Abstract:This paper applies the computational fluid dynamics (CFD) simulation to study the condensate two-phase thermofluid characteristics of refrigerant HFO-1234yf flowing through horizontal straight and convergent passages for guiding the design of minitube heat exchangers. The theoretical analysis employs the volume-of-fluid (VOF) method to model the progression of film condensation process for determining the distributions of velocity, pressure, temperature, vapor volume fraction and film thickness for liquid-vapor interfacial flows. The Lee model is formulated as a user defined function to treat the phase change effect at the interface. The predictions of heat transfer coefficients and pressure drops agree reasonably well with the measured data from the referencing literature at the mass and heat fluxes of 200–800 kg/m2 s and 9.9–24.3 kW/m2 for validation of the computational model. The simulated results are presented to capture the complex two-phase flow behaviors during the film condensation progression, including the formation of interfacial ripples of annular films, wave-shaped films with elongated necking regions, shedding of liquid ligaments and breakup of these ligaments entrained into the vapor core. The VOF calculations also estimate the average heat transfer coefficient and pressure drop up to 11.3 kW/m2 K and 55.1 kPa at a mass flux of 800 kg/m2 s for the straight tube, showing similar thermal performance to refrigerant HFC-134a reported by open literature. The convergent passage essentially raises the average heat transfer coefficient and pressure drop because of more severe shear stresses over the film surface. The correlations of heat transfer coefficient and pressure drop are compared with CFD predictions for straight and convergent tubes. The performance assessment is thus conducted using the validated correlations to guide the redesign of minitube heat exchangers with HFO1234yf as an alternative refrigerant in various energy systems. Two design changes are presented using HFO1234yf refrigerant to enlarge the total surface area up to 13.49% in straight tubes or broaden the cooling surface area of only 6.4% in convergent tubes for matching the performance of R134a.

Condensation of R1234yf in a plate heat exchanger with an offset strip fin flow structure for electric vehicle heat pumps

Condensation heat transfer performance of R290 in a plate heat exchanger for electric vehicle heat pumps

Analyses of the thermal and hydraulic characteristics of a perpendicular-flow offset-strip-fin heat exchanger for electric vehicles

Experimental Investigation on Evaporation Heat Transfer and Pressure Drop Characteristics of HFC-161 in a Horizontal Smooth Tube

Experimental Study on Heating Performance of an R1234yf Heat Pump System for Electric Cars

Experimental Study of an Air-Conditioning System in an Electric Vehicle with R1234yf

Study on the refrigerant interchangeability under extreme operating conditions of R1234yf heat pump systems for electric vehicles

Flow Boiling in Dimpled Plate Heat Exchangers with Different Geometric Parameters: Analysis of Asymmetric Channels

Heat transfer and pressure drop of film condensation in a horizontal minitube for HFO1234yf refrigerant

Experimental investigation on the flow boiling of R134a in a plate heat exchanger with mini-wavy corrugations

Transitioning to low GWP refrigerants in automobiles: A numerical simulation study on R1234yf/R152a's heat transfer characteristics in porous microchannels

Exergy analysis of heat pump air conditioning systems for pure electric vehicle use with low-GWP refrigerants

Experimental investigation on frosting performance of a microchannel heat exchanger in heat pump system for electric vehicles

An experimental comparative analysis and machine learning prediction on the evaporation characteristics of R1234yf and R290/R13I1 in a plate heat exchanger

Performance characteristics of an automobile air conditioning system with internal heat exchanger using refrigerant R1234yf

Performance comparison of a direct heat pump using R1234yf and indirect heat pumps using R1234yf and R290 designed for cabin heating of electric vehicles

Condensation heat transfer characteristics of R1234yf and other Refrigerants inside small-scale tube: An experimental study and heat transfer correlation development

Condensation heat and mass transfer characteristics of low GWP zeotropic refrigerant mixture R1234yf/R32 inside a horizontal smooth tube: An experimental study and non-equilibrium film model development

In tube condensation of low global warming potential refrigerants in an axial micro-fin aluminum tube

Superhydrophobic Microchannel Heat Exchanger for Electric Vehicle Heat Pump Performance Enhancement

Research on the Application of an HFO1234yf/HFC134a Mixture in a Vehicle Air-Conditioner System with an Internal Heat Exchanger