstract:Polymer fibers that combine high toughness and heat resistance are hard to achieve, which, however, hold tremendous promise in demanding applications such as aerospace and military. This prohibitive design task exists due to the opposing property dependencies on chain dynamics because traditional heat-resistant materials with rigid molecular structures typically lack the mechanism of energy dissipation. Aramid nanofibers have received great attention as high-performance nanoscale building units due to their intriguing mechanical and thermal properties, but their distinct structural features are yet to be fully captured. We show that aramid nanofibers form nanoscale crimps during the removal of water, which primarily resides at the defect planes of pleated sheets, where the folding can occur. The precise control of such a structural relaxation can be realized by exerting axial loadings on hydrogel fibers, which allows the emergence of aramid fibers with varying angles of crimps. These crimped fibers integrate high toughness with heat resistance, thanks to the extensible nature of nanoscale crimps with rigid molecular structures of poly(p-phenylene terephthalamide), promising as a template for stable stretchable electronics. The tensile strength/modulus (392-944 MPa/11-29 GPa), stretchability (25-163%), and toughness (154-445 MJ/cm3) are achieved according to the degree of crimping. Intriguingly, a toughness of around 430 MJ/m3 can be maintained after calcination below the relaxation temperature (259 °C) for 50 h. Even after calcination at 300 °C for 10 h, a toughness of 310 MJ/m3 is kept, outperforming existing polymer materials. Our multiscale design strategy based on water-bearing aramid nanofibers provides a potent pathway for tackling the challenge for achieving conflicting property combinations.
Hydrogel-assisted microfluidic spinning of stretchable fibers via fluidic and interfacial self-adaptations

Guoxu Zhao,Tinglong Wu,Ruhai Wang,Zhong Li,Qingzhen Yang,Lei Wang,Hongwei Zhou,Birui Jin,Hao Liu,Yunsheng Fang,Dong Wang,Feng Xu

DOI: https://doi.org/10.1126/sciadv.adj5407

IF: 13.6

2023-10-21

Science Advances

Abstract:Stretchable polymeric fibers have enormous potential, but their production requires rigorous environmental controls and considerable resource consumption. It's also challenging for elastic polymers with high performance but poor spinnability, such as silicones like polydimethylsiloxane and Ecoflex. We present a hydrogel-assisted microfluidic spinning (HAMS) method to address these challenges by encapsulating their prepolymers within arbitrarily long, protective, and sacrificable hydrogel fibers. By designing simple apparatuses and manipulating the fluidic and interfacial self-adaptations of oil/water flows, we successfully produce fibers with widely controllable diameter (0.04 to 3.70 millimeters), notable length, high quality (e.g., smooth surface, whole-length uniformity, and rounded section), and remarkable stretchability (up to 1300%) regardless of spinnability. Uniquely, this method allows an easy, effective, and controllable reshaping production of helical fibers with exceptional stretchability and mechanical compliance. We deeply reveal the mechanisms in producing these fibers and demonstrate their potential as textile components, optoelectronic devices, and actuators. The HAMS method would be a powerful tool for mass-producing high-quality stretchable fibers.

multidisciplinary sciences
Flexible Conductive Fibers from Alginate, Cellulose Nanocrystals, and Polyaniline by Wet Spinning

