Abstract:The co-reduction of Sm(III) and Zn(II) ions on the Mo electrode and the under potential deposition of Sm(III) ions on the liquid Zn electrode were investigated in LiCl-KCl molten salt at 873K. Cyclic voltammetry, square wave voltammetry and open-circuit chronopotentiometry techniques were employed to study the electrochemical behaviors of Sm(III), Zn(II) and Sm-Zn alloy formation. The results showed that on the inert Mo electrode the electro-reduction of Sm(III) took place in only one soluble-soluble electrochemical step Sm(III)/Sm(II), and the electrochemical step Sm(II)/Sm(0) was not observed within the electrochemical window. In contrast, the deposition potential of Sm(II)/Sm(0) shifted to the positive direction by forming SmxZny intermetallic compounds in both the co-reduction and under potential deposition process. In the co-reduction process, the signals of forming six kinds of SmxZny intermetallic compounds were observed in the high ZnCl2 containing melt, and the formation of SmxZny at about -1.56V is dominant. In the under potential deposition process, the dominant deposition process is also at about -1.6V. The formation of Sm-Zn alloys were carried out by potentiostatic electrolysis on both the Mo electrode and liquid Zn electrode. All the Sm-Zn alloys were characterized by scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS) and inductively coupled plasma atomic emission spectrometer (ICP-AES). The XRD results showed that the SmxZny compound prepared on the Mo electrode in the high ZnCl2 containing melt was SmZn12, while the SmxZny compound prepared on the liquid Zn electrode was predominantly Sm2Zn17.

Study on the molybdenum electro-extraction from MoS2 in the molten salt

Liquid zinc assisted electro-extraction of molybdenum

Electrochemical behavior and cathodic nucleation mechanism of molybdenum ions in NaCl-KCl

Electrochemical Behavior of Molybdenum in (Nacl–kcl–naf-Moo3) Molten Salt

Physico-Chemical Properties of Molten NaCl–KCl–Na2S System for Sulfide Electrolytic Desulfurization

In-situ Electron Diffraction Studies of Sodium Electrochemistry in MoS2

New Insight into Desodiation/Sodiation Mechanism of MoS<sub>2</sub>: Sodium Insertion in Amorphous Mo-S Clusters

Enhanced leaching of Mo by mechanically co-grinding and activating MoS2 with NaClO3 as an oxidizing additive

MoS2 Nanostructures: Synthesis and Electrochemical Mg2+ Intercalation

MoS2 Nanostructures: Synthesis and Electrochemical Mg2+ Intercalation.

Electrodeposition of Molybdenum Disulfide (MoS2) Nanoparticles on Monocrystalline Silicon

In situ TEM observing structural transitions of MoS2 upon sodium insertion and extraction

Electrochemical Extraction of Samarium from LiCl-KCl Melt by Forming Sm-Zn Alloys

In-situ synthesis of MoSi 2 coating on molybdenum substrate by electro-deoxidation of a SiO 2 layer in molten salt

Sodium Modified Molybdenum Sulfide Via Molten Salt Electrolysis As an Anode Material for High Performance Sodium-Ion Batteries.

Electrochemical Reaction Mechanism of the MoS2 Electrode in a Lithium-Ion Cell Revealed by in Situ and Operando X-ray Absorption Spectroscopy.

Electrochemical impedance spectroscopic study of the lithium storage mechanism in commercial molybdenum disulfide

Study on the Behavior of Electrochemical Extraction of Cobalt from Spent Lithium Cobalt Oxide Cathode Materials

In Situ Study of K+ Electrochemical Intercalating into MoS2 Flakes

Atomic Force Microscopy Studies on Molybdenum Disulfide Flakes As Sodium-Ion Anodes.

Preparation of MoB 2 Nanoparticles by Electrolysis of MoS 2 /B Mixture in Molten NaCl-KCl at 700 °C