Abstract:Recently, sodium ion batteries (NIBs) gained increasing attention, because of its abundant reserves and relatively even geological distribution. However, the development of NIBs is greatly hampered because of the lack of appropriate active materials for both cathodes and anodes. Since the Na ion is ca. 55% larger than the Li ion, finding suitable host materials with sufficiently large interstitial space to accommodate sodium ions and to allow reversible and rapid ion insertion and extraction is very difficult. NASICON-type Na3V2(PO4)3 has recently been considered as a prospective cathode material for NIBs, because of its highly covalent 3D framework crystalline structure, high energy density (~400 Wh/kg) and good thermal stability. For anode materials, disordered carbon is particularly attractive because of their large interlayer distance and disordered structure that could accommodate sodium ions. Here, we briefly present porous carbon based electrodes for NIBs with excellent rate performance: (1) Carbon-coated nanosized Na3V2(PO4)3 embedded in the porous carbon matrix (abbreviated as CC-NVP@PCM); (2) Nitrogen-doped activated porous carbon fibers (ACFs); (3)Flexible free-standing porous carbon nanofibers (P-CNFs) with three-dimensional (3D) interconnected structure. The CC-NVP@PCM was prepared by using a facile soft-chemistry based method with post heat-treatment. It shows high rate performance (44 mAhg-1at 200C ). This ultrahigh rate performance is comparable to that of supercapacitor, but with much higher energy density. The ACFs were synthesized by pyrolysis of Ppy nanofiber precursor. It shows excellent capacity retention and extraordinary rate performance. The reversible capacity at 0.05 Ag-1 is 296 mAhg-1 and could still maintain as 72 mAg-1 at a current of 10 Ag-1. In case of the P-CNFs electrode prepared by electrospinning, it delivers a reversible capacity of 266 mAh.g-1 after 100 cycles at 0.2C, corresponding to 80.3 % of the initial charge capacity. When cycled at a current density as high as 500 mAg-1 (2C), it still delivers a reversible capacity of ~140 mAh.g-1after 1000 cycles. The improvement of electrochemical performance of these porous carbon based electrodes for NIBs is attributed to the special design and porous structure, which confined a variety of advantages: hierarchical porous channels enabling short transport length for ions and electrons, carbon coated structure resulting in low resistances, good mechanical properties leading to the excellent morphology stability.

MOF-derived crystalline carbon with graphite-like crystal: A high initial coulombic efficiency, low potential and large capacity anode for Na-ion batteries

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Achieving High Initial Coulombic Efficiency for Competent Na Storage by Microstructure Tailoring from Chiral Nematic Nanocrystalline Cellulose

MOF-derived nitrogen-doped porous carbon nanofibers with interconnected channels for high-stability Li+/Na+ battery anodes

Synthesis of nitrogen-doped amorphous carbon nanotubes from novel cobalt-based MOF precursors for improving potassium-ion storage capability

MOF-derived 3D interconnected amorphous carbon nanowire networks for robust lithium storage

Heteroatomic Interface Engineering of MOF-Derived Metal-Embedded P- and N-Codoped Zn Node Porous Polyhedral Carbon with Enhanced Sodium-Ion Storage

Nitrogen-Doped Carbon for Sodium-Ion Battery Anode by Self-Etching and Graphitization of Bimetallic MOF-Based Composite

Liquid Gallium‐Assisted Pyrolysis of MOF Affording CNT Non‐Hollow Frameworks in High Yields for High‐Performance Sodium‐Ion Battery Anode

MOF-derived porous NiCo2S4 nanocrystals embedded in nitrogen-doped carbon nanorods as lithium battery anodes

Double-Morphology CoS2 Anchored on N-Doped Multichannel Carbon Nanofibers As High-Performance Anode Materials for Na-Ion Batteries

Tailoring Pseudo-Graphitic Domain by Molybdenum Modification to Boost Sodium Storage Capacity and Durability for Hard Carbon

MoC Ultrafine Nanoparticles Confined in Porous Graphitic Carbon As Extremely Stable Anode Materials for Lithium- and Sodium-Ion Batteries

Interlayer-expanded MoS2 nanosheets/nitrogen-doped carbon as a high-performance anode for sodium-ion batteries

High-temperature treatment induced carbon anode with ultrahigh Na storage capacity at low-voltage plateau

Nanosized Co encapsulated in porous carbon for ultra‐stable sodium‐ion batteries

A synthesis strategy of 3D carbon nanosheet anode with adsorption/intercalation-filling hybrid mechanism for high-performance sodium/potassium-ion batteries

Electrodes for Sodium-Ion Batteries with Excellent Rate Performance Using Porous Carbon Networks

Pyridinic N‐Dominated Hard Carbon with Accessible Carbonyl Groups Enabling 98% Initial Coulombic Efficiency for Sodium‐Ion Batteries

Tailored N-doped Porous Carbon Nanocomposites Through MOF Self-Assembling for Li/Na Ion Batteries.

MOF-derived hollow SiO<sub><i>x</i></sub>nanoparticles wrapped in 3D porous nitrogen-doped graphene aerogel and their superior performance as the anode for lithium-ion batteries