Abstract:The open-loop current transducer comprises a magnetic core made of soft magnet material and includes a Hall sensor. Traction motors in applications such as electric vehicles tend to be driven at high speeds. It pushes the inverters to increase the fundamental frequency of the output current above 1 kHz. However, this high frequency current generates eddy currents in the magnetic core of the current transducers. They deteriorate the measurement data thereby resulting the amplitude error and phase shift error, which is applied open-loop current transducer with the lamination magnetic core. In this study, the errors of an open-loop current transducer due to eddy currents were analyzed through mathematical modeling and finite element method (FEM). Furthermore, the impact of the error on permanent magnet synchronous motor current control was studied. The phase shift error of the current transducer used in this study reaches 3.6 degree when the frequency of current was 1.5 kHz, resulting in about a 20% torque reduction during field-weakening operation at 200 kW, 22500 rpm. On the other hand, the amplitude error of the current transducer is only 0.18% in the same condition. In order to correct the error, an online compensation method is proposed based on FEM simulation results. The phase shift error was verified through the experiments with a , 3-phase inductive load. The proposed method was also validated through the experimental results conducted for variable frequencies from 500 Hz to 1.5 kHz.

Analysis and compensation of current measurement errors using one shunt current sensing in high-speed region

Cost-Effective Current Measurement Technique for Four-Phase SRM Control by Split Dual Bus Line Without Pulse Injection and Voltage Penalty

Current Measurement Error Compensation Based on Modified Multiple Complex-Coefficient Filters in PMSM Drives

A Sinusoidal Current Control Method for SPMSM Considering Uneven Demagnetization Fault

Compensation of Current Measurement Error in PMSM Drives Based on Virtual Windings

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

A Nonintrusive Current Sensor Gain Tuning Method for Interior Permanent Magnet Synchronous Motor Drives Using Controlled Short-Circuit Tests

Phase Current Reconstruction Error Suppression Method for Single DC-Link Shunt PMSM Drives at Low-Speed Region

Independent Current Control of Dual Parallel SRM Drive Using a Public Current Sensor

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Compensation Method for Current Measurement Errors in the Synchronous Reference Frame of a Small-Sized Surface Vehicle Propulsion Motor

Online Sensorless Position Estimation for Switched Reluctance Motors Using One Current Sensor

An I/f Control Method With Closed-loop Regulation of Current Vector for Surface Permanent Magnet Synchronous Motor Drives

Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.

Current Sampling Scheme for Finite-Control-Set Model Predictive Control of PMSM Drives with Two Shunt Resistors

Analysis and Compensation of Phase Shift Errors of an Open-Loop Current Transducer Considering Eddy Current

New Three-Phase Current Reconstruction for PMSM Drive with Hybrid Space Vector Pulsewidth Modulation Technique

Current Ripple Sampling based Angle Error Compensation for High-speed Permanent Magnet Synchronous Motor Sensorless Control Considering Inductance Saturation

Online correction method for phase current gain errors in permanent magnet synchronous motor sensorless control

A Position Sensorless Control Strategy for PMSM Drives with Single Phase Current Sensor

A High Frequency Injection Technique With Modified Current Reconstruction for Low-Speed Sensorless Control of IPMSMs With a Single DC-Link Current Sensor