Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

Mechanochemical synthesis of LAGP/PEG hybrid solid electrolyte: Investigation of surface structure and chemistry

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

In situ synthesis of cross-linking gel polymer electrolyte for lithium metal batteries

Molecular engineering of a gel polymer electrolyte via in-situ polymerization for high performance lithium metal batteries

Realization of Enhanced Interfacial Lithium-Ion Transfer in Composite Polymer Electrolytes via Grafting Oligo-PEG Molecular Brushes on Silica-Coated Nanofibers for All-Solid-State Lithium Metal Batteries

Li-Ga Alloy-Contained Hybrid Solid Electrolyte Interphase Induced by In Situ Polymerization for High-Performance Lithium Metal Batteries

In Situ Polymerization Of Methoxy Polyethylene Glycol (350) Monoacrylate And Polyethyleneglycol (200) Dimethacrylate Based Solid-State Polymer Electrolyte For Li-Ion Batteries

In‐Situ Polymerization Confined PEGDME‐Based Composite Quasi‐Solid‐State Electrolytes for Lithium Metal Batteries

Facile Fabrication of Polymer Electrolytes via Lithium Salt-Accelerated Thiol-Michael Addition for Lithium-Ion Batteries

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Facile Fabrication of Polymer Electrolytes with Branched Structure Via Deep Eutectic Electrolyte-Enabled in Situ Polymerizations.

Synergistic Enhancement of Mechanical and Electrochemical Properties in Grafted Polymer/Oxide Hybrid Electrolytes

Hybrid organic-inorganic nano-composites for solid-state battery electrolytes

Immobilizing Ceramic Electrolyte Particles into a Gel Matrix Formed In Situ for Stable Li-Metal Batteries

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

Boosting lithium-ion transport capability of LAGP/PPO composite solid electrolyte via component regulation from ‘Ceramics-in-Polymer’ to ‘Polymer-in-Ceramics'

Synergistic Approach toward Developing Highly Compatible Garnet‐Liquid Electrolyte Interphase in Hybrid Solid‐State Lithium‐Metal Batteries

Unraveling the Synergistic Coupling Mechanism of Li + Transport in an “Ionogel‐in‐Ceramic” Hybrid Solid Electrolyte for Rechargeable Lithium Metal Battery

Metal–Organic Framework-Supported Poly(ethylene oxide) Composite Gel Polymer Electrolytes for High-Performance Lithium/Sodium Metal Batteries

Mechanochemical Synthesis of PEDOT:PSS Hydrogels for Aqueous Formulation of Li-Ion Battery Electrodes

Agglomeration-Free Composite Solid Electrolyte and Enhanced Cathode-Electrolyte Interphase Kinetics for All-Solid-State Lithium Metal Batteries