Abstract:Accessibility and all-weather functioning of the roads in Himalayas form the backbone of the overall development of the region. All-weather roads are being constructed in the region to cater to the needs of this region and provide quick accessibility to remote areas. Majority of roads are constructed along the hill slopes. Construction of new roads as well as the widening project involves the excavation on hill side of the slope. As a consequence, steep-cut slopes are formed at the side of the road. In principle, adequate analysis and design is warranted while taking up construction activities. However, rigorous slope stability analysis for each section is not always feasible. The field engineers therefore rely on personal experience, judgment and perception, especially when quick decisions are required. Looking at the problem and the importance of hill roads in the Himalayas, urgent need for developing site-specific tools is being felt in organizations dealing with mitigation activities in this region. The tools are required not only at the time of construction but also during the maintenance and emergent situation of natural disasters and also to look out for safe alternate routes. In the field of rock mechanics, rock mass classification systems have been found to be very effective in addressing similar problems. Rock mass rating (Bieniawski, in: Transaction of the South African Institution of Civil Engineers, 1973), slope mass rating (Romana in: International symposium on the role of rock mechanics in excavations for mining and civil works, International Society of Rock Mechanics, Zacatecas, 1985), geological strength index (Marinos et al. in Bull Eng Geol Environ 64:55–65, 2005. https://doi.org/10.1007/s10064-004-0270-5; Morelli in Geotech Geol Eng 35:2803–2816, 2017. https://doi.org/10.1007/s10706-017-0279-8; Marinos et al. in: Underground works under special conditions, 2010. https://doi.org/10.1201/noe0415450287.ch2) and the Q systems (Barton et al. in Rock Mech 6:189–236, 1974. https://doi.org/10.1007/BF01239496) have been used in the past. In the present manuscript, the applicability of the Joint Factor concept (Ramamurthy in Indian Geotech J 8:1–74, 1985; Ramamurthy and Arora in Int J Rock Mech Min Sci 31:9–22, 1994. https://doi.org/10.1016/0148-9062(94)92311-6; Singh et al. in Rock Mech Rock Eng 35:45–64, 2002. https://doi.org/10.1007/s006030200008) is extended to propose an empirical approach for quick assessment of hazard of rock slopes for cut slopes in Garhwal Himalayas. The main objective of the present study is to come out with a methodology to work out an approximate value of the safe height of steep-cut rock slopes. The study has been conducted on steep-cut rock slopes of Garhwal Himalayas. Site investigations followed by desk studies have been done to determine the important parameters of the discontinuities observed in the field. Joint Factor concept is used for evaluating the instability of cut rock slopes. Charts are suggested to assess the hazard and safe height of steep-cut rock slopes based on simple inputs which can be easily obtained in the field. Validation of the proposed approach was done by assessing the stability of cut rock slopes from five different sites. It can be concluded that the observation made in the field and the result obtained from the chart are in agreement with each other.

Advancing slope stability assessment in weathered metamorphic terrains: a probabilistic approach utilizing the SSPC method on Highland Complex, Sri Lanka

Probability Analysis of Submarine Landslides Based on the Response Surface Method: A Case Study from the South China Sea

Probabilistic Analysis of Underground Rock Excavations Using Response Surface Method and SORM

Improved Probabilistic Kinematic Analysis Procedure Based On Finite Size Discontinuities And Its Application To A Rock Slope At Open Pit Mine In Us

Development of a Probabilistic Kinematic Wedge Sliding Analysis Procedure and Application to a Rock Slope at a Hydropower Site in China

Development of a probabilistic block theory analysis procedure and its application to a rock slope at a hydropower station in China

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

A comparison of slope stability assessment techniques using different rock mass classification systems and finite element method (FEM): A case study from the Garhwal Himalayas, India

Analyses of Different Slope Failures along the Road Sections of West Sikkim, India using Rock Mass Classification and Kinematic Analysis Approach

A novel proposed classification system for rock slope stability assessment

Enhancing weathered slope stability assessment through the integration of slake durability index, elastic modulus of knocking ball, and electrical resistivity tomography

Probabilistic block theory analysis for a rock slope at an open pit mine in USA

Probabilistic back analysis for rainfall-induced slope failure using MLS-SVR and Bayesian analysis

Stochastic Rock Slope Stability Analysis: Open Pit Case Study with Adjacent Block Caving

Evaluation of slope stability through rock mass classification and kinematic analysis of some major slopes along NH-1A from Ramban to Banihal, North Western Himalayas

An Empirical Approach for Quick Assessment of Hazard and Safe Height of Steep-Cut Rock Slopes in Garhwal Himalayas

Quantification of Rock Mass Condition Based on Fracture Frequency Using Unmanned Aerial Vehicle Survey for Slope Stability Assessment

Himalayan rock slope stability investigation using empirical and numerical approach along NH-44 of Jammu and Kashmir, India

Probabilistic Based Reliability Slope Stability Analysis Using FOSM, FORM, and MCS

Rock slope stability assessment based on the critical failure state curve for the generalized Hoek‒Brown criterion

Novel methods for quantitative analysis of kinematic stability and slope mass rating in jointed rock slopes with the aid of a new computer application