Abstract:Background: African houses are frequently too hot and uncomfortable to use a bed net at night. Indoor thermal comfort is often evaluated by measuring temperature and humidity, ignoring ventilation. This study explored ways to measure ventilation in single-roomed rural Gambian houses during the malaria transmission season and evaluated building designs that could increase airflow at night and help keep the occupants comfortable. Methods: Two identical mud-walled houses were constructed with a metal roof, three doors and closed eaves. Experiment 1 compared five methods for measuring ventilation in a building: (1) using a blower door, (2) increasing carbon dioxide (CO2) levels indoors using an artificial source of CO2 and then measuring the rate of gas decay, (3) using a similar approach with a natural source of CO2, (4) measuring the rise of CO2 when people enter a building and (5) using hot-wire anemometers. Experiment 2 used CO2 data loggers to compare ventilation in a reference metal-roofed house with closed eaves and badly-fitting doors with a similar house with (1) thatched roof and open eaves, (2) eaves tubes, (3) screened doors and (4) screened doors and windows. Results: In experiment 1, CO2 data loggers placed indoors in two identical houses showed similar changes in airflow (p > 0.05) for all three methods recording either decreasing or increasing CO2. Blower doors were unable to measure airflow in houses with open eaves or screened windows and the anemometers broke down under field conditions. In experiment 2, open eaves in thatched houses, screened doors alone, and screened doors and windows increased indoor ventilation compared to the reference metal-roofed house with closed eaves and badly fitting doors (p < 0.05). Eaves tubes did not increase ventilation in comparison to the reference house. Conclusion: CO2 data loggers proved to be a simple and efficient method for measuring ventilation in rural houses at night. Ventilation of metal-roofed houses can be improved by adding two screened doors and windows on opposite walls. Improved ventilation will result in increased thermal comfort making it more likely that people will sleep under a bed net.

Experimental Study of Envelope Airtightness in New Egyptian Residential Dwellings

Experimental Assessment of Different Sealing Methods for Windows to Improve Building Airtightness in UAE Residential Buildings

Airtightness evaluation of Canadian dwellings and influencing factors based on measured data and predictive models

Improving Energy Efficiency performance utilizing building envelope design in High standard housing in Egypt

EFFECT OF DIFFERENT WINDOWS’ GLAZING TYPES ON ENERGY CONSUMPTION OF A RESIDENTIAL BUILDING IN A HOT-ARID CLIMATE “Case Study: Residential Building in New Cairo City”

Airtightness Analysis of the Built Heritage–Field Measurements of Nineteenth Century Buildings through Blower Door Tests

Building envelope optimization technique to increase energy efficiency of office building in Egypt

Improving Energy Efficiency of Buildings Through Applying Glass Fiber Reinforced Concrete in Building's Envelopes Cladding Case Study of Residential Building in Cairo, Egypt

The Impacts of Air Leakage Paths and Airtightness Levels on Air Change Rates

Airtightness and energy impact of air infiltration in residential buildings in Spain

Towards an Adaptation of Efficient Passive Design for Thermal Comfort Buildings

Residential buildings airtightness frameworks: A review on the main databases and setups in Europe and North America

Field Measurement and Numerical Simulation of Air Infiltration from Entrances in an Airport in Winter

Measuring ventilation in different typologies of rural Gambian houses: a pilot experimental study

Development and experimental evaluation of new building air leakage measurement methods: measurement of interior air leaks and comparison to conventional methods

Passive Building Energy Saving: Building Envelope Retrofitting Measures to Reduce Cooling Requirements for a Residential Building in an Arid Climate

Experimental exploration on airtightness performance of residential buildings in the hot summer and cold winter zone in China

Towards healthy and energy-efficient buildings in the context of Egypt: Modelling demand-controlled ventilation to improve the indoor air quality in a generic office space in Cairo

Exploring building’s envelope thermal behavior of the neo-vernacular residential architecture in a hot and dry climate region of Algeria

Performance and Economical Analysis of Different Insulating Materials Used to Reduce the Heat Load of an Existing Residential Building

Numerical and experimental investigations of the impacts of window parameters on indoor natural ventilation in a residential building