Abstract:Parabolic trough collector is an up-and-coming technology for urban energy supply. To further enhance the optical-thermal efficiency of the collector, a modified receiver enhanced by solar and hot mirrors was proposed. In this receiver, two symmetrical solar mirrors were designed to collect more solar irradiance, and a transparent hot-mirror shield was employed to lessen the thermal loss. After the design, the collector performance was studied by developing an optical-thermal coupled model. Based on the model, firstly, the proposed receiver was compared with the conventional receiver and two existing modified receivers. Results indicate the proposed receiver can achieve an optical efficiency of 78.02%, which is higher than those of the existing modified receivers and is just 0.22% lower than that of the conventional one. Moreover, compared with the conventional receiver, the two existing modified receivers cannot improve the optical-thermal efficiency at sufficiently high direct normal irradiance or relatively low fluid temperature, which can be overcome by the proposed receiver. Furthermore, compared with the conventional receiver, the proposed receiver can lessen the thermal loss by 11.2–89.6 W·m−1, thus improving the receiver efficiency and the optical-thermal efficiency by 0.03–5.26% and 0.03–4.70%, respectively, under the typical ranges of the inlet temperature (573–823 K) and the direct normal irradiance (0.3–1 kW·m−2). Then, parameter analysis indicates the hot mirror with low emissivity is necessary for efficiently improving the optical-thermal efficiency. Finally, the proposed receiver can improve the optical-thermal efficiency more effectively at higher fluid temperature or larger coating emissivity. The above results signify that the proposed receiver can be helpful for enhancing the efficiency of the trough collector.

Design of Solar Parabolic Trough Collector by Fem

Post-Installation Heliostat Field Aiming Strategy Optimization Based on Heliostat Flux Distribution Measurements

Design and Optimization of Cavity Solar Collector

INVESTIGATION INTO OPTICAL PERFORMANCE ANALYSIS AND OPTIMIZATION OF PARABOLIC TROUGH CPV COLLECTOR

Numerical Simulation On The Optical And Thermal Performance Of A Modified Integrated Compound Parabolic Solar Concentrator

The Optimization Of Heliostat Canting In A Solar Power Tower Plant

Performance Enhancement of Parabolic Trough Collector by Using Homogenizer and Spiral

Dynamic Performance Of Parabolic Trough Solar Collector

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Geometric optimization on optical performance of parabolic trough solar collector systems using particle swarm optimization algorithm

Design, manufacture and testing of fiberglass reinforced parabola trough for parabolic trough solar collectors

Application of Entransy Theory in the Heat Transfer Optimization of Flat-Plate Solar Collectors

An Optimized Model and Test of the China'S First High Temperature Parabolic Trough Solar Receiver

Enhancing the efficiency of solar parabolic trough collector systems via cascaded multiple concentration ratios

Optical performance investigation on flat receiver for parabolic trough solar collector based on the MCRT method

Optimized design of a linear Fresnel collector with a compound parabolic secondary reflector

Design and Optimization of Elliptical Cavity Tube Receivers in the Parabolic Trough Solar Collector

Effect of different errors on deformation and thermal stress of absorber tube in solar parabolic trough collector

Efficiency enhancement of a solar trough collector by combining solar and hot mirrors

Sensitive Analysis for the Efficiency of a Parabolic Trough Solar Collector Based on Orthogonal Experiment

Optical, thermal and thermo-mechanical model for a larger-aperture parabolic trough concentrator system consisting of a novel flat secondary reflector and an improved absorber tube