Abstract:This paper presents a multiscale analysis of the classical borehole instability problem in high‐porosity sandstones using a hierarchical multiscale approach. A rigorous, two‐way message‐passing coupling of finite element method and discrete element method is employed, where the finite element method is employed to solve a boundary value problem and the constitutive material responses required at each of its integration points are derived by the discrete element method solution to an embedded representative volume element instead of by using an assumed phenomenological model. We employ this multiscale approach to examine the successive failure of a borehole subjected to gradually decreased support stresses at the inner borehole wall or increased far‐field stresses. To reproduce the material behavior of high‐porosity sandstone, representative volume elements with a high‐porosity structure and interparticle bonds are generated. It is found that stress concentration triggers the initial failure at the borehole wall, and the subsequent failure in form of deformation bands is driven by further stress concentration ahead of the band tips. The failure pattern around the borehole varies with initial stress state and global loading path. The comparison of the local stress paths of the initial failure points in various cases reveals that the change of failure pattern from shear failure to mixed‐mode failure and to compaction failure is dominated by the increased mean stress. Cross‐scale parametric studies show that the failure mode changes from clear compaction bands to multiple arrays of shear bands by changing the high‐porosity specimen to a low‐porosity one. The increase in cohesion strength expands the yield locus and enlarges the critical mean stress between different failure patterns. Hence, the failure mode may change from compaction failure to mixed‐mode failure or from mixed‐mode failure to shear failure due purely to the increased cohesion strength. The qualitative comparisons indicate greater length, larger area, and more severe damage of the diametrically opposite failure with the increase in minor principal stress σ0 and principal stress ratio. The diametrically opposite failure mode is found a good indicator for σ0 direction, but it may also occur under hydrostatic far‐field stress due to material anisotropy.

Effect of heterogeneity on mechanical and micro-seismic behaviors of sandstone subjected to multi-level cyclic loading: A discrete element method investigation

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Multiscale Insights into Borehole Instabilities in High‐Porosity Sandstones

Numerical simulation of strength and failure analysis of heterogeneous sandstone under different loading rates

Discrete Element Analysis Of The Effect Of Meso-Structure Heterogeneity On The Mechanical Behavior Of Rock

Influence of rock heterogeneity on hydraulic fracturing: A parametric study using the combined finite-discrete element method

Numerical study on sandstone strength and failure characteristics with heterogeneous structure

Numerical Simulation of Crack Propagation and Branching Behaviors in Heterogeneous Rock-like Materials

Investigations on the compression-shear coupled stress waves propagating in heterogeneous rock

Effect of Microstructure Heterogeneity on Shale Strength: Insights from Micro-CT Imaging and Numerical Simulations

Effect of heterogeneity of particle properties on variability of laboratory sandy soil properties: A random discrete element perspective

Effect of intermittent joint distribution on the mechanical and acoustic behavior of rock masses

Effect of Fracture Heterogeneity on Rock Mass Stability in a Highly Heterogeneous Underground Roadway

Numerical Simulations of the Soil-Rock Mixture Mechanical Properties Considering the Influence of Rock Block Proportions by PFC2D

A Numerical Meso-Scale Elasto-Plastic Damage Model for Modeling the Deformation and Fracturing of Sandstone Under Cyclic Loading

Numerical simulations on the structural heterogeneity and fracture bias effect of three-point bending specimen

Mechanical Behavior and Acoustic Emission Characteristics of Sandstone Under Different Cyclic Loading and Unloading Disturbance Rates

Peridynamics simulation and influence law analysis considering rock microscopic properties

Digital Microscopic Multiphase Heterogeneity Representation and Its Effects on Micromechanics and Cracking Behaviors of Geomaterials

A statistical bonded particle model study on the effects of rock heterogeneity and cement strength on dynamic rock fracture

3D continuum-discrete coupled modelling of triaxial Hopkinson bar tests on rock under multiaxial static-dynamic loads