Abstract:Additive manufacturing (AM) is accepted as a transformative technology for rapid production of parts based on digital models through direct printing of a range of materials (e.g., metals, polymers, and ceramics). Recent advancements in the binder-jetting AM process (i.e., 3D sand-printing (3DSP)) enables direct production of sand molds and cores for metal casting. AM has been attractive to manufacturers due to the ability to produce complex and customized parts in low batch production. Traditional mold design for gravity castings experience higher scrap rates due to challenges in controlling turbulence and air entrapment. In this research, mathematically designed sprue geometries that can be produced via 3DSP are presented along with their effect on mechanical and metallurgical properties of castings through numerical modeling, computational simulation, and experimental validation. The casting properties are contrasted to conventional straight sprue castings for two different alloys: aluminum alloy 319 and gray cast iron class 30. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), computed tomography scanning (CT), and 3-point bending tests are performed to characterize microstructure, casting defects, elemental composition, and mechanical properties for castings of each gating system design. For aluminum alloy 319, a statistically significant increase of 10% in flexural strength was found using the conical-helix sprue geometry as well as a reduction of 25% in casting defects. In gray cast iron class 30, no statistically significant differences are found between the flexural strength of the conical-helix and benchmark straight sprue as expected in a short freezing range alloy.

Research on Green Casting Technology and Equipment of Digital Frozen Sand Mold

Research on forming method of additive manufacturing of frozen sand mold

Research on frozen sand mold casting technology for complex thin-walled aluminum alloy castings

Promoting sustainability in 3D printed sand casting through adaptive sand mold structures

Digital High-Efficiency Print Forming Method and Device for Multi-Material Casting Molds

Additive manufacturing and foundry innovation

Progress of Research on Numerical Simulation of Green Sand Molding Process

Carbon Emission Modeling of Sand Casting Based on Process Carbon Sources

Cooling Control for Castings by Adopting Skeletal Sand Mold Design

Research on Patternless Casting CNC Manufacturing Technology and Development of the Equipment

An influence modelling and analysis method of reducing carbon emissions for mould forming processes in patternless sand casting

Effect of freezing range on reducing casting defects through 3D sand-printed mold designs

Low Carbon Benchmarking Modeling Methodology for Sand Casting Based on Process Carbon Sources

Digital Foundry Technology For Automobile Hot Stamping Die

Retrospect of Sand Molding Casting Technology and Molding Materials in China

Research and Application of Foundry CAD/CAE System

Intelligent Casting: Empowering the Future Foundry Industry

Fabrication and posttreatment for inorganic binder jetting sand molds for casting

A review of additive manufacturing technology and its application to foundry in China

Effects of Hollow Sand Mold on the Microstructure and Mechanical Properties of a Low Pressure Aluminum Alloy Casting

Non-conventional mold design for metal casting using 3D sand-printing