Abstract:The excavation of a new high-speed railway causes the side slope adjacent to the existing line foundation to become airborne, and the excessive dynamic deformation or cumulative deformation caused by the dynamic load of trains will affect the normal service of the subgrade, even leading to its instability. To date, there are no relevant experimental data regarding this, and there is also a lack of corresponding specifications. The only available numerical simulation research results need to be verified in practice. Therefore, this study relies on the Shanghai–Nanjing intercity high-speed railway construction project adjacent to the existing Beijing–Shanghai line to carry out a subgrade dynamic response test to ensure the safe operation of the existing line. The test obtained the vibration displacement, frequency, acceleration, and other parameters of the existing subgrade construction in three stages: subgrade excavation, pile formation, and subgrade filling. From the test results: During the test period, the vertical surface vibration displacement and vibration acceleration have a certain attenuation along the depth direction. In the stage of subgrade excavation, the vibration displacement and vibration acceleration generated are the largest. The vertical vibration displacement amplitude reaches 1.9 mm, and the horizontal vibration displacement amplitude reaches 0.15 mm. The vibration frequency of the roadbed under the action of the train load is concentrated in the range of 0–50 Hz, and the vibration energy at the peak value is relatively large, which reflects the load action frequency of the train, and the peak value is mainly concentrated in the range of 20–40 Hz. These results show that the maximum vibration response peak appears in the subgrade excavation stage, that is, the most dangerous stage of the existing subgrade. The vibration acceleration and vibration displacement of each dynamic response parameter are important in that they reflect the dynamic performance of the subgrade and establish the index control standard, which can be used as a control index for roadbed dynamic stability monitoring. The dynamic test of the subgrade state provides data support for the reasonable opening of the construction skylight and the protection of the excavation slope. Taking into account the impact of piling vibration, technical measures such as static pressure, jumping construction, and setting up stress relief holes are adopted. The test results and engineering measures ensure the safe operation of the existing subgrade, and have important theoretical significance for guiding the construction of the new subgrade adjacent to the existing line.

Field assessment of a subgrade-culvert transition zone constructed with foamed concrete in the ballasted railway

MODEL TEST ON REENFORCEMENT MECHANISM OF GEOGRID-STEEL TUBE EXPANSIVE SOIL RETAINING WALL FOR SLOPE STABILITY OF NANKUN RAILWAY

Field Investigation of the Dynamic Response of Culvert–Embankment–Culvert Transitions in a High-Speed Railway

Field Test Study on the dynamic response of the cement-improved expansive soil subgrade of a heavy-haul railway

Analysis of the Deep-Seated Concrete Slab for Settlement Control at Bridge Approach Embankment

Long-term monitoring and analysis of the longitudinal differential settlement of an expressway bridge–subgrade transition section in a loess area

Study on Dynamic Characteristics of Cement-Stabilized Expansive Soil Subgrade of Heavy-Haul Railway under Immersed Environment

Field test and numerical analysis of transversal dynamic characteristics of pile groins due to tidal bores

Case Study of the Deep-Seated Concrete Slab for Settlement Control at Bridge Approach Embankment

Dynamic Performance of Pile-supported Bridge-embankment Transition Zones under High-speed Train Moving Loads

Investigation on Dynamic Stability of Cement-Stabilized Expansive Soil Subgrades Subjected to Repeated Heavy-Haul Train Loads

Subgrade vibrations and long-term stability of an embankment-bridge transition zone in non-ballasted high-speed railway

3D FINITE ELEMENT ANALYSIS OF DYNAMIC RESPONSE OF SUBGRADE AND THE COUNTERMEASURES IN BRIDGE-SUBGRADE TRANSITION SECTION

An Experimental Study on A Culvert Buried in Granular Soil Subjected to Vehicle Loads

Model test study on the dynamic response of high-speed railway subgrade crossing ground fissure zone

Finite Element Analysis Study of Box Culvert Jacking-Out Construction under Existing Railway Line

Experimental Study on the Dynamic Features of Cement-Stabilized Expansive Soil As Subgrade Filling of Heavy Haul Railway

Experimental Study and Numerical Simulation on Failure Process of Reinforced Concrete Box Culvert

Research on Dynamic Response and Construction Safety Countermeasures of an Adjacent Existing Line Foundation under the Influence of a New Railway Line

Investigation of Concrete Base-Roadbed Surface Contact Variation-Induced Vibration Characteristics of Vehicle-Slab Track-Subgrade System considering Fluid-Solid Interaction

Research on dynamic response and fatigue life of tunnel bottom structure under coupled action of train load and groundwater