Abstract:Polymer composites are a class of material that are gaining a lot of attention in demanding tribological applications due to the ability of manipulating their performance by changing various factors, such as processing parameters, types of fillers, and operational parameters. Hence, a number of samples under different conditions need to be repeatedly produced and tested in order to satisfy the requirements of an application. However, with the advent of a new field of triboinformatics, which is a scientific discipline involving computer technology to collect, store, analyze, and evaluate tribological properties, we presently have access to a variety of high-end tools, such as various machine learning (ML) techniques, which can significantly aid in efficiently gauging the polymer's characteristics without the need to invest time and money in a physical experimentation. The development of an accurate model specifically for predicting the properties of the composite would not only cheapen the process of product testing, but also bolster the production rates of a very strong polymer combination. Hence, in the current study, the performance of five different machine learning (ML) techniques is evaluated for accurately predicting the tribological properties of ultrahigh molecular-weight polyethylene (UHMWPE) polymer composites reinforced with silicon carbide (SiC) nanoparticles. Three input parameters, namely, the applied pressure, holding time, and the concentration of SiCs, are considered with the specific wear rate (SWR) and coefficient of friction (COF) as the two output parameters. The five techniques used are support vector machines (SVMs), decision trees (DTs), random forests (RFs), k-nearest neighbors (KNNs), and artificial neural networks (ANNs). Three evaluation statistical metrics, namely, the coefficient of determination (R2-value), mean absolute error (MAE), and root mean square error (RMSE), are used to evaluate and compare the performances of the different ML techniques. Based upon the experimental dataset, the SVM technique was observed to yield the lowest error rates-with the RMSE being 2.09 × 10-4 and MAE being 2 × 10-4 for COF and for SWR, an RMSE of 2 × 10-4 and MAE of 1.6 × 10-4 were obtained-and highest R2-values of 0.9999 for COF and 0.9998 for SWR. The observed performance metrics shows the SVM as the most reliable technique in predicting the tribological properties-with an accuracy of 99.99% for COF and 99.98% for SWR-of the polymer composites.

Tribo-informatics evaluation of dry sliding friction of silanized jute filler reinforced epoxy composites using machine learning techniques

Physical, mechanical and dry sliding wear properties of non-woven viscose fabric epoxy-based polymer composites: An optimization study

Tribo-informatics approach to predict wear and friction coefficient of Mg/Si 3 N 4 composites using machine learning techniques

Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites

Prediction of Tribological Properties of UHMWPE/SiC Polymer Composites Using Machine Learning Techniques

Investigation of mechanical and tribological performance of wood dust reinforced epoxy composite under dry, wet and heated contact condition

Experimental evaluation of physicomechanical, tribological and optimality circumstances for Corchorus olitorius particle‐based composites

Wear and Frictional Performance of Epoxy Composites Reinforced with Natural Waste Fibers and Fillers for Engineering Applications

Triboinformatics Approach for Friction and Wear Prediction of Al-Graphite Composites Using Machine Learning Methods

Optimization and Prediction of Wear Characteristics of Khas Khas Grass/Mesquite Bark Powder/Banana Fiber-Reinforced Epoxy Green Hybrid Composites Using Taguchi Technique

Optimized machine learning with hyperparameter tuning and response surface methodology for predicting tribological performance in bio‐composite materials

Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material

Plain-Woven Areca Sheath Fiber-Reinforced Epoxy Composites: The Influence of the Fiber Fraction on Physical and Mechanical Features and Responses of the Tribo System and Machine Learning Modeling

Impact of different parameters in tribological properties of enset ventricosum/ terminalia arjuna fibers /SiO 2 filler incorporation

Study on Dry Sliding Wear and Friction Behaviour of Al7068/Si3N4/BN Hybrid Composites

Insight to the influence of alkali treatment on mechanical and tribological properties of a novel carbon/jute hybrid porcine filled polyester composite

Analysis and prediction of erosion behavior of epoxy composites using statistical and machine learning techniques

Tribological Behavior of Hybrid PTFE/Kevlar Fabric Composites with Different Weave Densities

A Comparative Analysis of the Tribological Performance of Coir, Bamboo and Wood Filler Reinforced Polymer Composites

Modeling and prediction of tribological properties of copper/aluminum-graphite self-lubricating composites using machine learning algorithms