Abstract:Inert atmosphere is normally necessary for fabrication of solid composite electrolytes (SCEs) as a crucial part of solid-state Li-metal batteries in order to avoid undesirable reactions induced by ambient moisture. Herein, we developed an air-processable technique to fabricate SCEs by employing LiCF3SO3 (LiOTf) as the Li salt, which was combined with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) as the fast Li-conductor and polyvinylidene difluoroethylene/polyvinyl acetate (PVDF/PVAC) as the polymer matrix. With the assistance of trace H2O dissolved in electrolyte solution, the room-temperature Li+ conductivity of the obtained aSCE reached as high as 5.09 × 10-4 S cm-1, which was over 3 orders of magnitude higher than that of the one (iSCE, 1.93 × 10-7 S cm-1) cast by the electrolyte solution prepared in an inert atmosphere. The theoretical calculation results reveal that the oxygen atom of H2O exhibits a high propensity to interact with the Li atom in LiOTf (Li···O), thereby establishing a hydrogen bond with the oxygen atom (H···O) in N,N-dimethylformamide (solvent). Such interactions promoted the dissociation of LiOTf and led to the formation of uniform Li+ transportation channels. Simultaneously, the composition distribution was also altered, resulting in a smoother surface of aSCE and lowered crystallinity of PVDF. On this basis, the LiOTf/LLZTO/PVDF/PVAC solution at 60 °C was directly coated onto the surface of the LiFePO4 (LFP) cathode to fabricate the LFP-aSCE film after drying in an oven. The assembled LFP-aSCE/Li battery wetted by trace sulfolane exhibited an initial Coulombic efficiency of 94.7% and a capacity retention rate of up to 96% at 0.2 C (137 mAh g-1) after 180 cycles and a high capacity of 143.7 mAh g-1 at 0.5 C (150 cycles). Overall, this work could pave the way for the facile fabrication of solid electrolytes.

A Perovskite Electrolyte That Is Stable in Moist Air for Lithium‐Ion Batteries

Excellent Stability of a Lithium‐Ion‐Conducting Solid Electrolyte Upon Reversible Li+/H+ Exchange in Aqueous Solutions

Stable Lithium-Ion Conducting Perovskite Lithium–strontium–tantalum–zirconium–oxide System

Highly Dense Perovskite Electrolyte with a High Li+ Conductivity for Li–ion Batteries

Enhanced Air and Electrochemical Stability of Li 7 P 3 S 11 –Based Solid Electrolytes Enabled by Aliovalent Substitution of SnO 2

Self‐Supporting Solid Electrolyte Based on Supramolecular Interaction for Stable Li Metal Batteries

Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer

Ultrathin Layered Double Hydroxide Nanosheets Enabling Composite Polymer Electrolyte for All‐Solid‐State Lithium Batteries at Room Temperature

Li∕Polymer Electrolyte∕Water Stable Lithium-Conducting Glass Ceramics Composite for Lithium–Air Secondary Batteries with an Aqueous Electrolyte

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries

Enhanced Ionic Conductivity and Interface Stability of Hybrid Solid-State Polymer Electrolyte for Rechargeable Lithium Metal Batteries

A Polyethylene Oxide Based Electrolyte Enabled by the Synergistic Effect of Active LiGaO2 Filler and Ionic Liquid for Superior Lithium Metal Batteries

LLTO-containing heterogeneous composite electrolyte with a stable interface enabling solid-state lithium metal batteries

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

Polydopamine Coated Lithium Lanthanum Titanate in Bilayer Membrane Electrolytes for Solid Lithium Batteries

10 μm‐Thick High‐Strength Solid Polymer Electrolytes with Excellent Interface Compatibility for Flexible All‐Solid‐State Lithium‐Metal Batteries

Solid-State Rigid Polymer Composite Electrolytes with In-Situ Formed Nano-Crystalline Lithium Ion Pathways for Lithium-Metal Batteries.

A Chitosan/Poly(ethylene Oxide)‐based Hybrid Polymer Composite Electrolyte Suitable for Solid‐State Lithium Metal Batteries

A Solid Electrolyte Based on Electrochemical Active Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> with PVDF for Solid State Lithium Metal Battery

Silica-assisted cross-linked polymer electrolyte membrane with high electrochemical stability for lithium-ion batteries

Effects of H2O on Improving the Performance of a Solid Composite Electrolyte Fabricated via an Air-Processable Technique