Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

Single Source Thermal Evaporation of Two-dimensional Perovskite Thin Films for Photovoltaic Applications

Two-/Three-Dimensional Perovskite Bilayer Thin Films Post-Treated with Solvent Vapor for High-Performance Perovskite Photovoltaics

High-Quality Perovskite CH3NH3PbI3 Thin Films for Solar Cells Prepared by Single-Source Thermal Evaporation Combined with Solvent Treatment

Solvent annealing process for wide bandgap perovskite solar cells

Low Temperature Method-Based Evaporation/spray-Coating Technology for Wide Bandgap Perovskite Solar Cells

Fluorocarbon‐based Solvent‐Bath Annealing for High‐Performance Perovskite Photovoltaics

Accessing Highly Oriented Two-Dimensional Perovskite Films via Solvent-Vapor Annealing for Efficient and Stable Solar Cells

Solvation Effect in Precursor Solution Enables over 16% Efficiency in Thick 2D Perovskite Solar Cells

Thermal Evaporation for Halide Perovskite Optoelectronics: Fundamentals, Progress, and Outlook

Mixed-solvent-vapor Annealing of Perovskite for Photovoltaic Device Efficiency Enhancement

Semitransparent Perovskite Solar Cells with an Evaporated Ultra‐Thin Perovskite Absorber

Chlorobenzene solvent annealing of perovskite thin films for improving efficiency and reproducibility of perovskite solar cells

Improved Crystallization of Perovskite Films by Optimized Solvent Annealing for High Efficiency Solar Cell.

Understanding the Formation and Evolution of Interdiffusion Grown Organolead Halide Perovskite Thin Films by Thermal Annealing

Thermally Evaporated Metal Halide Perovskites and Their Analogues: Film Fabrication, Applications and Beyond

Semitransparent perovskite solar cells with an evaporated ultra-thin perovskite absorber

De-templated crystallization in 2D perovskites for enhanced photovoltaic efficiency

Preparing High-Efficiency Perovskite Solar Cells

te thin fi lms and e ffi cient perovskite solar cells prepared by the hybrid deposition method †

Controllable Blading Interdiffusion of Formamidinium Iodide on Thermal Evaporated Scalable and Conformal Lead Iodide for Efficient Perovskite Solar Cells

Inorganic and lead-free CsBi3I10 thin-film solar cell prepared by single-source thermal evaporation