An Empirical Approach for Quick Assessment of Hazard and Safe Height of Steep-Cut Rock Slopes in Garhwal Himalayas

Lal Hruaikima,Mahendra Singh,Sarada Prasad Pradhan,Jaspreet Singh

DOI: https://doi.org/10.1007/s40098-023-00784-7

2023-10-27

Indian Geotechnical Journal

Abstract:Accessibility and all-weather functioning of the roads in Himalayas form the backbone of the overall development of the region. All-weather roads are being constructed in the region to cater to the needs of this region and provide quick accessibility to remote areas. Majority of roads are constructed along the hill slopes. Construction of new roads as well as the widening project involves the excavation on hill side of the slope. As a consequence, steep-cut slopes are formed at the side of the road. In principle, adequate analysis and design is warranted while taking up construction activities. However, rigorous slope stability analysis for each section is not always feasible. The field engineers therefore rely on personal experience, judgment and perception, especially when quick decisions are required. Looking at the problem and the importance of hill roads in the Himalayas, urgent need for developing site-specific tools is being felt in organizations dealing with mitigation activities in this region. The tools are required not only at the time of construction but also during the maintenance and emergent situation of natural disasters and also to look out for safe alternate routes. In the field of rock mechanics, rock mass classification systems have been found to be very effective in addressing similar problems. Rock mass rating (Bieniawski, in: Transaction of the South African Institution of Civil Engineers, 1973), slope mass rating (Romana in: International symposium on the role of rock mechanics in excavations for mining and civil works, International Society of Rock Mechanics, Zacatecas, 1985), geological strength index (Marinos et al. in Bull Eng Geol Environ 64:55–65, 2005. https://doi.org/10.1007/s10064-004-0270-5; Morelli in Geotech Geol Eng 35:2803–2816, 2017. https://doi.org/10.1007/s10706-017-0279-8; Marinos et al. in: Underground works under special conditions, 2010. https://doi.org/10.1201/noe0415450287.ch2) and the Q systems (Barton et al. in Rock Mech 6:189–236, 1974. https://doi.org/10.1007/BF01239496) have been used in the past. In the present manuscript, the applicability of the Joint Factor concept (Ramamurthy in Indian Geotech J 8:1–74, 1985; Ramamurthy and Arora in Int J Rock Mech Min Sci 31:9–22, 1994. https://doi.org/10.1016/0148-9062(94)92311-6; Singh et al. in Rock Mech Rock Eng 35:45–64, 2002. https://doi.org/10.1007/s006030200008) is extended to propose an empirical approach for quick assessment of hazard of rock slopes for cut slopes in Garhwal Himalayas. The main objective of the present study is to come out with a methodology to work out an approximate value of the safe height of steep-cut rock slopes. The study has been conducted on steep-cut rock slopes of Garhwal Himalayas. Site investigations followed by desk studies have been done to determine the important parameters of the discontinuities observed in the field. Joint Factor concept is used for evaluating the instability of cut rock slopes. Charts are suggested to assess the hazard and safe height of steep-cut rock slopes based on simple inputs which can be easily obtained in the field. Validation of the proposed approach was done by assessing the stability of cut rock slopes from five different sites. It can be concluded that the observation made in the field and the result obtained from the chart are in agreement with each other.