Abstract:Based on the demand for monitoring conductivity, temperature and depth (CTD) in the ocean, a cascaded-coated long-period fiber grating and fiber Bragg grating structure (LPG–FBG) is proposed, which could eliminate the mutual interference of CTD in the measurement. Firstly, according to the coupled mode theory and phase matching conditions, the coupling equation of each segment of grating is deduced. Next, through the difference iterative method, the total transfer matrix of cascaded LPG–FBG is obtained. Then, to improve the sensitivity of the sensor and make the demodulation more accurate and convenient, the structure of the grating is optimized. On the basis of the above, the transmission spectrum of the structure is simulated and three peaks formed by coupling the forward core mode with the forward cladding mode in LPG ( ), the backward cladding mode in FBG ( ) and the backward core mode in FBG ( ) are investigated. Furthermore, the sensing characteristics of surrounding refractive index (SRI), temperature and pressure of the peaks are analyzed, and the three peaks show different sensitivity to marine environmental parameters. Therefore, a three-parameter matrix equation is established, and the three parameters can be measured simultaneously without interference. Simulation results indicated that the transmittances of all transmission peaks are lower than 0.5, the full width at half maxima of all transmission peaks is less than 7 nm, and the linearity of the three transmission peaks to three parameters is larger than 0.999. The maximum sensitivities of three transmission peaks to SRI, temperature and water pressure are − 440 nm/RIU, − 1375.67 pm/°C and − 10.87 nm/Mpa, respectively. Compared with the other three-parameter sensors used in ocean, the proposed cascaded-coated LPG–FBG structure has simple structure, high sensitivity and good linearity, which makes this structure have great application potential in the fields of multiparameter sensing and segmented sensing in marine environment.

Design and simulation of a cascaded-coated LPG–FBG sensor structure for simultaneous monitoring of CTD in ocean

Integrated and compact fiber-optic conductivity-temperature-depth (CTD) sensor for marine detection

Multiparameter Sensor Based on Cascaded Micro-Tapered Long-Period Fiber Gratings

Three-parameter high-precision sensor based on superimposed cladding-reduced coated long-period fiber grating and fiber Bragg grating

High-sensitivity sensor design based on cascaded long-period fiber grating with film coating

Fiber Bragg grating temperature sensor for marine application

A High Spatial Resolution FBG Sensor Array for Measuring Ocean Temperature and Depth

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

All-silica fiber-optic temperature-depth-salinity sensor based on cascaded EFPIs and FBG for deep sea exploration

Multi-parameter sensor based on cascaded multicore FBGs and an FPI for bending, temperature and pressure measurements

Dual-Parameter Fiber Sensors for Salinity and Temperature Measurement Based on a Tapered PMF Incorporated With an FBG in Sagnac Loop

Ultra-sensitive seawater temperature sensor using an FBG-cascaded microfiber MZI operating at dispersion turning point

A Multiparameter Sensor Based on Dumbbell-Shaped Double-Cladding Fiber Structure Cascaded Long Period Fiber Grating

Simultaneous Measurement of Seawater Temperature and Depth Using Polarization-Maintaining Fiber Bragg Grating and Extrinsic Fabry-Perot Interferometer

High-Sensitivity Salinity Sensor Based on Helical Long-Period Fiber Grating in Thin-cladding Fiber

Potential Multiparameter Sensor Based on Thin-Cladding Fiber Helical Long-Period Fiber Gratings

Implementation and Characterization of Liquid-Level Sensor Based on a Long-Period Fiber Grating Mach–Zehnder Interferometer

A Novel Fast Response and High Precision Water Temperature Sensor Based on Fiber Bragg Grating

Highly Localized Point-by-Point Fiber Bragg Grating for Multi-Parameter Measurement