Abstract:Bipolar membranes (BPMs), i.e, laminates cationic and anionic polymer membranes, have a wide range of applications. Starting from an early application in electrodialysis systems, the application scope has more recently broaden to electrochemical energy conversion systems such as water electrolyzer and CO 2 reduction reaction, fuel cells and flow batteries. 1 In connection to CO 2 reduction reaction, the implementation of BPM effectively mitigates CO 2 crossover driven by (bi)carbonate migrations, but the rate capability is limited by the large overpotential across current state-of-the-art BPMs. 2 The large overpotential primarily originates from the slow water dissociation (WD) kinetics at the interface between the cation exchange layer (CEL) and anion exchange layer (AEL), and largely depends on junction morphology. The detailed structure-properties relationships remain poorly understood, but physical properties of individual polymeric membranes and the composition and morphology of the WD catalyst are important parameters and the optimal combination of materials may be different for different systems. Furthermore, the WD performance of BPM in MEA water electrolyzer not only depends on BPM’s junction contact, but also the interface contact between electrodes and CEL/AEL. In this work, a series of BPM system featuring different compositions of membrane layers and WD catalysts are explored and characterized by polarization behaviour (J-V curve) via H-cell and MEA water electrolyzer. We attempt to link the junction composition created by different BPM systems to its WD performance and provide a systematic choice of CEL/AEL and WD catalyst in the BPM system. (1) Blommaert, M. A.; Aili, D.; Tufa, R. A.; Li, Q.; Smith, W. A.; Vermaas, D. A. Insights and Challenges for Applying Bipolar Membranes in Advanced Electrochemical Energy Systems. ACS Energy Lett. 2021 , 2539–2548. https://doi.org/10.1021/acsenergylett.1c00618. (2) Garg, S.; Giron Rodriguez, C. A.; Rufford, T. E.; Varcoe, J. R.; Seger, B. How Membrane Characteristics Influence the Performance of CO 2 and CO Electrolysis. Energy Environ. Sci. 2022 . https://doi.org/10.1039/D2EE01818G.

Bipolar membrane polarization behavior with systematically varied interfacial areas in the junction region

Bipolar Membranes Via Divergent Synthesis: On the Interplay between Ion Exchange Capacity and Water Dissociation Catalysis

Composition and Structure Progress of the Catalytic Interface Layer for Bipolar Membrane

The Effect of Junction Composition of Polarization Behaviour of Bipolar Membranes

Tailoring High-Performance Bipolar Membrane for Durable Pure Water Electrolysis.

Poly(arylene ether ketone)-based bipolar membranes for acid–alkaline water electrolysis applications

Water dissociation phenomena in a bipolar membrane

Modeling Water Electrolysis in Bipolar Membranes

PEG-catalytic water splitting in the interface of a bipolar membrane.

Catalytic Water Dissociation Using Hyperbranched Aliphatic Polyester (boltorn® Series) As the Interface of a Bipolar Membrane

Water Dissociation Phenomena on A Bipolar Membrane - Current-Voltage Curve in Relation with Ionic Transport and Limiting Current Density

Separation of Polymeric Charge Enables Efficient Bipolar Membrane Operation

Bipolar Membranes With Controlled, Microscale 3D Junctions Enhance the Rates of Water Dissociation and Formation

Preparation of Bipolar Membranes. II

Fundamental Studies on a Novel Series of Bipolar Membranes Prepared from Poly(2,6-Dimethyl-1,4-phenylene Oxide) (PPO)

Modeling the electrochemical behavior and interfacial junction profiles of bipolar membranes at solar flux relevant operating current densities

Preparation of Bipolar Membranes by Electrospinning

Visualizing the Zero-Potential Line of Bipolar Electrodes with Arbitrary Geometry.

(Invited) Molecular Insights into Water Structure and Proton Transfer at the Interfaces in Bipolar AEM/PEM Membranes

Interfacial Water Polarization: A Critical Force for Graphene-based Electrochemical Interfaces

Tuning the Interfacial Electrical Field of Bipolar Membranes with Temperature and Electrolyte Concentration for Enhanced Water Dissociation