Performance comparison of a direct heat pump using R1234yf and indirect heat pumps using R1234yf and R290 designed for cabin heating of electric vehicles
Soonbum Kwon,Dongchan Lee,Jun Yeob Chung,Heegyu Maeng,Yongchan Kim
DOI: https://doi.org/10.1016/j.energy.2024.131311
IF: 9
2024-04-19
Energy
Abstract:When using R290 as an alternative to R1234yf for heat pump (HP) cabin heating systems, indirect system (IDS) should be employed to address safety issues owing to its high flammability. However, studies comparing the performance of a direct system (DS) using R1234yf and an IDS using R290 are limited. In this study, the performance characteristics of DS-HP R1234yf , IDS-HP R1234yf , and IDS-HP R290 were compared to verify the feasibility of applying R290 to cabin heating systems in electric vehicles. Compared with DS-HP R1234yf , the heating capacity (Q HP ) and compressor work (W HP ) of IDS-HP R1234yf decreased by 2.8% and increased by 4.5% on average, respectively, owing to the system configuration effects. Q HP and W HP of IDS-HP R290 increased by 42.1% and 51.0%, respectively, over those of DS-HP R1234yf owing to the refrigerant and system configuration effects. Thus, at −20 °C, COP HP (HP's coefficient of performance) of IDS-HP R290 was 1.8, which was 4.9% higher than that of DS-HP R1234yf , owing to the high decrease rate of W HP . Additionally, considering the use of HP and positive temperature coefficient (PTC) heaters, COP HP + PTC of IDS-HP R290 was 6.7–22.1% higher than that of DS-HP R1234yf owing to its superior Q HP , and the driving range (DR) of IDS-HP R290 was 7.2–20% higher than that of DR PTC .
energy & fuels,thermodynamics