Abstract:Li-metal batteries have the potential to become the next generation of batteries since they can provide an increased energy density vs. Li-ion batteries. However, the safety issue caused by the inhomogeneous Li deposition and Li dendrite growth greatly limits their commercial application. Several methods have been proposed to address this issue. On the one hand, when Li ions are released from one electrode and consumed at the other electrode, it causes a salt concentration gradient. Besides, the electrical migration of anions in the opposite direction aggravates the concentration of gradient since anions do not react at the electrodes. Fast dendritic growth then occurs when the current is high enough to fully deplete the Li+ ion at the anode during charge. Thus, suppressing concentration gradient by immobilizing the anions would in principle solve the fast dendritic growth issue. On the other hand, the Solid Electrolyte Interphase (SEI) plays a crucial role in the operation of Li metal batteries since it prevents further reduction and continuous electrolyte reaction. SEI derives from the passivation layer formed onto the surface of Li metal under dry air during lithium foil extrusion and then evolves further in contact with the electrolytes and during subsequent electrochemical Li stripping/plating. The SEI is inhomogeneous and since it contains lower resistance pathways for Li+ transport, it favors inhomogeneous deposition at any current. Thus, SEI engineering, in order to favor the homogeneity of current density and enhanced mechanical properties to confine lithium could, in principle, improve the performance of Li metal batteries. Thus, we studied the use of single-ion conducting polymers with high cationic transference numbers (tLi + close to 1) as artificial SEIs (art-SEIs) since they include immobile anions and thus prevent Li+ depletion during charge and, at the same time, improve lithium metal confinement and the homogeneity of current density. Our results show much improved homogeneity of Li deposition and cycling stability after single-ion art-SEI coating using an ether-based liquid electrolyte combined with a separator. Nevertheless, it could not enable long-term cycling as the separator does not enable homogeneous pressure and current density onto the lithium anode. Thus, the use of a single-ion conducting solid polymer electrolyte was combined with a single-ion conducting art-SEI (as illustrated in Figure 1). This strategy allows the suppression of salt concentration gradients, inhomogeneous pressure and current density, thus enables homogeneous Li deposition and long-term cycling of Li metal anode. Figure 1

Dynamic Ion Sieve as the Buffer Layer for Regulating Li+ Flow in Lithium Metal Batteries

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Regulating Li‐ion Flux Through a Dense Yet Highly Ionic Conductive Interlayer for Stable Li Deposition

In Situ Formed Continuous and Dense Inorganic Borate‐Based SEI for High‐Performance Li‐Metal Batteries

Electrolyte and interphase engineering through solvation structure regulation for stable lithium metal batteries

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

A polythiourea protective layer for stable lithium metal anodes

Electro‐Chemo‐Mechanical Design of Buffer Layer Enhances Electrochemical Performance of All‐Solid‐State Lithium Batteries

Achieving multi-dimensional Li + transport nanochannels via spatial-partitioning in crystalline ionic covalent organic frameworks for highly stable lithium metal anode

Highly concentrated dual-anion electrolyte for non-flammable high-voltage Li-metal batteries

Engineering a Dynamic Solvent-Phobic Liquid Electrolyte Interphase for Long-Life Lithium Metal Batteries

Inorganic Filler Enhanced Formation of Stable Inorganic‐Rich Solid Electrolyte Interphase for High Performance Lithium Metal Batteries

Ultra‐tough Dynamic Supramolecular Ion‐conducting Elastomer Induced Uniform Li+ Transport and Stabilizes Interphase Ensures Dendrite‐free Lithium Metal Anodes

In Situ Construction of a LiF/LiCl-Rich Solid Electrolyte Interphase for Lithium Ion Unimpeded Transport

In situ Triggered Rich‐LiF/Mg Multifunctional Passivation Layer for Modifying the Anode Interface of All‐Solid‐State Lithium Metal Batteries

Tuning the Nucleophilicity of Anion in Lithium Salt to Enable an Anion‐Rich Solvation Sheath for Stable Lithium Metal Batteries

Constructing a Lithiophilic and Mixed Conductive Interphase Layer in Electrolyte with Dual-Anion Solvation Sheath for Stable Lithium Metal Anode

Stable interfaces constructed by concentrated ether electrolytes to render robust lithium metal batteries

Anion-derived solid electrolyte interphase realized in usual-concentration electrolyte for Li metal batteries

Artificial SEI Layer Combined with Single-Ion Polymer Electrolytes to Prevent Dendrite Growth in Lithium Metal Batteries