Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

3D printing of fully recyclable continuous fiber self-reinforced composites utilizing supercooled polymer melts

Interfacial Transcrystallization and Mechanical Performance of 3D-Printed Fully Recyclable Continuous Fiber Self-Reinforced Composites

Thermal degradation and performance evolution mechanism of fully recyclable 3D printed continuous fiber self-reinforced composites

Research on 3D Printing of Continuous Fiber Self-reinforced Composites and Its Recyclability

Self-monitoring Continuous Carbon Fiber Reinforced Thermoplastic Based on Dual-Material Three-Dimensional Printing Integration Process

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

Recycling and Remanufacturing of 3d Printed Continuous Carbon Fiber Reinforced Pla Composites

Integrated self-monitoring and self-healing continuous carbon fiber reinforced thermoplastic structures using dual-material three-dimensional printing technology

A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites

3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Thermally assisted extrusion-based 3D printing of continuous carbon fiber-reinforced SiC composites

Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites

3D Printing of Continuous Fiber Reinforced Low Melting Point Alloy Matrix Composites: Mechanical Properties and Microstructures

Investigation of a 3D Printing Method for Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composite

Facile preparation, closed-loop recycling of multifunctional carbon fiber reinforced polymer composites

Recent progress of 3D printed continuous fiber reinforced polymer composites based on fused deposition modeling: a review

Novel Designable Strategy and Multi-Scale Analysis of 3D Printed Thermoplastic Fabric Composites

Design and 3D Printing of Continuous Fiber Reinforced Heterogeneous Composites