Abstract:As unlimited resources, seawater and sea sand (SS) could be used as alternatives for fresh water and river sand in concrete constructions in areas with limited resources, such as mega‐cities and islands. To further improve the material efficiency, SS have been used to fabricate the ultra‐high‐performance seawater‐sea‐sand concrete (UHPSSC) in the literature. This work proposes a new type of UHPSSC, which incorporates basalt fibers to enhance the tensile property and coarse aggregate (CA) to improve the modulus. To investigate the contributing factors to the mechanical performance, 12 mixes of different fiber lengths, fiber volumes, and CA contents were designed and tested under compression and flexure. To verify the validity of the proposed UHPSSC in structural elements, six beam specimens reinforced with basalt‐fiber‐reinforced polymer (BFRP) bars were designed and tested. The influence of the tensile properties of the proposed UHPSSC and BFRP flexural reinforcement designs was analyzed. This research shows that with a proper mix design, the proposed UHPSSC has a maximum compressive strength of 140 MPa, exceeding the benchmark strength of 120 MPa for ultra‐high‐performance concrete. With different mix designs, the compressive strength of the proposed UHPSSC varies from 101.5 to 140.5 MPa and the flexural strength varies from 10.8 to 15.4 MPa at 28 days. At different curing ages, the basalt fiber length and volume have more significant impacts on the flexural strength but have limited impact on the compressive strength. Although an optimal CA content of 400 kg/m3 was found for the compressive strength and the CA content could amplify the influences of the fiber length and volume on the flexural strength. With the flexural reinforcement ratio varying from 0.58% to 1.29%, the UHPSSC beam specimens failed with expected flexural failure and the ultimate capacities varying from 118 to 183 kN, showing a predictable manner. Improving the tensile strength of the proposed UHPSSC could effectively enhance the cracking load and expand the stiffness degradation phase.

Experimental study on pullout behaviour of basalt fiber-reinforced polymers minibar embedded in ultra-high performance seawater sea-sand concrete

Pull-Out Behavior of CFRP Bars in Glued-In Glubam Joints

Study on the Bonding Performance of BFRP Bars with Seawater Sand Concrete

Fatigue bond behaviour between basalt fibre-reinforced polymer bars and seawater sea-sand concrete

Study on Bond-Slip Behavior between Seawater Sea-Sand Concrete and Carbon Fiber-Reinforced Polymer (CFRP) Bars with Different Surface Shapes

Dynamic bond behaviour of fibre-wrapped basalt fibre-reinforced polymer bars embedded in sea sand and recycled aggregate concrete under high-strain rate pull-out tests

Bond Performance between Fiber-Wrapped Ribbed Basalt Fiber-Reinforced Polymer Bars and Seawater Sea-Sand Concrete

The influence of geometric characteristic on the pullout behavior of basalt FRP minibar embedded in concrete

Experimental Investigation on the Bond Performance of Sea Sand Coral Concrete with FRP Bar Reinforcement for Marine Environments

A Pull-out Equivalent Telescopic Layered Failure Model of Carbon Fiber Bundles in Seawater Sea-Sand Cementitious Matrix

Bond strength of GFRP bars to high strength and ultra-high strength fiber reinforced seawater sea-sand concrete (SSC)

Mechanical performance and structural application of a novel basalt‐fiber‐reinforced ultra‐high‐performance seawater‐sea‐sand concrete (UHPSSC) with basalt coarse aggregate

Experimental Investigations on Bond Behavior between FRP Bars and Advanced Sustainable Concrete

Mechanical properties of multi-scale mono/hybrid non-metallic fiber-reinforced ultra-high performance seawater sea-sand concrete

Experimental and theoretical study on bond behavior of helically wound FRP bars with different rib geometry embedded in ultra-high-performance concrete

Straight recycled green fibre pull-out behaviour in an ultrahigh performance concrete composite matrix UHPC

Bond behavior of basalt fiber reinforced polymer bars in seawater sea-sand concrete exposed to daily temperature variations

The interfacial bond properties and model for basalt fiber reinforced polymer bar in ultra-high-performance concrete subjected monotonic and reversed cyclic loading

Experimental Study on the Bond Performance between Fiber-Reinforced Polymer Bar and Unsaturated Polyester Resin Concrete

Study on the Fiber-Matrix Bonding Properties of Ultrahigh-Performance Concrete at Multiple Scales

Mechanical properties of a novel UHPC reinforced with macro basalt fibers