Abstract:Deep‐sea equipment is generally made of lightweight and pressure‐resistant materials in order to meet the requirements of the actual work. In order to explore marine resources better, it is necessary to research lightweight buoyancy materials for loading on mining equipment. These buoyancy materials contribute not only to providing adequate buoyancy to the mining equipment but also to reducing economic expenses. In this paper, hollow glass microspheres reinforced epoxy hollow spheres (HGMSs‐EHSs) were prepared by the rolling ball method using expanded polystyrene (EPS), epoxy resin (EP), and HGMS as raw materials. Epoxy syntactic foam (ESF) was manufactured by blending EP, curing agent, HGMS, and HGMS‐EHS with molding method. Basalt fiber (BF) reinforced ESF was fabricated by adding BFs to form a fiber network inside the syntactic foam. The results revealed that the density and compressive strength of ESF increased progressively with the number of HGMS‐EHS layers. The density and compressive strength of ESF decreased prospectively with the increase of the stacking volume fraction of HGMS‐EHS. The density and compressive strength of ESF increased gradually with the enlargement of the length and content of BF. In the range of influencing factors mentioned above, the density of ESF remains around 0.3 g/cm3, which has a low density. When the number of layers of HGMS‐EHS was two, the stacking volume fraction was 90%, the length of BF was 12 mm, the content of BF was 4%, the density of BF‐ESF was 0.316 g/cm3, and the compressive strength was 6.93 MPa. The compressive strength of prepared buoyancy material can meet the pressure resistance requirements for operations in waters of a certain depth. With a density of only 0.316 g/cm3, it provides sufficient buoyancy to balance the gravity of the equipment. Compared with the current study, in this paper, BFs were used as the reinforcing phase to prepare solid buoyancy foam with low density and high compressive strength. The experimental results demonstrate that this economical fiber material can effectively improve the compressive strength of buoyancy materials. This buoyancy material may be suitable for loading on small equipment for extracting marine resources. This work provides a reference for the preparation of low‐density solid buoyancy materials.

Study of the Compressive Properties of Heavy Calcium Carbonate-Reinforced Epoxy Composite Spheres (HC-R-EMS) Composite Lightweight Concrete

Compressive Behavior of Lightweight Concrete Using Aerogel-Reinforced Expanded Polystyrene Foams

Preparation and Compression Resistance of Lightweight Concrete Filled with Lightweight Calcium Carbonate Reinforced Expanded Polystyrene Foam

Compressive Properties of Basalt Fibers and Polypropylene Fiber-Reinforced Lightweight Concrete

Experimental Study of the Mechanical Properties and Microstructures of Lightweight Toughness Cement-Based Composites

Physical, Mechanical and Microstructural Properties of Ultra-Lightweight High-Strength Geopolymeric Composites

The effect of carbon nanofibers on fresh and mechanical properties of lightweight engineered cementitious composite using hollow glass microspheres

Hydration mechanism and mechanical properties of a developed low-carbon and lightweight strain-hardening cementitious composites

Experimental Prognostication of Ultra-High-Performance Lightweight Hybrid Fiber-Reinforced Concrete by Using Sintered Fly Ash Aggregate, Palm Oil Shell Aggregate, and Supplementary Cementitious Materials

The Effect of Dense and Hollow Aggregates on the Properties of Lightweight Self-Compacting Concrete

Mechanics, hydration phase and pore development of embodied energy and carbon composites based on ultrahigh-volume low-carbon cement with limestone calcined clay

Mechanical properties and microstructure of ultra-high strength concrete with lightweight aggregate

Development of High-Strength Light-Weight Cementitious Composites with Hollow Glass Microspheres

Research on the Development and Joint Improvement of Ceramsite Lightweight High-Titanium Heavy Slag Concrete Precast Composite Slab

Fabrication and Compression Properties of Reinforced Epoxy Syntactic Foam With Basalt Fiber

Conditions for the Preparation of Self-Compacting Lightweight Concrete with Hollow Microspheres

Experimental Study on Compressive and Flexural Performance of Lightweight Cement-Based Composites Reinforced with Hybrid Short Fibers

Hydration and microstructure evolution of a novel low-carbon concrete containing recycled clay brick powder and ground granulated blast furnace slag

Preparation and properties of ultra-high performance lightweight concrete

Development and Mechanical Characterization of HGMS–EHS-Reinforced Hollow Glass Bead Composites

Mechanical and microstructural properties of structural and non-structural lightweight foamed concrete with coal bottom ash as cement and sand replacement material