Ziyi Xu,Ji Zhou,Dan Li,Ge Zhu,Ning Lin

DOI: https://doi.org/10.1021/acssuschemeng.3c02807

IF: 8.4

2023-07-13

ACS Sustainable Chemistry & Engineering

Abstract:Polyaniline (PANI) has indeed received significant attention and extensive research in both academic and electronic industrial fields. Its unique properties, such as conductivity and processability, make it a promising material for various applications. Researchers and industrialists have explored PANI for its potential use in electronic devices, such as sensors, batteries, capacitors, and actuators, as well as in other areas like corrosion protection, supercapacitors, and electromagnetic shielding. The poor compatibility, tendency to aggregate, and poor mechanical properties of nanostructured PANI have hindered its performance. Cellulose nanocrystals (CNCs) were used as a bio-template for covalent grafting PANI onto hydrophilic CNCs (CNC-g-PANI) through in situ oxidative polymerization. The resulting CNC-g-PANI suspension with the sodium alginate (SA) matrix was wet-spun into composite fibers, which were compared to composite fibers made by physical blending of pure PANI and hydrogen-bonded CNC/PANI. The parameters were characterized to investigate the performance of the composite fibers. The covalent grafted CNC-g-PANI suspension maintained stable dispersion throughout the wet spinning process, making it suitable for both fundamental research and industrial processing. Indeed, the development of CNC-g-PANI@SA composite fibers through the covalent grafting of PANI onto cellulose nanocrystals offers a simple and eco-friendly approach. These composite fibers exhibit improved properties, including enhanced tensile strength, electrical conductivity, flexibility, and fatigue resistance. These attributes make them highly suitable for applications in the antistatic textile and electronic industries.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
New Insights into Orientation Differences Between Skin and Core Regions of Polyacrylonitrile Fibers During Pre-Stabilization with the Stretching Process

Liang Chen,Jie Liu,Jing Chen,Xiang Li,Zehua Zhao,Xiaoxu Wang

DOI: https://doi.org/10.1016/j.polymer.2020.123043

IF: 4.6

2020-01-01

Polymer

Abstract:In the study, a model to systematically evaluate the differences between the orientation of polyacrylonitrile (PAN) chains both in skin and core regions during pre-stabilization with the stretching process is proposed. Consequently, there are few influences on changes in the orientation of PAN chains in core regions. By contrast, when the stretching ratios is under 1.05, the chains in skin regions mainly undergo orientation, facilitating the simultaneous progress of the crystallization and cyclization reaction. However, at the stretching ratio range from 1.05 to 1.20, there may be other types of deformations, which results in a gradual increase of the crystallinity and remarkable depression of the stabilization reactions. As the stretching ratios greater than 1.20, the crystallinity and the orientation degrees drop due to overly imposed stress. The mechanical properties of stabilized PAN fibers strongly depend on the orientation degree in quasicrystals of PAN chains in skin regions.
Nanostructured Electrospun Hybrid Graphene/Polyacrylonitrile Yarns

Fahimeh Mehrpouya,Javad Foroughi,Sina Naficy,Joselito M. Razal,Minoo Naebe,Joselito Razal

DOI: https://doi.org/10.3390/nano7100293

IF: 5.3

2017-09-25

Nanomaterials

Abstract:Novel nanostructured hybrid electrospun polyacrylonitrile (PAN) yarns with different graphene ratios were prepared using liquid crystal graphene oxide (LCGO) and PAN. It was found that the well-dispersed LCGO were oriented along the fiber axis in an electrified thin liquid jet during electrospinning. The graphene oxide sheets were well dispersed in the polar organic solvent, forming nematic liquid crystals upon increasing concentration. Twisted nanofibers were produced from aligned nanofibrous mats prepared by conventional electrospinning. It was found that the mechanical properties of the twisted nanofiber yarns increased even at very low LCGO loading. This research offers a new approach for the fabrication of continuous, strong, and uniform twisted nanofibers which could show promise in developing a novel carbon fiber precursor.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Electromagnetic Functionalized Ultrafine Polymer/γ-Fe2o3 Fibers Prepared by Magnetic-Mechanical Spinning and Their Application As Strain Sensors with Ultrahigh Stretchability

Gui-Feng Yu,Jin-Tao Li,Wei Pan,Xiao-Xiao He,Ya-Jie Zhang,Mao-Gang Gong,Miao Yu,Zhi-Ming Zhang,Yun-Ze Long

DOI: https://doi.org/10.1016/j.compscitech.2016.12.005

IF: 9.1

2017-01-01

Composites Science and Technology

Abstract:A novel magnetic-mechanical spinning method was used to fabricate ultrafine parallel polyaniline/polyvinylidene fluoride/gamma-Fe2O3 (PANI/PVDF/gamma-Fe2O3) fibers. The magnetic field is generated by a permanent magnet which plays a decisive role in the spinning process. Moreover, the resultant fiber is continuous and the length of the fiber can be tens of meters. Additionally, the fibers are well aligned and the alignment can be maintained. The composite fibers show an electrical conductivity of 6.4 X 10-4 S cm(-1) and good superparamagnetism at room temperature. In particular, the strain sensor based on the twisted fibers shows an ultrahigh stretchability up to 440%, and a quick and repeatable response to finger pressure. The electromagnetic functionalized composite fibers may be used in stretchable devices, sensors, or electromagnetic interference shielding. (C) 2016 Elsevier Ltd. All rights reserved.
Wet‐spun porous fibers from high internal phase emulsions: Continuous preparation and high stretchability

