Abstract:High porosity (40% to 60%) 316L stainless steel containing well-interconnected open-cell porous structures with pore openness index of 0.87 to 1 were successfully fabricated by binder jetting and subsequent sintering processes coupled with a powder space holder technique. Mono-sized (30 μm) and 30% (by volume) spherically shaped poly(methyl methacrylate) (PMMA) powder was used as the space holder material. The effects of processing conditions such as: (1) binder saturation rates (55%, 100% and 150%), and (2) isothermal sintering temperatures (1000 ○C to 1200 ○C) on the porosity of 316L stainless steel parts were studied. By varying the processing conditions, porosity of 40% to 45% were achieved. To further increase the porosity values of 316L stainless steel parts, 30 vol. % (or 6 wt. %) of PMMA space holder particles were added to the 3D printing feedstock and porosity values of 57% to 61% were achieved. Mercury porosimetry results indicated pore sizes less than 40 μm for all the binder jetting processed 316L stainless steel parts. Anisotropy in linear shrinkage after the sintering process was observed for the SS316L parts with the largest linear shrinkage in the Z direction. The Young’s modulus and compression properties of 316L stainless steel parts decreased with increasing porosity and low Young’s modulus values in the range of 2 GPa to 29 GPa were able to be achieved. The parts fabricated by using pure 316L stainless steel feedstock sintered at 1200 ○C with porosity of ~40% exhibited the maximum overall compressive properties with 0.2% compressive yield strength of 52.7 MPa, ultimate compressive strength of 520 MPa, fracture strain of 36.4%, and energy absorption of 116.7 MJ/m3, respectively. The Young’s modulus and compression properties of the binder jetting processed 316L stainless steel parts were found to be on par with that of the conventionally processed porous 316L stainless steel parts and even surpassed those having similar porosities, and matched to that of the cancellous bone types.

A Novel Additive Texturing of Stainless Steel 316L Through Binder Jetting Additive Manufacturing

A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel

Binder Jetting Additive Manufacturing of High Porosity 316L Stainless Steel Metal Foams

Applying Binder Jetting Technology to 316L Stainless Steel Materials and Testing Its Mechanical and Dimensional Properties Depending on the Printing Method

Binder jetting additive manufacturing of 316L stainless-steel green parts with high strength and low binder content: Binder preparation and process optimization

Time-dependent wetting behavior of the micro-textured stainless steel 316L using the mechanical indentation method

Electron Beam Additive Manufacturing of SS316L with a Stochastic Scan Strategy: Microstructure, Texture Evolution, and Mechanical Properties

Fabrication of Cu-Infiltrated Journal Bearing by Binder Jetting Additive Manufacturing

Fatigue strength of additively manufactured 316L austenitic stainless steel

Surface Nanocrystallization Mechanism of Additive Manufactured 316L Stainless Steel Via High-Energy Shot Peening

Cold Isostatic Pressing to Improve the Mechanical Performance of Additively Manufactured Metallic Components

Surface mechanical attrition treatment of additively manufactured 316L stainless steel yields gradient nanostructure with superior strength and ductility

Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting

A large-volume 3D EBSD study on additively manufactured 316L stainless steel

Experimental Investigation into the Dry Reciprocating Wear Behavior of Additively Manufactured Austenitic Stainless Steel (316L) Alloys

(Digital Presentation) Understanding Metal Additive Manufactured Surfaces

Effect of bimodal powder on densification and mechanical properties of 316L stainless steel fabricated by binder jet 3D printing

Multiscale characterisation study on the effect of heat treatment on the microstructure of additively manufactured 316L stainless steel

Metal Binder Jetting Additive Manufacturing: A Literature Review

Comparison of Different Additive Manufacturing Methods for 316L Stainless Steel

Two-Dimensional X-Ray Diffraction (2D-XRD) and Micro-Computed Tomography (Micro-CT) Characterization of Additively Manufactured 316L Stainless Steel