Catalytic co-pyrolysis characteristics and kinetics analysis of food waste and chinar leaves, and the large-scale microwave disposal feasibility

Jialiang Xu,Samuel Mbugua Nyambura,Chao Li,Jufei Wang,Hua Li,Xueru Zhu,Xuebin Feng,Wei Luo
DOI: https://doi.org/10.1007/s13399-023-03945-z
IF: 4.05
2023-03-01
Biomass Conversion and Biorefinery
Abstract:Food waste pyrolysis has been reported widely these years. However, rare research discusses its industrial possibilities due to its high moisture content. This research focuses on the microwave co-pyrolysis of food waste and chinar leaves to tune the moisture and seek for solution. To find the optimal path for microwave co-pyrolysis of raw food waste (69 wt.% moisture) and chinar leaves, thermal characteristics, catalysts (Na 2 CO 3 and MgO), and kinetics (KAS, OFW, Friedman) were conducted to reveal the pyrolysis behaviors and apparent activation energy in all conditions. Lastly, techno-economic analysis was done to estimate the operating costs of large-scale microwave co-pyrolysis. Results showed that Na 2 CO 3 and MgO both suppressed the secondary pyrolysis between 355 and 398 °C, which is consistent with the modified Broido–Shafizadeh model, respectively. Importantly, CL75-FW25-Na 2 CO 3 performed higher pyrolysis rates between 306.7 and 471.7 °C, and the presence of 5% alkali metal salt significantly lowered the apparent activation energy (from 195.2 to 122.4 kJ/mol, KAS). Moreover, it was found that the biogas collected from 250 to 800 °C contained a total of 26.5% H 2 , 17% C 2 H 6 , and 20.9% C 2 H 4 . The large-scale production cost of microwave co-pyrolysis of raw mixed food waste and chinar leaves is estimated to be USD 536.72 /ton. This research demonstrates that alkali metal salt and synergistic effects between food waste and chinar leaves can optimize the co-pyrolysis process, and its catalytic microwave co-pyrolysis also presents potential economic feasibility for the efficient disposal of solid municipal waste and clean biogas production.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?