Bing Jiang,Tao Zhang,Zhiguang Xu,Yan Zhao

DOI: https://doi.org/10.1002/pol.20210141

IF: 3.046

2021-04-16

Journal of Polymer Science

Abstract:Although high internal phase emulsion (HIPE)-templating is promising to prepare macroporous materials (polyHIPEs) with controllable shapes and tuneable property, fibrous polyHIPEs with stretchability and their continuous preparation are still challenging. Here, we report the fabrication of polyHIPE fibers in a continuous manner through wet spinning of HIPEs. The successful fabrication of polyHIPE fibers depends on HIPE dispersed phase fractions, ammonia-catalyzed interfacial reaction and wet spinning. Dry polyHIPE fibers exhibit tunable diameters, hierarchically porous structures, high stability to temperature and to various solutions, and high stretchability (with a high tensile strain of 155%), which is hard to achieve for polyHIPEs. The polyHIPE fibers show enhanced uptakes to both water (14.4 ml g−1) and organic solvents (up to 26.3 ml g−1), and the amphiphilic swelling is rare for polyHIPEs. Moreover, the dry polyHIPE fibers show good thermal insulation, similar to that of cotton. Simple wet spinning, combining with HIPEs with tuneable composition, is promising for preparing various polyHIPE fibers for various potential applications.

polymer science
Fabrication of shape-controllable polyaniline micro/nanostructures on organic polymer surfaces: obtaining spherical particles, wires, and ribbons.

Wenbin Zhong,Yongxin Wang,Yan Yan,Yufeng Sun,Jianping Deng,Wantai Yang

DOI: https://doi.org/10.1021/jp0678296

2007-01-01

Abstract:A novel strategy was developed in order to prepare various micro/nanostructured polyanilines (PANI) on polymer substrates. The strategy involved two main steps, i.e., a grafting polymerization of acrylate acid (AA) onto the surface of a polypropylene (PP) film and subsequently an oxidative polymerization of aniline on the grafted surface. By tuning the conformation of the surface-grafted poly acrylate acid (PAA) brushes, as well as the ratio of AA to aniline, the shape of the PANIs fixated onto the surfaces of the polymer substrate could be controlled to go from spherical particles to nanowires and eventually to nanoribbons. In these structures, the PAA brushes not only acted as templates but also as dopants of PANI, and thereby, the nanostructured PANIs could be strongly bonded with the substrate. In addition, the surface of the PP films grafted with polyaniline nanowires and nanoribbons displayed superhydrophobicity with contact angles for water of approxiamtely 145 and 151 degrees, respectively.
High-performance cellulosic filament fibers prepared via dry-jet wet spinning from ionic liquids

Marc P. Vocht,Ronald Beyer,Patricija Thomasic,Alexandra Müller,Antje Ota,Frank Hermanutz,Michael R. Buchmeiser

DOI: https://doi.org/10.1007/s10570-021-03697-x

IF: 6.123

2021-02-01

Cellulose

Abstract:Abstract We report on a new process for the spinning of high-performance cellulosic fibers. For the first time, cellulose has been dissolved in the ionic liquid (IL) 1-ethyl-3-methylimidazolium octanoate ([C2C1im][Oc]) via a thin film evaporator in a continuous process. Compared to other ILs, [C2C1im][Oc] shows no signs of hydrolysis with water. For dope preparation the degree of polymerization of the pulp was adjusted by electron beam irradiation and determined by viscosimetry. In addition, the quality of the pulp was evaluated by means of alkali resistance. Endless filament fibers have been spun using dry-jet wet spinning and an extruder instead of a spinning pump, which significantly increases productivity. By this approach, more than 1000 m of continuous multifilament fibers have been spun. The novel approach allows for preparing cellulose fibers with high Young's modulus (33 GPa) and unprecedented high tensile strengths up to 45 cN/tex. The high performance of the obtained fibers provides a promising outlook for their application as replacement material for rayon-based tire cord fibers.

