Abstract:Because of their high filler loadings, commercial-grade clean flame-retardant materials have unstable mechanical properties. To address this issue, intumescent polymers can be used to develop clean flame retardants with very low levels of smoke and toxicity generation. An intumescent flame retardant (IFR) system composed of red phosphorus (RP), zinc borate (ZB), and a terpolymer of ethylene, butyl acrylate, and maleic anhydride (EBM) was used to prepare EVA (ethylene-vinyl acetate) and EVA/LLDPE (linear low-density polyethylene) composites; their mechanical and flammability properties were systematically investigated. The limiting oxygen index (LOI) of the EVA/LLDPE (as base material) composite containing RP and ZB mixed with nonhalogenated flame retardant, mainly magnesium hydroxide (MH) and coadditives, including processing aids and thermal stabilizers, was established. RP was found to have little effect on the tensile properties of EVA/LLDPE 118W/120 phr flame-retardant (MH + RP) composites. There was a minute difference in the effective trend of RP between tensile strength and elongation at break. Following the addition of ZB, the elongation at break of the composites gradually decreased with increasing RP content and then leveled off when the RP content was over 10 phr. Mechanical properties (elongation at break and tensile strength) can be best maintained at below 10 phr content of RP. The mechanical properties decreased with lower amounts of EBM content. In addition, flame retardancy increased when the EBM content decreased. The findings further revealed that MH and RP have poor compatibility, yielding poor mechanical properties. The LOI greatly increased with RP content, even though the total content of flame retardants (main + intumescent flame retardant) was the same in all formulations. Only over 5 phr RP content formulations passed V-0 of the UL-94 test. When under 5 phr, the RP content formulations did not pass V-0 of the UL-94 test.

Electrical insulation performance of flame retardant fillers filled with polypropylene/ethylene propylene diene monomer composites

Improving the flame retardancy and mechanical properties of high-density polyethylene-g-maleic anhydride with a novel organic metal phosphonate

Improving Insulation Properties of Epoxy Filled with Surface Fluorinated Polystyrene Nanospheres

Toughening of Polypropylene Highly Filled with Aluminum Hydroxide

A Study of the Novel Intumescent Flame‐retarded PP/EPDM Copolymer Blends

Flammability, thermal stability, and mechanical properties of ethylene‐propylene‐diene monomer/polypropylene composites filled with intumescent flame retardant and inorganic synergists

Synergistic Effects of Layered Double Hydroxide with Phosphorus-Nitrogen Intumescent Flame Retardant in PP/EPDM/IFR/LDH Nanocomposites

Novel Intumescent Flame Retardant Masterbatch Prepared Through Different Processes and Its Application in EPDM/PP Thermoplastic Elastomer: Thermal Stability, Flame Retardancy, and Mechanical Properties

A Systematic Investigation on the Influence of Intumescent Flame Retardants on the Properties of Ethylene Vinyl Acetate (EVA)/Liner Low Density Polyethylene (LLDPE) Blends

Investigations of Flame Retardancy, Mechanical and Thermal Properties of Woven Hemp/PP Hybrid Composite for Insulating Material Reinforced with Synthetic Silicon and Zinc Oxides

Modulating Thermal Conductivity and Flame Retardancy of Polyolefin Composites via Distributed Structures of Magnesium Hydroxide and Hexagonal Boron Nitride

Zinc hydroxystannate coated by polyphosphazene to improve the fire safety and suppress the smoke of epoxy resin

Study of flame resistant ethylene-propylene rubber insulation formulary

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

Mechanical, Dielectric and Flame-Retardant Properties of GF/PP Modified with Different Flame Retardants

Boosting Flame Retardancy of Polypropylene/Calcium Carbonate Composites with Inorganic Flame Retardants

Flame protection capability of waterborne epoxy coatings enhanced by inorganic-organic phenyl zirconium phosphate anchored boron nitride

Polypyrrole combined with phenylzirconium phosphate loaded carbon spheres for reinforcing flame protection of composite coatings

Mechanical Properties and Flame-Retardant of PP/MRP/Mg(OH)2/Al(OH)3 Composites

Synergistic effect of expandable graphite and intumescent flame retardants on the flame retardancy and thermal stability of polypropylene

Electrical Properties of Polyethylene/Polypropylene Compounds for High-Voltage Insulation