Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

The Future of Perovskite Photovoltaics—Thermal Evaporation or Solution Processing?

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Vapor Phase Deposition of Perovskite Photovoltaics: Short Track to Commercialization?

Recent progress of perovskite devices fabricated using thermal evaporation method: Perspective and outlook

High-Speed Vapor Transport Deposition of Perovskite Thin Films.

Thermal Evaporation for Halide Perovskite Optoelectronics: Fundamentals, Progress, and Outlook

Applications of vacuum vapor deposition for perovskite solar cells: A progress review

Recent Progress in the Solution-Based Sequential Deposition of Planar Perovskite Solar Cells

Fabrication of Efficient Metal Halide Perovskite Solar Cells by Vacuum Thermal Evaporation: A Progress Review

Perovskite solar cells by vapor deposition based and assisted methods

Vapor-Assisted Crystallization Control Toward High Performance Perovskite Photovoltaics With Over 18% Efficiency In The Ambient Atmosphere

Evaporation Deposition Strategies for All‐Inorganic CsPb(I1–xBrx)3Perovskite Solar Cells: Recent Advances and Perspectives

Loading Precursors into Self‐Assembling Contacts for Improved Performance and Process Control in Evaporated Perovskite Solar Cells

Progress in Emerging Solution-Processed Thin Film Solar Cells – Part II: Perovskite Solar Cells

Combined Vacuum Evaporation and Solution Process for High‐Efficiency Large‐Area Perovskite Solar Cells with Exceptional Reproducibility

Evaporation Deposition Strategies for All‐Inorganic CsPb(I 1– x Br x ) 3 Perovskite Solar Cells: Recent Advances and Perspectives

Vapor-assisted solution process for perovskite materials and solar cells

Single Source Thermal Evaporation of Two-dimensional Perovskite Thin Films for Photovoltaic Applications

A General Approach to High Efficiency Perovskite Solar Cells by Any Antisolvent

A general approach to high-efficiency perovskite solar cells by any antisolvent