materials science, textiles,polymer science, paper & wood
Morphologies and Crystal Structures of Styrene–acrylonitrile/isotactic Polypropylene Ultrafine Fibers Fabricated by Melt Electrospinning

Li Cao,Mu Dong,Anyang Zhang,Yong Liu,Weimin Yang,Zhiqiang Su,Xiaonong Chen

DOI: https://doi.org/10.1002/pen.23515

2013-01-01

Abstract:Ultrafine fibers or fiber web is an attractive material for its high aspect ratio or porous structure which is welcomed in various applications. In this study, ultrafine fibers (5–10 μm) of styrene–acrylonitrile (SAN) copolymer/isotactic polypropylene (iPP) blends were produced by melt electrospinning, SAN acted as a polymeric nucleating agent (PNA) in iPP fibers. Wide‐angle X‐ray diffraction, differential scanning calorimetry, scanning electron microscopy, and polarized optical microscopy were used to investigate the morphologies and the crystal structures of SAN/iPP electrospun fibers. The results showed that SAN/iPP melt formed microfibers with different morphologies and crystallinities through electrostatic stretching. The morphological distribution of SAN in iPP fibers depended on the SAN content, and the distribution influenced its nucleating activity and the final crystal structure of SAN/iPP electrospun fibers. After annealing treatment, the molecular chains of iPP in the confined SAN/iPP microfibers disorientated and rearranged, leading to the formation of a mixture of α‐ and γ‐crystal forms. The relative amount of the γ‐crystal form depended on PNA's concentration, annealing temperature and annealing time. Melt electrospun iPP fibers prepared in this study were collected as fiber webs that can be used for protective clothing material, filtration media, reinforcement for composites, and so on. POLYM. ENG. SCI., 53:2674–2682, 2013. © 2013 Society of Plastics Engineers
Patterned, highly stretchable and conductive nanofibrous PANI/PVDF strain sensors based on electrospinning and in situ polymerization.

Gui-Feng Yu,Xu Yan,Miao Yu,Meng-Yang Jia,Wei Pan,Xiao-Xiao He,Wen-Peng Han,Zhi-Ming Zhang,Liang-Min Yu,Yun-Ze Long

DOI: https://doi.org/10.1039/c5nr08618c

IF: 6.7

2016-01-01

Nanoscale

Abstract:A facile fabrication strategy via electrospinning and followed by in situ polymerization to fabricate a patterned, highly stretchable, and conductive polyaniline/poly(vinylidene fluoride) (PANI/PVDF) nanofibrous membrane is reported. Owing to the patterned structure, the nanofibrous PANI/PVDF strain sensor can detect a strain up to 110%, for comparison, which is 2.6 times higher than the common nonwoven PANI/PVDF mat and much larger than the previously reported values (usually less than 15%). Meanwhile, the conductivity of the patterned strain sensor shows a linear response to the applied strain in a wide range from 0% to about 85%. Additionally, the patterned PANI/PVDF strain sensor can completely recover to its original electrical and mechanical values within a strain range of more than 22%, and exhibits good durability over 10 000 folding-unfolding tests. Furthermore, the strain sensor also can be used to detect finger motion. The results demonstrate promising application of the patterned nanofibrous membrane in flexible electronic fields.
Enhanced stretchability and robustness towards flexible ionotronics via double-network structure and ion-dipole interactions

Wenlian Qiu,Guoqing Chen,He Zhu,Qi Zhang,Shiping Zhu

DOI: https://doi.org/10.1016/j.cej.2022.134752

IF: 15.1

2022-04-01

Chemical Engineering Journal

Abstract:Ionic conductive gels enabled by ionic liquids (ionogels) are promising candidates for flexible electronics due to less concerns on liquid evaporation and leakage. However, it is still a challenge to simultaneously enhance the strength and stretchability for an ionogel. Here, we report a mechanically robust and stretchable ionogel, employing fluorinated acrylic monomers to construct double network (DN) structure and ion-dipole interactions between ionic liquid and the resulted polymer backbone. The highly transparent ionogels present excellent mechanical properties, with ultimate stretchability up to 784% and strength 5.6 MPa. Noticeably, the addition of ionic liquid up to 30% results in a substantial increase of stretchablity without sacrificing the ultimate stress, due to the strong ion-dipole interactions. With a good conductivity (10−4 to 10−5 S cm−1), the ionogels can be used as flexible conductors for electroluminescent devices and wearable strain sensors, both displaying excellent performance. This study provides a practical strategy on the fabrication of robust and stretchable ionogels for flexible ionotronics.

