Abstract:Perovskite solar cells have been attracting more and more attentions due to their extraordinary performances in the photovoltaic field. In view of the highest certified power conversion efficiency of 25.5% that is much lower than the corresponding Shockley-Queisser limit, understanding and quantifying the main loss factors affecting the power conversion efficiency of perovskite solar cells are urgently needed. At present, the three loss mechanisms generally recognized are optical loss, ohmic loss, and non-radiative recombination loss. Including the trap-assisted bulk recombination and surface recombination, the non-radiative recombination is proved to be the dominant recombination mechanism prohibiting the increase of efficiency. In this work, based on semiconductor physics, the expressions of bulk and surface recombination currents are analytically derived. Then taking the optical loss, series and shunt resistance losses, and bulk and surface recombination losses into considerations, an equivalent circuit model is proposed to describe the current density-voltage characteristics of practical perovskite solar cells. Furthermore, by comparing to the drift-diffusion model, the pre-defined physical parameters of the drift-diffusion model well agree with the fitting parameters retrieved by the equivalent circuit model, which verifies the reliability of the proposed model. For example, the carrier lifetimes in the drift-diffusion model are consistent with the recombination factors in the equivalent circuit model. Moreover, when the circuit model is applied to analyze experimental results, the fitting outcomes show favorable consistency to the physical investigations offered by the experiments. And the relative fitting errors of the above cases are all less than 2%. Through employing the model, the dominant recombination type is clearly identified and split current density-voltage curves characterizing different loss mechanisms are offered, which intuitively reveals the physical principles of efficiency loss. Additionally, through calculating the efficiency loss ratios under the open-circuit voltage condition, quantifying the above-mentioned loss mechanisms becomes simple and compelling. The prediction capability of the model is expected to be enhanced if a series of light intensity dependent current density-voltage curves are fitted simultaneously. Consequently, this model offers a guideline to approach the efficiency limit from a circuit-level perspective. And the model is a comprehensive simulation and analysis tool for understanding the device physics of perovskite solar cells.

Quantitative loss analysis of opaque perovskite solar cells using transient and steady-state characterization

Loss Mechanism Analyses of Perovskite Solar Cells with Equivalent Circuit Model

Quantifying Energy Losses in Planar Perovskite Solar Cells

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Quantifying Efficiency Loss of Perovskite Solar Cells by a Modified Detailed Balance Model

Loss Mechanism Analyses of Perovskite Solar Cells with an Equivalent Circuit Model

Open-circuit and short-circuit loss management in wide-gap perovskite p-i-n solar cells

Unveiling Energy Conversion Mechanisms and Regulation Strategies in Perovskite Solar Cells

Performance loss analysis and design space optimization of perovskite solar cells

Quantifying Nonradiative Recombination and Resistive Losses in Perovskite Photovoltaics: A Modified Diode Model Approach

Quantifying Efficiency Limitations in All‐Inorganic Halide Perovskite Solar Cells

Mapping of Internal Ionic/Electronic Transient Dynamics in Current–Voltage Operation of Perovskite Solar Cells

Efficiency Potential and Voltage Loss of Inorganic CsPbI2Br Perovskite Solar Cells

Degradation Analysis of Perovskite Solar Cells via Short-Circuit Impedance Spectroscopy: A case study on NiOx passivation

Exploiting Electrical Transients to Reveal Charge Loss Mechanism of Junction Solar Cells

Comprehensive voltage-loss analysis and reduction of radiative recombination voltage loss in quantum-structured solar cells

Mismatch of Quasi–Fermi Level Splitting and V oc in Perovskite Solar Cells

Quantifying the Energy Losses in CsPbI 2 Br Perovskite Solar Cells with an Open-Circuit Voltage of up to 1.45 V

Recombination Pathways in Perovskite Solar Cells

Unveiling the surface-interface properties of perovskite crystals and pivotal regulation strategies