Abstract:Fatigue indicator parameters (FIPs) serve as the measurement of the driving force for fatigue crack initiation (FCI). The extreme value distributions of FIPs for fatigue life scatter (i.e., fatigue crack initiated from surface or subsurface) in the high cycle fatigue (HCF) to very high cycle fatigue (VHCF) regime are computed of AA7075-T6. The FIPs are averaged in the volume of sub-band in the scale of sub-grain proposed based on the concept of slip system of AA7075-T6 where sub-bands are extracted from statistical volume elements (SVEs) using open-source called Dream-3D. SVEs are built via the experimental crystalline microstructure. The material response variables required in the computation of FIPs are obtained by embedding crystal plasticity theory to the crystal plasticity finite element model via open-source software PRISMS-Fatigue. To meet statistical requirements, 50 instantiations of SVEs are modeled for both traction-free and fully periodic boundary conditions, respectively, corresponding to the surface and subsurface cases under different strain amplitudes (i.e., 0.362%, 0.312%, 0.289%, and 0.254%). It is found that the FIPs are higher under high stress levels indicating that fatigue crack tends to initiate at high stress levels. In addition, the low driving force can be found in the simulations with fully periodic boundary conditions throughout the SVEs, whereas the higher FIPs under traction-free boundary conditions tend to form close to the free surface under cyclic loading conditions. Furthermore, the highest FIPs have a propensity to scatter along with the depth of SVEs with the traction-free surface under strain amplitude of 0.254%, which means the fatigue life in the VHCF regime has a higher scatter. The interactions between the high symmetry of FCC crystalline structure and free surface combining the loading amplitudes have a compound effect on the FIPs, especially at low stress amplitudes, which also has a greater impact on the ultra-high-cycle fatigue life. To this end, the VHCF and HCF experiments are performed under an ultrasonic fatigue experimental system with a frequency of 20 kHz with different stress levels corresponding to the strain amplitude in the simulations. Besides, the morphology fracture surface of presentative samples was observed via the scanning electron microscope (SEM). The comparison between the simulation and the experimental results indicates that the EVD of FIPs is efficient in preciously predicting the FCI and well explain the fatigue life scatter of the AA7075-T6 in the HCF to VHCF regime.

Experimental and computational investigation of weathering steel Q450NQR1 under high cycle fatigue loading via crystal plasticity finite element method

Low Cycle Fatigue Properties and Fracture Mechanism of Q345qC Steel and Its Welded Joint

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Microstructure evolution and crack initiation behavior of Q450NQR1 high-strength weathering steel in very high cycle fatigue regime

Influence of Non-Metallic Inclusions on Very High-Cycle Fatigue Performance of High-Strength Steels and Interpretation via Crystal Plasticity Finite Element Method

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

Fatigue Behavior of Cracked High-Strength Steel Plates Strengthened by CFRP Sheets

Study on fatigue temperature evolution and failure behavior of Q460 steel

Investigation of the Fatigue Life Scatter for AA7075-T6 Using Crystal Plasticity Finite Element Method in the High to Very High Cycle Fatigue Regime

Fractographic Analysis and Particle Filter-Based Fatigue Crack Propagation Prediction of Q550E High-Strength Steel

EXPERIMENTAL INVESTIGATION ON FATIGUE PROPERTIES OF Q345QD AND ITS FATIGUE FRACTURE MECHANISM

Experimental investigation and crystal plasticity simulation for the fatigue crack initiation of the equiaxed Ti-6Al-4V alloy in the very high cycle regime

Crystal plasticity modeling fatigue behavior in bimodal Ti–6Al–4V: Effects of microdefect and lamellar orientation

Experimental and Numerical Study of Combined High and Low Cycle Fatigue Performance of Low Alloy Steel and Engineering Application

Crystal plasticity modeling of grain boundary softening and fatigue in U75V pearlite steel under low strain conditions: A study of cyclic rolling contact fatigue

Finite Element Analysis for the Fatigue Behavior of Steel Plates Strengthened with CFRP Plates

Fatigue life modeling for a low alloy steel after long-term thermal aging

Life prediction and damage analysis of creep-fatigue combined with high-low cycle loading by using a crystal plasticity-based approach

Fatigue Life Prediction of Film-cooling Hole Specimens with Initial Damage

STUDY ON FATIGUE BEHAVIOR OF CRACKED TENSILE STEEL PLATES REINFORCED WITH CFRP PLATES