Abstract:Objectives:The objective of this study is to investigate characteristics about removal of dissolved organic matter (DOM) and its fraction for improving operation efficiency in an advanced water treatment plant. Methods:The monitoring of water quality was conducted at five processes such as raw water, pre-oxidation, after sedimentation, post-ozonation, after biological activated carbon (BAC) from July 2020 to August 2021 in advanced water treatment process (AWTP) supplying 180,000m 3 /day. The concentration of DOC (dissolved organic carbon) and number of algae were monitored and LC-OCD was used to fractionate DOC to four species, biopolymer (BP), humic substance (HS), building blocks (BB), and low molecular weights (LMWs). Results and Discussion:The characteristics of raw water showed that the concentration of DOC and the number of algae increased with an increase in water temperature. The portion of BP and HS significantly increased at low and high water temperature, respectively, while BB and LMWs maintained the similar portion. The removal efficiency of DOC in the AWTP was achieved at 59% with each species of BP, HS, BB, and LMWs obtaining removal efficiency of 87%, 65%, 26%, and 52%, respectively. Coagulation/sedimentation/filtration showed removal efficiency of 84%, 56%, 20%, and 18% for BP, HS, BB, and LMWs, respectively, corresponding to their molecular weight. The effect of post-ozonation would be negligible except for BP. In BAC, removal efficiency of 49% and 12% were obtained for LMWs and BB (low molecular weight, respectively. As a result, the BP portion significantly decreased due to high removal efficiency, while BB portion was increased in the final treated water compared to raw water. Conclusion:Most of DOM was removed in coagulation/sedimentation/filtration and BAC, whereas oxidation process such as pre-chlorination, pre-ozonation and post-oxidation did not have an effect on DOM removal. In coagulation/sedimentation/filtration, 84% and 54% of the BP and HS were removed, while BAC removed 49% and 12% of LMWs and BB, respectively. It has been recommended to improve the removal efficiency of BB, which obtained the lowest removal efficiency in AWTP, and to enhance the removal efficiency of LMWs in BAC to inhibit microbial regrowth in the distribution system.

A new process to further remove dissolved organic matter and disinfection by-product formation potential during drinking water treatment

Unraveling Dissolved Organic Matter in Drinking Water Through Integrated Ozonation/ceramic Membrane and Biological Activated Carbon Process Using FT-ICR MS.

Comparison of O3 - BAC Combination and Conventional Processes on Removal of Pollutants for Treating Drinking Water

[Effect of Ozonation on Microorganism in the Biological Activated Carbon and Disinfection By-Products in the Effluent].

Characterization of DOM and disinfection by-products precursors in biological activated carbon filter backwash water from drinking water treatments

Removal of Soluble Microbial Products As the Precursors of Disinfection By-Products in Drinking Water Supplies.

Dissolved Organic Matter Fractions and Their Removal in Full-Scale Drinking Water Treatment Process

Effects of dissolved organic matter removal and molecular transformation in different water treatment processes on formation of disinfection byproducts

Removal of Organic Matter and Disinfection By-Products Precursors in a Hybrid Process Combining Ozonation with Ceramic Membrane Ultrafiltration

Research about Organic Matter Removal and Biofilms Development of Pilot-Scale UV/H2O2-BAC Process

Removal of disinfection byproduct precursors and reduction in additive toxicity of chlorinated and chloraminated waters by ozonation and up-flow biological activated carbon process

Comparison of O3-BAC, UV/H2O2-BAC, and O3/H2O2-BAC treatments for limiting the formation of disinfection byproducts during drinking water treatment in India

Evaluating the Biosafety of Conventional and O3-BAC Process and Its Relationship with NOM Characteristics.

Contribution of extracellular polymeric substances and microbial community on the safety of drinking water quality: By mean of Cu/activated carbon biofiltration

The Removal of Organic Precursors of DBPs During Three Advanced Water Treatment Processes Including Ultrafiltration, Biofiltration, and Ozonation

Organic micropollutants and disinfection byproducts removal from drinking water using concurrent anion exchange and chlorination process

Identification of key precursors contributing to the formation of CX3R-type disinfection by-products along the typical full-scale drinking water treatment processes

Effect of micropollutants on disinfection byproducts and antibiotic resistance genes in drinking water in the process of biological activated carbon treatment

Removal performance of dissolved organic matter from municipal secondary effluent by different advanced treatment processes and preventing the formation of disinfection by-products

Control of disinfection byproducts in drinking water treatment plants: Insight into activated carbon filter

Molecular characterization of DOM: A full-scale case study of an advanced DWTP from Jintan, China