Abstract:The aim of CO2 enhanced gas recovery (CO2-EGR) is to extract more natural gas from depleted gas reservoirs and simultaneously sequestrate large amount of CO2. To achieve these dual objectives, the optimization of CO2 injection strategy in CO2-EGR is proposed to achieve maximum benefit. Thus, the focus of this work is to study CO2-EGR by numerical simulation and optimization. For this purpose, a 3D reservoir model with 'five-spot' well pattern (an injection well and four production wells) is established for simulations using the multiphase simulator TOUGH2, and the main focus is on optimization of CO2 injection rate and well placements by coupling the genetic algorithm (GA) with TOUGH2. Simulations are performed to determine the optimal injection rate for both two types of injection wells placements, one vertical injection well with number of perforations at various depth and orthogonal horizontal wells on top of the reservoir. The results show that multipoint perforations in the vertical injection well and the horizontal injection wells with appropriate length show improvement in natural gas recovery and CO2 storage compared to the injection location at the reservoir bottom. More importantly, the optimized injection rate determined by GA-TOUGH2 can substantially improve the natural gas recovery factor for both vertical and horizontal well injection. After computing a number of optimized cases, it's shown that the case employing the horizontal injection wells with optimized injection rate of 0.0778 kg/s achieves the maximum recovery of 67.21% and maximum CO2 storage efficiency of 69.54%, equal to 23.88 × 106 kg of natural gas exploited from the depleted reservoir and 74.52 × 106 kg of CO2 stored in pore volume of 1.81 × 106 m3 of the reservoir. This case also has minimum injection pressure jump of 0.08 MPa thereby reducing the risk of formation fracture and CO2 leakage. However, by conducting a simple cost/benefit analysis, it is determined that this optimally performing case is not the best economically because of higher drilling cost of horizontal well compared to a vertical well. It is found that a vertical well with two suitably placed perforations with optimized injection rate of 0.1025 kg/s is economically superior since the previously used production wells can be reused for CO2 injection, which can therefore reduce both the equipment and the drilling costs. It is hoped that the findings of this work should provide some insights into the optimization of CO2-EGR with maximum economic benefit for implementation in industrial practice.

Modelling of flue gas injection and collaborative optimization of multi-injection parameters for efficient coal-based carbon sequestration combined with BP neural network parallel genetic algorithms

Optimal injection timing and gas mixture proportion for enhancing coalbed methane recovery

Optimization of Enhanced Coalbed Methane Recovery with C02 Injection

Modeling Study of Enhanced Coal Seam Gas Extraction via N2 Injection Under Thermal-Hydraulic-Mechanical Interactions

Coupled adsorption-hydro-thermo-mechanical-chemical modeling for CO2 sequestration and well production during CO2-ECBM

Numerical investigation of flue gas injection enhanced underground coal seam gas drainage

Modeling and coupling analysis of enhanced coalbed methane recovery by gas injection

Molecular Insights on Competitive Adsorption of CH4, CO2 and Flue Gas in Shallow and Deep Coals for Gas Injection Technology

Experimental and numerical model of anisotropic permeability and CO2 injectivity of coal during CO2 enhanced coalbed methane recovery process

Numerical Simulation of the Effect of Injected CO2 Temperature and Pressure on CO2-Enhanced Coalbed Methane

A small-scale experimental study of CO2 enhanced injectivity methods of the high-rank coal

Numerical study on CO2 sequestration in low-permeability coal reservoirs to enhance CH4 recovery: Gas driving water and staged inhibition on CH4 output

Effects of Injection Pressure and Duration on Alternate High-Pressure Water-Gas Sequestration of Coalbed Methane

A study on the carbon dioxide injection into coal seam aiming at enhancing coal bed methane (ECBM) recovery

Synergistic ECBM extraction technology and engineering application based on hydraulic flushing combing gas injection displacement in low permeability coal seams

Numerical Simulation of CO2-ECBM Based on Multi-Physical Field Coupling Model

A Mathematical Model to Study the Coupling Effect of Deformation-Seepage-Heat Transfer on Coalbed Methane Transport and Its Simulative Application

Modeling and simulation on heat-injection enhanced coal seam gas recovery with experimentally validated non-Darcy gas flow

Optimization of coal chemical process parameters and energy saving and emission reduction based on genetic algorithm

Mechanistic insight into the optimal recovery efficiency of CBM in sub-bituminous coal through molecular simulation

Numerical simulation and optimization of injection rates and wells placement for carbon dioxide enhanced gas recovery using a genetic algorithm