Abstract:The construction industry, integral to national infrastructure development, faces environmental challenges attributed to Portland cement's high energy consumption and carbon dioxide emissions during production. To address this challenge, this study integrated waste fly ash and polystyrene into geopolymers to enhance environmental sustainability and economic feasibility. The objectives included developing low-density geopolymers using polystyrene inclusion, optimizing component mixing ratios, assessing activator concentration effects, determining the optimal curing conditions, and characterizing the resulting geopolymers. Through experimental investigation, low-density geopolymers were developed with optimized component ratios and curing conditions. The experimental procedure began with the classification of fly ash to determine its suitability for various applications, revealing it to be type F. Geopolymers were fabricated using a mixture of fly ash, water, sodium hydroxide activator, and polystyrene. Varied concentrations of sodium hydroxide and polystyrene were employed. Two curing temperatures, 60 °C and 100 °C, were explored. The results showed that greater sodium hydroxide concentrations improved the structure and compressive strength of the geopolymers. The results also demonstrated a significant correlation between the curing conditions and the mechanical properties of the produced geopolymers. The goal of reducing the density of the geopolymers for lightweight thermal-resistant applications was achieved through polystyrene incorporation. However, polystyrene incorporation negatively impacted the compressive strength. The optimum production conditions for the sodium hydroxide-varied samples were 8 g sodium hydroxide/g sample cured at 100 °C, while the optimum production conditions for polystyrene-varied samples were 1 g polystyrene/g sample cured at 60 °C. The findings confirmed the viability of utilizing fly ash and polystyrene wastes to produce sustainable, low-density, thermal-resistant construction materials. Overall, increasing activator concentration enhances the strength and durability of geopolymers, while polystyrene contributes to the development of lightweight geopolymers, provided the appropriate amount is utilized. To ensure replicability, the formulation procedure and input quantities must be tailored according to the intended geopolymer application. These insights offer practical guidance for optimizing geopolymer manufacturing processes towards enhanced sustainability and performance.

Evaluation of Different Fly Ash-Blast Furnace Slag Formulations for Design of Geopolymers in Radioactivity Disposal Applications

Research on Resource Utilization of Dyeing Sludge with High Calcium Fly Ash

Solidification performance and mechanism of typical radioactive nuclear waste by geopolymers and geopolymer ceramics: A review

On the Sustainable Utilization of Geopolymers for Safe Management of Radioactive Waste: A Review

Design of sustainable geopolymeric matrices for encapsulation of treated radioactive solid organic waste

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Impacts of Alkaline Washing Pretreatment on Municipal Solid Waste Incineration Fly Ash (MSWI FA) and Resulting Geopolymers

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals

The Long-Term Leaching Behavior of Heavy Metals in Geopolymers and Portland Cement Bricks Containing Mswi Fly Ash: A Comparative Study

Elaboration of geopolymer package derived from uncalcined phosphate sludge and its solidification performance on nuclear grade resins loaded with 134Cs

Waste Valorization: Sustainable Geopolymer Production Using Recycled Glass and Fly Ash at Ambient Temperature

Development of Foamed Geopolymer with Addition of Municipal Solid Waste Incineration Fly Ash

The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer.

Development of a Low-Density Waste-Based Geopolymer Construction Material

Preparation of functional geopolymers from municipal solid waste incineration fly ash: An approach combining experimental and computational simulation studies

Properties and Cementation Mechanism of Geopolymer Backfill Paste Incorporating Diverse Industrial Solid Wastes

Potential Solidification/stabilization of Clay-Waste Using Green Geopolymer Remediation Technologies

Encapsulation of iodine-loaded adsorbents in blended Portland cement and geopolymer wasteforms

Applicability of waste foundry sand stabilization by fly ash geopolymer under ambient curing conditions

Study on basic performance and drying shrinkage of binary solid waste geopolymer prepared with recycled powders and slag

Effects of Gamma-Ray Irradiation on Leaching of Simulated 133 Cs + Radionuclides from Geopolymer Wasteforms