Abstract:To cope with sophisticated application scenarios, carbon materials can provide opportunities for integrating multi-functionalities into superior electromagnetic interference (EMI) shielding properties. Nevertheless, carbon materials usually possess high electrical conductivity, which allows them to counteract electromagnetic waves by reflection. Moreover, the identification of factors that dominate the shielding mechanisms has typically been result-oriented, leading to a reliance on a trial-and-error approach for the development of shielding materials. Thus, it is crucial to identify the dominant factors for EMI shielding and elucidate the mechanism underlying the coordination of the balance between reflection and absorption in carbon materials. In this study, we developed a promising and viable approach to create Co@CNTs embedded in carbonized wood (CW) via chemical vapor deposition, producing Co@CNTs/CW foams. The CNTs, densely grown on the CW surface, tightly encapsulated the Co nanoparticles within them. By manipulating the Co content, the defect density and CNT length varied within the Co@CNTs. Through first-principles calculations, these variations substantially influenced the work function, charge density, and dipole moment of the Co@CNTs. Thus, defect-induced and interfacial polarizations were improved, inducing a transformation of the shielding mechanism from reflection to absorption. Regarding the Co@CNTs/CW foams, while high conductivity was essential for achieving satisfactory shielding performance, the enhanced polarization loss dominated the contribution of absorption to the overall shielding effectiveness. Taking advantage of the enhanced polarizations, the Co@CNTs/CW foams exhibited an impressive shielding effectiveness of 42.0 dB, along with an absorptivity of 0.64, which were instrumental in effectively minimizing secondary reflections. Remarkably, these as-prepared foams possessed outstanding hydrophobicity and Joule heating features with a water contact angle of 138° and a saturation temperature of 85.5 °C (2.5 V). Through the stimulation of voltage-driven Joule heating, the absorptivity of Co@CNTs/CW foams can be significantly enhanced to a range of 0.61 to 0.73, irrespective of the Co content. This research would provide a new avenue for designing carbon materials with an absorption-dominated mechanism integrated into EMI shielding performance.

High Value Utilization of Waste Wood toward Porous and Lightweight Carbon Monolith with EMI Shielding, Heat Insulation and Mechanical Properties

Wood plastic composites: Using carbon fiber to create electromagnetic shielding effectiveness

Ultrathin Wood‐Derived Conductive Carbon Composite Film for Electromagnetic Shielding and Electric Heating Management

Stiff, Thermally Stable and Highly Anisotropic Wood-Derived Carbon Composite Monoliths for Electromagnetic Interference Shielding

MOF@wood Derived Ultrathin Carbon Composite Film for Electromagnetic Interference Shielding with Effective Absorption and Electrothermal Management

Nickel-Fe 3 O 4 @Graphene coated lightweight carbonized wood for efficient electromagnetic interference shielding

Wood biomass-derived carbon for high-performance electromagnetic wave absorbing and shielding

High-conductivity nickel shells encapsulated wood-derived porous carbon for improved electromagnetic interference shielding

High-Performance Joule Heating and Electromagnetic Shielding Properties of Anisotropic Carbon Scaffolds

Conductive Wood for High-Performance Structural Electromagnetic Interference Shielding

Nickel-coated wood-derived porous carbon (Ni/WPC) for efficient electromagnetic interference shielding

Ultra-light MXene aerogel/wood-derived porous carbon composites with wall-like "mortar/brick" structures for electromagnetic interference shielding

Enhanced polarization via Joule heating in wood-derived carbon materials for absorption-dominated EMI shielding

Wood-Derived Porous Carbon/Iron Oxide Nanoparticle Composites for Enhanced Electromagnetic Interference Shielding

Semi-transparent Biomass-Derived Macroscopic Carbon Grids for Efficient and Tunable Electromagnetic Shielding

Biomass-derived fire-retardant porous carbon towards efficient electromagnetic wave absorption and shielding

Fabrication and Characterization of Waste Wood Cellulose Fiber/Graphene Nanoplatelet Carbon Papers for Application as Electromagnetic Interference Shielding Materials

Lightweight and Hydrophobic Three-Dimensional Wood-Derived Anisotropic Magnetic Porous Carbon for Highly Efficient Electromagnetic Interference Shielding

Carbon black enhanced wood-plastic composites for high-performance electromagnetic interference shielding

Ultrathin Carbon Foams for Effective Electromagnetic Interference Shielding

In situ construction of biomass derived 3D carbon framework for efficient electromagnetic interference shielding and Joule heating performance