Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Reaction mechanism reduction for ethylene-fueled supersonic combustion CFD

Application of static integrated skeletal reduction and tabulation of dynamic adaptive chemistry in the combustion simulation of ethylene-fueled scramjet combustor

Development of a Highly Compact and Robust Chemical Reaction Mechanism for the Oxidation of Tetrahydrofurans under Engine Relevant Conditions

Multi-step Reduced Reaction Mechanism Simulation of Hydrogen Supersonic Combustion Process

Reaction Mechanism Reduction for Ozone-Enhanced CH4/Air Combustion by a Combination of Directed Relation Graph with Error Propagation, Sensitivity Analysis and Quasi-Steady State Assumption

Compact Chemical Mechanism for Autoignition and Combustion of Methylcyclohexane under Engine Relevant Conditions

Simulations of cavity-stabilized flames in supersonic flows using reduced chemical kinetic mechanisms

Modeling of a Reduced Hybrid H2–Air Kinetic Scheme Integrating the Effect of Hypersonic Reactive Air with Supersonic Combustion

Assessment Of Chemical Mechanism And Chemical Reaction Sensitivity Analysis For Ch4/H-2 Flame Under Mild Combustion Environment

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

The Mechanism and Kinetic Analysis of C4h4 + C4h4 (But-1-ene-3-yne) Reaction with Features of H-Transfer in Combustion

On the Development of Detailed and Reduced Reaction Mechanisms for Combustion Modeling

Chemical Kinetic Mechanism of A Three-Component Fuel Composed of Iso-Octane/N-Heptane/Ethanol

Development of a reduced n-heptane/toluene/tetrahydrofuran mechanism for dual-fuel engine combustion prediction

Reduced Mechanism for the Oxidation of Ethene

Construction of reduced chemical mechanisms orientated toward specific applications: a case study of primary reference fuel

A Novel Approach to Constructing Reactivity-Based Simplified Combustion Model for Dual Fuel Engine

Implementation of Reduced Mechanism by CSP in Supersonic Reacting Flow

Development and Reduction of n-Tetradecane Mechanism for Low Temperature Ignition and Combustion

ASSESSMENT OF CHEMICAL MECHANISM AND CHEMICAL REACTION SENSITIVITY ANALYSIS FOR CH<sub>4</sub>/H<sub>2</sub> FLAME UNDER MILD COMBUSTION ENVIRONMENT

Development of a Skeletal Chemical Kinetic Mechanism for TRF/NH3 Combustion