Abstract:The study reported a novel L1 2 -strengthening NiCoCrAlTi high-entropy alloy (HEA) with an outstanding synergy of tensile strength and ductility at both ambient and high temperatures. The HEA was prepared by arc melting and cold-rolling, followed by isothermal aging at designed precipitation temperatures to achieve coexistence of recrystallized and non-recrystallized grains. Transmission electron microscopy (TEM) characterization revealed a high density of rod-like and spheroidal L1 2 precipitates distributing in the micro/nanograins and non-recrystallized regions in the annealed specimens. The yield stress, ultimate tensile stress, and ductility of the HEA were ∼1300 MPa, 1610 MPa, and 14 % at room temperature, respectively. Such excellent mechanical properties of ∼1060 MPa, 1271 MPa, and 25 % were maintained to 600 °C, which was superior to most reported HEAs and Co- and Ni-based superalloys to date. Systematic TEM analysis unveiled at low strain, the deformation mechanism was mainly controlled by dislocations and stacking faults (SFs). With the increase in strain, the deformation mode gradually transferred to dislocations, deformation twins (DTs), and SFs. Moreover, the complex interaction between SFs and L1 2 precipitates, including the shearing and blocking effects, was frequently observed, contributing to the high tensile strength. Thus, the extremely high tensile strength and sustained ductility at 600 °C mainly originate from the cooperation among interaction between L1 2 precipitation and dislocations and extensive SFs, DTs, immobile Lomer-Cottrell (L-C) locks formed from interactions between SFs and SFs/DTs, hierarchical SFs/DTs networks, as well as hetero-deformation-induced strengthening. Such a unique deformation mechanism breaks the strength-ductility trade-off of the HEA at high temperatures.

Super cold‐drawing ability and high tensile strength of Fe35Ni35Cr20Mn10 high‐entropy alloy wires

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Microstructure and Properties of Cold Drawing Cu-2.5% Fe-0.2% Cr and Cu-6% Fe Alloys

Impact tension behavior of heavy-drawn nanocrystalline CoCrNi medium entropy alloy wire

Nanotwinning and Tensile Behavior in Cold-Welded High-Entropy-alloy Nanowires

Strong and ductile CoCrFeNi high-entropy alloy microfibers at ambient and cryogenic temperatures

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing

Development of a large size FCC high-entropy alloy with excellent mechanical properties

Twinning and 9R Phase Transition Mediated Extraordinary Cold-drawn Deformability in NiCoCrFeMo High-Entropy Alloy

Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins bundles structure prepared by cryo-rolling

Yield strength-ductility trade-off breakthrough in Co-free Fe40Mn10Cr25Ni25 high-entropy alloys with partial recrystallization

Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing

Magnificent tensile strength and ductility synergy in a NiCoCrAlTi high-entropy alloy at elevated temperature

Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy

Production of Al-Based Amorphous Alloy Wires with High Tensile Strength by a Melt Extraction Method

Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): Microstructure and mechanical properties

Strength and ductility dual-enhancement of Ni36Co30Fe11Cr11Al6Ti5Nb1 high entropy alloy by directional solidification

Achieving superior strength-ductility balance of Co–Cr–Fe–Ni high entropy alloy via annealing

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy