Abstract:Additive manufacturing (AM) is accepted as a transformative technology for rapid production of parts based on digital models through direct printing of a range of materials (e.g., metals, polymers, and ceramics). Recent advancements in the binder-jetting AM process (i.e., 3D sand-printing (3DSP)) enables direct production of sand molds and cores for metal casting. AM has been attractive to manufacturers due to the ability to produce complex and customized parts in low batch production. Traditional mold design for gravity castings experience higher scrap rates due to challenges in controlling turbulence and air entrapment. In this research, mathematically designed sprue geometries that can be produced via 3DSP are presented along with their effect on mechanical and metallurgical properties of castings through numerical modeling, computational simulation, and experimental validation. The casting properties are contrasted to conventional straight sprue castings for two different alloys: aluminum alloy 319 and gray cast iron class 30. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), computed tomography scanning (CT), and 3-point bending tests are performed to characterize microstructure, casting defects, elemental composition, and mechanical properties for castings of each gating system design. For aluminum alloy 319, a statistically significant increase of 10% in flexural strength was found using the conical-helix sprue geometry as well as a reduction of 25% in casting defects. In gray cast iron class 30, no statistically significant differences are found between the flexural strength of the conical-helix and benchmark straight sprue as expected in a short freezing range alloy.

Research on forming method of additive manufacturing of frozen sand mold

Research on Green Casting Technology and Equipment of Digital Frozen Sand Mold

Research on frozen sand mold casting technology for complex thin-walled aluminum alloy castings

Promoting sustainability in 3D printed sand casting through adaptive sand mold structures

Additive manufacturing and foundry innovation

Digital High-Efficiency Print Forming Method and Device for Multi-Material Casting Molds

Effect of freezing range on reducing casting defects through 3D sand-printed mold designs

Fabrication and posttreatment for inorganic binder jetting sand molds for casting

Additive manufacturing-driven mold design for castings

Recycled sand for sustainable 3D-printed sand mold processes

Cooling Control for Castings by Adopting Skeletal Sand Mold Design

Determination of Interfacial Heat Transfer Coefficient at the Frozen Sand Mold Casting Process of ZL101 Alloy

Progress of Research on Numerical Simulation of Green Sand Molding Process

Integrated manufacturing method of multimaterial sand mold by binder jetting

Simulation Analysis of the Freezing Process For Achieving Bidirectional Freezing Coating Via the Freeze-Casting Technique

An influence modelling and analysis method of reducing carbon emissions for mould forming processes in patternless sand casting

Modeling and Simulation of the Casting Process with Skeletal Sand Mold

Study on the Mechanical Properties of 3D-Printed Sand Mold Specimens with Complex Hollow Structures

A review of additive manufacturing technology and its application to foundry in China

Insulation Effect of Air Cavity in Sand Mold Using 3D Printing Technology

Effects of Hollow Structures in Sand Mold Manufactured Using 3D Printing Technology