Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Isolation and biological characterization of staphyloferrin B, a compound with siderophore activity from staphylococci.

Rapid Disinfection Performance of a Touchable Pulsed SDBD Nonthermal Plasma

Air Disinfection by Nanosecond Pulsed DBD Plasma

Bactericidal Effect of Various Non-Thermal Plasma Agents and the Influence of Experimental Conditions in Microbial Inactivation: A Review

Energy efficiency optimization for H2S removal by dielectric barrier discharge plasma

Radiological case of the month. Hyperthyroidism as a cause of superior mesenteric artery syndrome.

Water disinfection by pulsed atmospheric air plasma along water surface

State-of-the-art non-thermal plasma disinfection and medicine

Experimental Study on Bacteria Disinfection Using a Pulsed Cold Plasma Jet with Helium/oxygen Mixed Gas

Dielectric barrier discharge plasma promotes disinfection-residual-bacteria inactivation via electric field and reactive species

Sterilizing Processes and mechanisms of Escherichia coli treated by DBD Plasma.

A low power flexible dielectric barrier discharge disinfects surfaces and improves the action of hydrogen peroxide

Rapid Inactivation of Biological Species in the Air Using Atmospheric Pressure Nonthermal Plasma

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Surface Sterilization By Atmospheric Pressure Non-Thermal Plasma

Experimental assessment of low temperature plasma devices for bacterial aerosol inactivation in the air duct of HVAC systems

A Novel Approach on Dielectric Barrier Discharge Using Printed Circuit Boards

Surface Decontamination by Atmospheric Pressure Plasma Jet: Key Biological Processes

FACTORS INFLUENCING DISINFECTION EFFICACY OF ATMOSPHERIC PRESSURE GLOW DISCHARGE PLASMA

Evaluation of zone disinfection by air-passable plasma filter in a novel chamber model

A simple and effective aerosol pathogen disinfection test for a flowing air disinfector