engineering, chemical, environmental
Adaptable covalently cross-linked fibers

Hui Tan,Luzhi Zhang,Xiaopeng Ma,Lijie Sun,Dingle Yu,Zhengwei You

DOI: https://doi.org/10.1038/s41467-023-37850-w

IF: 16.6

2023-04-19

Nature Communications

Abstract:Fibers, with over 100 million tons produced each year, have been widely used in various areas. Recent efforts have focused on improving mechanical properties and chemical resistance of fibers via covalent cross-linking. However, the covalently cross-linked polymers are usually insoluble and infusible, and thus fiber fabrication is difficult. Those reported require complex multiple-step preparation processes. Herein, we present a facile and effective strategy to prepare adaptable covalently cross-linked fibers by direct melt spinning of covalent adaptable networks (CANs). At processing temperature, dynamic covalent bonds are reversibly dissociated/associated and the CANs are temporarily disconnected to enable melt spinning; at the service temperature, the dynamic covalent bonds are frozen, and the CANs exhibit favorable structural stability. We demonstrate the efficiency of this strategy via dynamic oxime-urethane based CANs, and successfully prepare adaptable covalently cross-linked fibers with robust mechanical properties (maximum elongation of 2639%, tensile strength of 87.68 MPa, almost complete recovery from an elongation of 800%) and solvent resistance. Application of this technology is demonstrated by an organic solvent resistant and stretchable conductive fiber.

multidisciplinary sciences

Controlling the elasticity of polyacrylonitrile fibers via ionic liquids containing cyano-based anions

Effect of the Ionic Liquid Structure on the Melt Processability of Polyacrylonitrile Fibers.

Electrospinning of Polyacrylonitrile Fibers from Ionic Liquid Solution

Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase.

Pultrusion Spinning of Elastic Ionogel Fibers

Tentative Confinement of Ionic Liquids in Nylon 6 Fibers: A Bridge between Structural Developments and High-Performance Properties

Non-Coagulant Spinning of High-Strength Fibers from Homоpolymer Polyacrylonitrile Synthesized via Anionic Polymerisation

Plastic deformation of the microfibrils in wet polyacrylonitrile fibers induced by the stretching field

Controlled Structural Relaxation of Aramid Nanofibers for Superstretchable Polymer Fibers with High Toughness and Heat Resistance

Hydrogel-assisted microfluidic spinning of stretchable fibers via fluidic and interfacial self-adaptations

Flexible Conductive Fibers from Alginate, Cellulose Nanocrystals, and Polyaniline by Wet Spinning

New Insights into Orientation Differences Between Skin and Core Regions of Polyacrylonitrile Fibers During Pre-Stabilization with the Stretching Process

Nanostructured Electrospun Hybrid Graphene/Polyacrylonitrile Yarns

Electromagnetic Functionalized Ultrafine Polymer/γ-Fe2o3 Fibers Prepared by Magnetic-Mechanical Spinning and Their Application As Strain Sensors with Ultrahigh Stretchability

Wet‐spun porous fibers from high internal phase emulsions: Continuous preparation and high stretchability

Fabrication of shape-controllable polyaniline micro/nanostructures on organic polymer surfaces: obtaining spherical particles, wires, and ribbons.

High-performance cellulosic filament fibers prepared via dry-jet wet spinning from ionic liquids

Morphologies and Crystal Structures of Styrene–acrylonitrile/isotactic Polypropylene Ultrafine Fibers Fabricated by Melt Electrospinning

Patterned, highly stretchable and conductive nanofibrous PANI/PVDF strain sensors based on electrospinning and in situ polymerization.

Enhanced stretchability and robustness towards flexible ionotronics via double-network structure and ion-dipole interactions

Adaptable covalently cross-linked fibers