Abstract:Compared with the traditional reinforced concrete and masonry culvert engineering, the corrugated steel pipe culvert structure has excellent construction and use performance. There are many mechanical calculation methods for corrugated steel pipe culverts, but there are certain limitations due to different degrees of simplification of the calculation model. Aiming at the stress and deformation characteristics of flexible high-filled corrugated steel pipe culverts under the action of soil filling, this paper selects the trough section in the middle of the culvert axis, the trough section in the middle of the culvert axis, the trough section at the entrance of the culvert, and the culvert through filling and static load tests. The four corrugated steel corrugated pipe culvert sections at the wave crest section of the cave entrance are equipped with strain gauges, earth pressure cells and deformation measuring instruments to study the stress, strain, and displacement mechanical characteristics of the corrugated steel pipe culvert, and obtain the mechanical deformation characteristics of the corrugated steel pipe culvert under static load. The law of deformation. The research results show that: 1) Under the load of the same fill height, the vertical stress of the corrugated steel pipe culvert is smaller than the vertical stress of the soil without a culvert. The pressure is greater than the stress in the soil at the same height; 2) Due to the different directions of the surrounding earth pressure on the pipe culvert during the filling process, tension and compression changes occur at multiple locations, and the strain at the top and waist of the pipe culvert is often larger, so this point is a weak point relative to other measuring points.

An Experimental Study on A Culvert Buried in Granular Soil Subjected to Vehicle Loads

Model test and numerical simulation of earth pressure on culvert under different earth backfill conditions

Model Tests and Theoretical Studies on Earth Pressure on Shallow Positive Buried Culverts

Research on bearing behaviour of buried double corrugated steel culvert with high fill considering spacing effect

Numerical analysis of the earth pressures and internal forces of the culvert with surrounding grouting and reinforcement

Experimental study and numerical analysis of seismic response of embedded large-span corrugated steel culvert

Experiments and Numerical Simulation of the Reinforcement Effect of Channel-Steel-reinforced Shield Tunnel Segments under Unloading Conditions

Numerical performance assessment of buried corrugated metal culvert subject to service load conditions

Full-Scale Experiment and Ultimate Bearing Capacity Assessment of Reinforced Concrete Drainage Culverts with Defects

Numerical Simulation on Load Reduction by Reinforcement Bridge of Culvert Beneath High Filling

Model Test Study on the Influence of Ground Surcharges on the Deformation of Shield Tunnels

Model Test on the Influence of Surcharge, Unloading and Excavation of Soft Clay Soils on Shield Tunnels

Analysis of the Impact of Vehicle Loads on Submerged Tunnels in Areas of Soft Soil

Mechanical deformation characteristics of corrugated steel pipe culvert under static load

Experimental and Finite Element Analysis of Precast Reinforced Concrete U-Shaped Box Culvert

Experimental Study and Theoretical Analysis of the Effect of Surcharge/Unloading at Both Sides of the Ground Surface on an Existing Shield Tunnel at Different Burial Depths

Effects of Corrugated Steel Pipe Parameters on the Stress and Deformation of a Highway Subgrade Culvert

Study on Dynamic Response of Embedded Long Span Corrugated Steel Culverts Using Scaled Model Shaking Table Tests and Numerical Analyses

Comparative Experimental Study and FE Analysis of Corrugated Steel Pipe Culverts with Different Stiffness

Experimental Study and Numerical Simulation on Failure Process of Reinforced Concrete Box Culvert

Analysis of the Deep-Seated Concrete Slab for Settlement Control at Bridge Approach Embankment