Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Modelling of Nonthermal Dielectric Barrier Discharge Plasma at Atmospheric Pressure and Role of Produced Reactive Species in Surface Polymer Microbial Purification

Rapid Disinfection Performance of a Touchable Pulsed SDBD Nonthermal Plasma

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Atmospheric pressure dielectric barrier discharge plasma for in-situ water treatment using a bubbling reactor

A Novel Approach on Dielectric Barrier Discharge Using Printed Circuit Boards

Sterilizing Processes and mechanisms of Escherichia coli treated by DBD Plasma.

Plasma for Air and Water Sterilization

Chemical Mechanisms of Bacterial Inactivation Using Dielectric Barrier Discharge Plasma in Atmospheric Air

Proposing an Affordable Plasma Device for Polymer Surface Modification and Microbial Inactivation

Degradation of organic compounds and production of activated species in Dielectric Barrier Discharges and Glidarc reactors

DBD Plasma as a Practical Approach to Sterilization of Dental Instruments

Surface Sterilization By Atmospheric Pressure Non-Thermal Plasma

Processing of COx Molecules in CO2/O2 Gas Mixture by Dielectric Barrier Discharge: Understanding the Effect of Internal Parameters of the Discharge

Enhancing Microorganism Inactivation Performance Through Optimization of Plate-to-plate Dielectric Barrier Discharge Cold Plasma Reactors

Dielectric barrier discharge plasma promotes disinfection-residual-bacteria inactivation via electric field and reactive species

The Cold and Atmospheric-Pressure Air Surface Barrier Discharge Plasma for Large-Area Sterilization Applications

A low power flexible dielectric barrier discharge disinfects surfaces and improves the action of hydrogen peroxide

Inactivating Microorganism on Medical Instrument Using Plasma Jet

Grating-like DBD plasma for air disinfection: Dose and dose-response characteristics

Space Sterilization Effect Through High-Density Plasma Ozone Using DBD Device

Mode Transition of Air Surface Micro-Discharge and Its Effect on the Water Activation and Antibacterial Activity