Abstract:One major cause of to environmental pollution is industrial dye wastewater. The main purpose of current work was synthesis and investigation of effectiveness of LDH–Ferrite–Biochar–Polymeric composites for removal of anionic dye (Acid blue 41) from wastewater. The co-precipitation technique is used to synthesize Zn–Al Layered double hydroxide-Manganese ferrite–Egg Shell biochar–Starch (Zn–Al–MnFe 2 O 4 –ESB–Sta), Cu–Al Layered double hydroxide–Cadmium ferrite–Eucalyptus bark biochar–Chitosan (Cu–Al–CdFe 2 O 4 –EBB–Cs), Cd–Al Layered double hydroxide–Cobalt ferrite–Jujube wood biochar–Sodium alginate (Cd–Al–CoFe 2 O 4 –JWB–Na–Alg), Mn–Al Layered double hydroxide–Copper ferrite–Mulberry Stem Biochar–Starch (Mn–Al–CuFe 2 O 4 –MSB–Sta) and Co–Al Layered double hydroxide–zinc ferrite-peanut shell biochar–carboxymethyl cellulose (Co–Al–ZnFe 2 O 4 –PSB–CMC). According to findings of recent studies, Zn–Al–MnFe 2 O 4 –ESB-Sta (40.1 mg/g), Cu–Al–CdFe 2 O 4 –EBB–Cs (35.6 mg/g), Cd–Al–CoFe 2 O 4 –JWB–Na–Alg (28.1 mg/g), Mn–Al–CuFe 2 O 4 –MSB-Sta (37.3 mg/g) and Co–Al–ZnFe 2 O 4 –PSB–CMC (31.2 mg/g) has adsorption capacity for acid blue 41 dye. All composites achieved maximum adsorption effectiveness in acidic range (2–5), eliminating AB-41 dye in 45 min at optimal dose 0.05 g and 150 mg/l initial dye concentration was optimum. After 30 °C, adsorption potential decreased, indicating exothermic mechanisms. The efficiency was still adequate after five cycles of regeneration. The Pseudo 2nd order Kinetics and Freundlich isotherm model were successfully implemented among the applied models. The aforementioned composites are deemed the most cost-effective, energy-efficient, ecologically friendly, and biologically renewable materials for treating wastewater containing AB-41 dye. The results indicate that Zn–Al–MnFe 2 O 4 –ESB–Sta is the most effective synthetic composite for water remediation among all others. Furthermore, it was discovered in a column study that the ideal bed height, flow rate, and inlet concentration of dye were 3 cm, 3.6 ml/min, and 50 mg/l, respectively, for achieving the highest adsorption of AB-41 dye.

Development of a ZnOS+C Composite as a Potential Adsorbent for the Effective Removal of Fast Green Dye from Real Wastewater

Accelerated Decoloration of Organic Dyes from Wastewater Using Ternary Metal/g-C3N4/ZnO Nanocomposites: An Investigation of Impact of g-C3N4 Concentration and Ni and Mn Doping

One-pot synthesis of zinc ferrite nanocomposite for ultrafast adsorption of Drimarene blue dye

Computational supported experimental insights in adsorption of Congo Red using ZnO/doped ZnO in aqueous solution

Facile synthesis of biomass derived economically viable carbon dot polymer nanocomposite: A perspective towards sustainable removal of dyes from synthetic wastewater

Zinc Oxide Nanoparticles and Their Application in Adsorption of Toxic Dye from Aqueous Solution

Green Synthesis of NiO/ZnO Nanocomposites for the Adsorption of Various Dyes

Green Synthesis of Zinc Oxide Nanoparticles (ZnO NPs) for Effective Degradation of Dye, Polyethylene and Antibacterial Performance in Waste Water Treatment

LDH–Ferrite–Biochar–Polymeric Composites for Enhanced Adsorption–Desorption of Acid Blue 41 and Real Textile Wastewater Purification: A Batch and Column Study

Poly O-toluidine-coated acetic acid modified eggshell-chitosan with ZnFe 2 O 4 nanoparticles as a new and promising sorbent nanocomposite for rapid removal of toxic dyes such as Brilliant Green and Acid Red from the aquatic environment

Sodium Docusate Surface-Modified Dispersible and Powder Zinc Peroxide Formulation: An Adsorbent for the Effective and Fast Removal of Crystal Violet Dye, an Emerging Wastewater Contaminant

Efficient dye degradation strategies using green synthesized ZnO-based nanoplatforms: A review

Sustainable Bio-Based Adsorbents for Simultaneous and Efficient Removal of Hazardous Dyes from Aqueous Solutions

Development of Elaeis guineensis/polyvinyl alcohol/carbon nanotube composites for efficient adsorption of dye: Experimental and theoretical approach

Synthesis and Characterization of Zinc Oxide Nanoparticle Anchored Carbon as Hybrid Adsorbent Materials for Effective Heavy Metals Uptake from Wastewater

ZIF‐8 Composites for the Removal of Wastewater Pollutants

Adsorption of cationic basic fuchsin dye from aqueous solution using green synthesized zinc oxide coated on reduced graphene oxide nanocomposite (ZnO-rGO NC)

CaO@ZrO2@g-C3N4 nanosorbent for superior malachite green dye selectivity and adsorption from contaminated water

Effect of the Standardized ZnO/ZnO-GO Filter Element Substrate driven Advanced Oxidation Process on Textile Industry Effluent Stream: Detailed Analysis of Photocatalytic Degradation Kinetics

Development of Efficient and Recyclable ZnO–CuO/g–C3N4 Nanocomposite for Enhanced Adsorption of Arsenic from Wastewater

Facile Fabrication of Embedded g-C3N4/MoS2 Nano-Adsorbent for Removal of Persistent Rhodamine B Contaminant in Aqueous Solution