Abstract:Parabolic trough collector (PTC) is the most cost-effective and mature concentrated solar power (CSP) technology for solar thermal utilization. However, the highly concentrated solar irradiation on the bottom of the absorber tube causes high local temperature, thermal stress and deformation, further leading to damage and performance degradation of PTC. In order to alleviate the above problem, a novel parabolic trough receiver (PTR) with ribbed absorber tube is proposed to improve the thermo-mechanical performance of PTC Moreover, the multi-objective optimization is employed to determine the optimal parameter combinations (slant angle ( β ), size (e), pitch (p), and number of the ribs (N)) of ribbed absorber tube coupled with 3D numerical simulation and the genetic algorithm (GA). Based on the TOPSIS method and performance evaluation criteria (PEC) value, the ribbed absorber tube with the optimal geometric parameters of β = 15 ° , N = 6 , e = 4 . 5 mm and p = 20 mm is selected in the Pareto Front as the suggested optimal design. Furthermore, the performance of the PTRs at different inlet temperature of the fluid ( T i n = 400 –600K), direct normal irradiance (DNI=300–1000 W/m2) and mass flow rate (M=0.62–3.72kg/s) are evaluated. It is found that the ribbed absorber tube can effectively disturb the fluid near the boundary and induce longitudinal vortexes flow, which results in significant improvement in heat transfer between fluid and absorber tube, thereby enhancing the performance of the PTC. Compared to the plain tube, the heat transfer and flow resistance of the optimal ribbed absorber are enhanced by 57%–225% and 222%–630%, and the heat loss is lessened by up to 79.3%, resulting in 2.3% and 2.2% improvement in the heat collecting efficiency and overall efficiency. The findings in this paper may provide practical guidelines for developing efficient PTC.

Geometric optimization on optical performance of parabolic trough solar collector systems using particle swarm optimization algorithm

Heliostat Field Aiming Strategy Optimization with Post-Installation Calibration

INVESTIGATION INTO OPTICAL PERFORMANCE ANALYSIS AND OPTIMIZATION OF PARABOLIC TROUGH CPV COLLECTOR

Optical performance investigation on flat receiver for parabolic trough solar collector based on the MCRT method

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

The Optimization Of Heliostat Canting In A Solar Power Tower Plant

Optimization of parabolic trough solar power plant operations with nonuniform and degraded collectors

Model construction and optical properties investigation for multi-sectioned compound parabolic concentrator with particle swarm optimization

Particle swarm optimization algorithm for optical-geometric optimization of linear fresnel solar concentrators

Optimization of Photovoltaic Power Plant Design Scheme Based on Power Generation Model

Optical, electrical, and thermal performance enhancement for a concentrating photovoltaic/thermal system using optimized polynomial compound parabolic concentrators

Enhancing the efficiency of solar parabolic trough collector systems via cascaded multiple concentration ratios

Numerical analysis and multi-objective optimization design of parabolic trough receiver with ribbed absorber tube

Numerical Simulation On The Optical And Thermal Performance Of A Modified Integrated Compound Parabolic Solar Concentrator

Multi-objective particle swarm optimization of flat plate solar collector using constructal theory

Design optimization and optical performance analysis on multi-sectioned compound parabolic concentrator with plane absorber

Model construction and performance investigation of multi-section compound parabolic concentrator with solar vacuum tube

Dynamic Performance Of Parabolic Trough Solar Collector

Performance Enhancement of Parabolic Trough Collector by Using Homogenizer and Spiral

Optical-thermal–mechanical comprehensive performance of the concentrating and collecting subsystem for the next-generation solar power tower based on heliostat field layouts optimization

Design of Solar Parabolic Trough Collector by Fem